THERMOPLASTIC SEWAGE PUMP 4/10 HP Capable
of pumping solids up to 2". Ideal for basement installations, pumping below
grade toilets, laundry facilities, underground parkings, grain storage and
construction sites. Durable, corrosion resistant, thermoplastic
construction. Energy-efficient motor for lower operation costs. Includes
by-pass float switch. Automatic or manual operation. 1/2 horsepower. Flotec
Durable, corrosion-resistant thermoplastic
construction with 2" solids handling makes the FPSE3200A a great candidate
for variety of wastewater applications.
KEY FEATURES
Automatic submersible sewage pump
Capable of handling 2" solids - ideal for basement installations, pumping
below grade toilets, laundry facilities, underground parking, grain storage
and construction sites
Durable, corrosion-resistant thermoplastic construction
WARRANTY
1 year limited warranty
Specs:
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 5250 GPH
FLOW AT 10' LIFT: 2550 GPH
SWITCH TYPE: Tethered
SWITCH ON LEVEL: 12-1/2"
SWITCH OFF LEVEL: 5-1/2"
MINIMUM SUMP DIAMETER:
MINIMUM SUMP DEPTH:
DISCHARGE PIPE SIZE: 2"
MINIMUM PIPE SIZE: 2" for sewage applications / 1-1/2" for effluent
applications
MAXIMUM SOLID HANDLING SIZE: 2"
CORD LENGTH: 15'
AMP DRAW: 8.5 amps
VOLTAGE: 115v, 60 Hz
RECOMMENDED BREAKER: 15 amps
LIQUID TEMP RANGE:
AGENCY LISTING: CSA and CUS
ACCESSORIES INCLUDED: none
SUBMERSIBLE SUMP PUMP
Sewage pump capable of handling 2" solids. Ideal for basement installation,
pumping below-grade toilets, laundry facilities and general dewatering.
Rugged, cast iron construction maximizes pump life. 1/2HP motor with
overload protection provides safe operation. Easy installation, requires
minimum 18" dia. sewage basin. Manufactured by
Simer.
Sku 75725-97, Model 3263,
$209.99 each
SUBMERSIBLE THERMOPLASTIC SUMP PUMP
1/4 HP
'Sta-Dry' Automatic. Wide angle mechanical switch. Completely submersible.
Strong Thermax cap and volute. Thermally protected motors. Corrosion
resistant epoxy powder coat gloss finish. Non-clogging open type impeller.
Permanently lubricated bearings. Convenient carrying handle. 8' power cord.
Starts at 13 inches. Shuts off at 4 inches. Manufactured by Flotec
These Sump Pumps provide carefree performance and
quiet operation. Tethered on/off float switch allows for maximum water
discharge per cycle.
KEY FEATURES
Automatic corrosion-resistant submersible sump pump (automatic or manual
operation)
1-1/4" or 1-1/2" discharge pipe size
Cbe used in 14" diameter or larger sump basin
WARRANTY
1 year limited warranty
SUBMERSIBLE THERMOPLASTIC SUMP PUMP
1/3 HP
'Sta-Dry' Automatic. Wide angle mechanical switch. Completely submersible.
Strong Thermax cap and volute. Thermally protected motors. Corrosion
resistant epoxy powder coat gloss finish. Non-clogging open type impeller.
Permanently lubricated bearings. Convenient carrying handle. 8' power cord.
Starts at 13 inches. Shuts off at 4 inches. Manufactured by Flotec
These Sump Pumps provide carefree performance and
quiet operation. Tethered on/off float switch allows for maximum water
discharge per cycle.
KEY FEATURES
Automatic corrosion-resistant submersible sump pump (automatic or manual
operation)
1-1/4" or 1-1/2" discharge pipe size
Cbe used in 14" diameter or larger sump basi
WARRANTY
3 year limited warranty
Specs:
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 2760 GPH
FLOW AT 10' LIFT: 2160 GPH
SWITCH TYPE: Tethered
SWITCH ON LEVEL: 13
SWITCH OFF LEVEL: 6"
MINIMUM SUMP DIAMETER: 14"
MINIMUM SUMP DEPTH: 16"
DISCHARGE PIPE SIZE: 1-1/4" FNPT / 1-1/2" MNPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE: 1/4"
CORD LENGTH: 8'
AMP DRAW: 9 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amp
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
AGENCY LISTING: CSA and CUS
ACCESSORIES INCLUDED: none
1/3 HP - Sku 30531-21, Model FP0S2400A, $109.99 each
SUBMERSIBLE SUMP PUMP
'Sta-Dry' Automatic. Wide angle mechanical switch. Completely submersible.
Strong Thermax cap and volute. Thermally protected motors. Corrosion
resistant epoxy powder coat gloss finish. Non-clogging open type impeller.
Permanently lubricated bearings. Convenient carrying handle. 8' power cord.
Starts at 13 inches. Shuts off at 4 inches. 2-year warranty. Manufactured by
Flotec
1/2 HP - Sku 73820-05, Model 309996-01, $139.99 each
SUBMERSIBLE CAST IRON SUMP PUMP 1/2
HP, VERTICAL SWITCH
Automatic. Rugged cast-iron construction with screened bottom inlet.
Oil-cooled, high torque, 115V motor with automatic overload protection.
Maximum pumping capacity of 3630 gallons per hour. Can be used in narrow 10"
diameter sump basin. Vertical float switch. 1/2 HP. Manufactured by
Flotec
Automatic submersible sump pumps
provide reliable protection and performance against flooded basements.
Vertical on/off float switch can be used in smaller sump basins.
KEY FEATURES
Automatic submersible cast iron sump pump
1-1/2" discharge pipe size
Maximum pumping capacities to 4680 GPH
Can be used in 10" diameter or larger sump basin
WARRANTY
5 year limited warranty
SPECS:
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 4380 GPH
FLOW AT 10' LIFT: 3840 GPH
SWITCH TYPE: Vertical
SWITCH ON LEVEL: 7-1/2"
SWITCH OFF LEVEL: 3"
MINIMUM SUMP DIAMETER: 10"
MINIMUM SUMP DEPTH: 10"
DISCHARGE PIPE SIZE: 1-1/2" Female NPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE: 3/8"
CORD LENGTH: 10'
AMP DRAW: 6.3 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amps
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
AGENCY LISTING: CSA
ACCESSORIES INCLUDED: none
SUBMERSIBLE CAST IRON SUMP PUMP 1/3
HP, VERTICAL SWITCH
Automatic operation. Replaces pedestal sump pumps. Durable, cast-iron and
stainless steel construction. Corrosion resistant. Fits 14" sumps or larger.
Energy-efficient, providing lower operating costs. 3-year warranty. Manufactured by
Flotec
Automatic submersible sump pumps
provide reliable protection and performance against flooded basements.
Vertical on/off float switch can be used in smaller sump basins.
KEY FEATURES
Automatic submersible cast iron sump pump
1-1/2" discharge pipe size
Vertical float switch can be used in 10" diameter or larger sump basin
WARRANTY
3 year limited warranty
Specs:
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 4020 GPH
FLOW AT 10' LIFT: 3540 GPH
SWITCH TYPE: Vertical
SWITCH ON LEVEL: 7-1/2"
SWITCH OFF LEVEL: 3"
MINIMUM SUMP IDAMETER: 10"
MINIMUM SUMP DEPTH: 10"
DISCHARGE PIPE SIZE: 1-1/2" Female NPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLIDS HANDLING SIZE: 3/8"
CORD LENGTH: 10'
AMP DRAW: 5.8 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amps
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
AGENCY LISTING: CSA
ACCESSORIES INCLUDED: none
1/3 HP - Sku 73815-77, Model
FPSC2250A, $154.99 each
3/4 HP - Sku 73819-32, Model FPSC4500A, $274.99 each
SUBMERSIBLE CAST IRON SUMP PUMP 1/3
HP, TETHERED SWITCH
Cast iron automatic submersible sump pump with a screened inlet. Oil-cooled,
high torque 115V, 5.8A motor with automatic overload protection. Maximum
pumping capacity to 16580 liters per hour (4380 gal./h). Can be used in
narrow 35.6cm (10") diameter sump basin. Manufactured by
Flotec
Automatic submersible sump pumps
provide reliable protection and performance against flooded basements to
ensure your peace of mind. Tethered on/off float switch allows for maximum
water discharge per cycle.
KEY FEATURES
Automatic submersible cast iron sump pump
1-1/2" discharge pipe size
Tethered float switch can be used in 14" diameter or larger sump basin
WARRANTY
3 year limited warranty
Specs:
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 4020 GPH
FLOW AT 10' LIFT: 3540 GPH
SWITCH TYPE: Tethered
SWITCH ON LEVEL: 13"
SWITCH OFF LEVEL: 5"
MINIMUM SUMP DIAMETER: 14"
MINIMUM SUMP DEPTH: 18"
DISCHARGE PIPE SIZE: 1-1/2" Female NPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE: 3/8"
CORD LENGTH: 10'
AMP DRAW: 5.8 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amp
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
AGENCY LISTING: CSA
ACCESSORIES INCLUDED: none
SUBMERSIBLE SUMP PUMP
Automatic or manual operation. For 14" or more sumps. Rugged cast-iron
construction for maximized pump life. Heavy duty motor with automatic
overload protection for safe operation. Includes by-pass float switch.
2-year warranty. 1/3 HP. Manufactured by
Wicor Canada.
Sku 73820-54, Model 309960-01,
$154.99 each
SUBMERSIBLE CAST IRON SUMP PUMP 1/2
HP, TETHERED SWITCH
Automatic operation. Durable, cast-iron and stainless steel construction
resists corrosion. Fits in 14" sump or larger. Maximum pumping capacity to
4680 gallons per hour. Energy-efficient model for lower operating costs. 1/2
HP. Manufactured by
Flotec
Automatic submersible sump pumps
provide reliable protection and performance against flooded basements to
ensure your peace of mind. Tethered on/off float switch allows for maximum
water discharge per cycle.
KEY FEATURES
Automatic submersible cast iron sump pump
1-1/2" discharge pipe size
Can be used in 14" diameter or larger sump basin
WARRANTY
3 year limited warranty
Specs
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 4380 GPH
FLOW AT 10' LIFT: 3840 GPH
SWITCH TYPE: Tethered
SWITCH ON LEVEL: 13"
SWITCH OFF LEVEL: 5"
MINIMUM SUMP DIAMETER: 14"
MINIMUM SUMP DEPTH: 18"
DISCHARGE PIPE SIZE: 1-1/2" Female NPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE: 3/8"
CORD LENGTH: 10'
AMP DRAW: 6.3 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amp
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
AGENCY LISTING: CSA
ACCESSORIES INCLUDED: none
THERMOPLASTIC PEDESTAL SUMP PUMP
1/3 HP
Ideal for use in home basements, garages, barns and cottages. Economy model.
Corrosion resistant THERMAX thermoplastic base and column. Automatic
overload protection. Fits any pit from 12" (30,5 cm) diameter or larger.
Attaches to 1-1/4" (3,2 cm) PVC pipe. Includes: 1/3 HP, 115 V, 3,5 A motor.
Non-clog impeller. THERMAX thermoplastic base and column. Top-mounted
rod-type switch. Corrosion resistant float rod. Durable plastic adjustable
float. 6' (1.8 m) power cord. Can be used as a portable pump or permanently
installed. 1 year warranty. For replacement switch, see item 73645-24. Manufactured by
Flotec
The pedestal design is engineered for
the easy installation and replacement of most other brands of pedestal
pumps.
KEY FEATURES
Replaces any existing brand of 1/3 HP pedestal pump
Long lasting thermoplastic construction
Quick, easy installation
Fits in a 12" diameter basin and offers a 1-1/4" discharge
WARRANTY
1 year limited warranty
Specs:
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 3000 GPH
FLOW AT 10' LIFT: 2400 GPH
SWITCH TYPE: Vertical
SWITCH ON LEVEL: 10-1/2"
SWITCH OFF LEVEL: 2-1/2"
MINIMUM SUMP DIAMETER: 12"
MINIMUM SUMP DEPTH: 12"
DISCHARGE PIPE SIZE: 1-1/4" FNPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE:
CORD LENGTH: 6'
AMP DRAW: 3.5 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amps
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
AGENCY LISTING: CSA and CUS
ACCESSORIES INCLUDED: none
SINK PUMP SYSTEM Alternative direct drain sink pump system - ideal for washing machines,
wet bars, air conditioning and dehumidifier drainage. Easy installation -
eliminates need for expensive plumbing renovation. Maximum pumping
capacities up to 2880 GPH. Heavy-duty 6 gallon structural foam drainage
tank. Model FP0S1800LTS - 1/4 HP. Chrome and black. Flotec
The Sink Pump System is an economical, above-floor,
corrosion-resistant pump system for home gray water handling applications.
KEY FEATURES
Alternative direct drain sink pump system - ideal for washing machines, wet
bars, air conditioning and dehumidifier drainage
Easy installation - eliminates need for expensive plumbing renovation
Heavy-duty 6 gallon structural foam drainage tank
WARRANTY
1 year limited warranty
2 WIRE 4 INCH SUBMERSIBLE WELL PUMP, 230 VOLTS, 1/2 HP For
wells with 4" diameter or more. Pumps up to depths of 400 ft. Patented
floating stack design for sand resistance and reduced sand locking.
Corrosion-resistant, stainless steel pump, motor housing and discharge. Head
with internal check valve (removal). 3-year warranty.
Manufactured by Flotec
4" Submersible Pumps
are the most economical, energy-efficient pumps for 4" wells or larger. They
provide the optimum amount of water and pressure for general home and farm
use.
KEY FEATURES
For 4" inside diameter or larger wells
Pumps from depths of 150ft
Patented Floating Stack design for sand resistance and reduced sand locking
Corrosion-resistant stainless steel pump and motor housing
WARRANTY
3 year limited warranty
Specs:
BODY CONSTRUCTION: Stainlesss Steel
NUMBER OF WIRES: 2 plus ground
HORSEPOWER: 1/2
PERFORMANCE SERIES: 10 GPM
STAGES: 7
MAXIMUM CAPACITY: 13.6 GPM
OPERATING RANGE: 20' to 150'
MAXIMUM DEPTH-TO-WATER: 150'
MAX PSI: 105 psi
PUMP DIAMETER:
DISCHARGE PIPE SIZE: 1-1/4"
AMP DRAW:
VOLTAGE: 230v, 60 Hz
RECOMMENDED BREAKER: 10 amp
AGENCY LISTING:
ACCESSORIES INCLUDED: none
2 WIRE 4 INCH SUBMERSIBLE WELL PUMP, 230 VOLTS, 1 HP For
wells with 4" diameter or more. Pumps up to depths of 400 ft. Patented
floating stack design for sand resistance and reduced sand locking.
Corrosion-resistant, stainless steel pump, motor housing and discharge. Head
with internal check valve (removal). 3-year warranty.
Manufactured by Flotec
4" Submersible Pumps
are the most economical, energy-efficient pumps for 4" wells or larger. They
provide the optimum amount of water and pressure for general home and farm
use.
KEY FEATURES
For 4" inside diameter or larger wells
Pumps from depths of 300ft
Patented Floating Stack design for sand resistance and reduced sand locking
Corrosion-resistant stainless steel pump and motor housing
WARRANTY
3 year limited warranty
Specs:
BODY CONSTRUCTION: Stainless Steel
NUMBER OF WIRES: 2 plus ground
HORSEPOWER: 1
PERFORMANCE SERIES: 10 GPM
STAGES: 7
MAXIMUM CAPACITY: 15.6 GPM
OPERATION RANGE: 20' to 300'
MAXIMUM DEPTH-TO-WATER: 300'
MAX PSI: 170 psi
PUMP DIAMETER:
DISCHARGE PIPE SIZE: 1-1/4" NPT
AMP DRAW:
VOLTAGE: 230v 60 Hz
RECOMMENDED BREAKER: 20 amp
AGENCY LISTING:
ACCESSORIES INCLUDED: none
3 WIRE 4 INCH SUBMERSIBLE WELL PUMP, 230 VOLTS, 1/2 HP, 10 GPM
For
wells with 4" diameter or more. Pumps up to depths of 400 ft. Patented
floating stack design for sand resistance and reduced sand locking.
Corrosion-resistant, stainless steel pump, motor housing and discharge. Head
with internal check valve (removal). 3-year warranty.
Manufactured by Flotec
4" Submersible Pumps
are the most economical, energy-efficient pumps for 4" wells or larger. They
provide the optimum amount of water and pressure for general home and farm
use.
KEY FEATURES
For 4" inside diameter or larger wells
Pumps from depths of 150ft
Patented Floating Stack design for sand resistance and reduced sand locking
Corrosion-resistant stainless steel pump and motor housing
WARRANTY
3 year limited warranty
Specs:
BODY CONSTRUCTION: Stainless steel
NUMBER OF WIRES: 3 plus ground
HORSEPOWER: 1/2
PERFORMANCE SERIES: 10 GPM
STAGES: 7
MAXIMUM CAPACITY: 13.6 GPM
OPERATING RANGE: 20' to 150'
MAXIMUM DEPTH-TO-WATER: 150'
MAX PSI: 105 psi
PUMP DIAMETER:
DISCHARGE PIPE SIZE: 1-1/4" NPT
AMP DRAW:
VOLTAGE: 230v, 60 Hz
RECOMMENDED BREAKER: 10 amp
AGENCY LISTING:
ACCESSORIES INCLUDED: Control Box
STAINLESS STEEL SUBMERSIBLE UTILITY PUMP
1/4 HP
Utility pump premium submersible stainless steel construction. Superior
corrosion resistance. Ultimate dependability, extra-durable for heavy-duty
use. "HeatXchange motor chamber" engineered for cool operation under
continuous use. Maximum drawdown, pumps standing water down to 1/8" from the
floor. 1/4 HP. Flotec
Stainless Steel Utility
Pump is excellent for harsher environments. Will pump standing water down to
1/8".
KEY FEATURES
Superior corrosion resistance
Ultimate dependability HeatXchange ™ motor chamber engineered for cool
operation under continuous use
Maximum drawdown - standing water down to 1/8"
WARRANTY
Limited lifetime warranty
BODY CONSTRUCTION:
Stainless Steel
MAXIMUM CAPACITY: 1140 GPH
HORSEPOWER: 1/4
EFFLUENT PUMP
Self-priming. Capable of handling 3/4" solids. Ideal for pumping sump water
or septic tank effluents to sewer lines, mound systems or leaching fields.
Rugged cast-iron construction maximizes pump life. Includes check valve and
carrying handle. 1/2 horsepower. Wicor Canada
Sku 73820-47, Model 560549, $209.99 each
MULTIPLE USE SUBMERSIBLE PUMP
Portable and versatile. Transfers water from window wells, basements, roofs
or shallow flooded areas. Durable, thermoplastic and stainless steel
construction. Corrosion resistant. Easy-to-use. Includes 8 ft. power cord
and garden hose adapter. Height: 10", diameter: 6". 1-year warranty. 1/4 HP.
Wicor Canada
Sku 73826-58, Model 306666,
$104.99 each
SEWAGE PUMP SYSTEM - 4/10 HP
Economical sewage pump system made of durable thermoplastic. Ideal for
basement installations, pumping below-grade toilets and laundry facilities.
Includes pump (FPSE3200A), 30-gallon (31" height x 21" diameter) basin and
lid assembly, 2" check valve and automatic float switch. Handles up to 2"
solids. Maximum pumping capacity of up to 5250 gallons per hour. Multi-vane,
non-clog, vertex impeller. 8' power cord. Corrosion resistant. Grommets
accept 4" PVC inlet, 2" PVC discharge and vent.
Economical sewage pump system manufactured of durable
thermoplastic construction. Ideal for basement installations, pumping
below-grade toliets, and laundry facilities. KEY FEATURES
Maximum pumping capacities up to 5250 GPH
Corrosion-resistant construction with multi-vane, non-clog vortex impeller
Grommets accept 4" PVC inlet, 2" PVC discharge and vent
Handles up to 2" solids
1 Year Warranty WARRANTY
1 year limited warranty
Intellipump(TM) Water Removal
Utility Pump, Auto On/Off, 1/4 HP, 1790 GPH
Patented, electronically controlled submersible pump. Automatically turns on
when water is present and turns off when water returns to 3/16". Perfect for
surfaces that collect water such as basements, rooftops, window wells or any
other shallow areas. Maximum pumping capacity of up to 1790 gallons per
hour. Corrosion-resistant, engineered resin construction. Easy, one-time
installation. Just plug and pump. Includes 15' power cord and garden hose
adapter. 1/4 HP
The Intellipump - Just Plug
this pump in and it automatically checks for traces of water whether you are
pumping basements or draining puddles.
KEY FEATURES
Patented, electronic controlled pump - Pump starts every 2-1/2 minutes to
check for water. Shuts off if water is not detected
Perfect for surfaces that collect water such as basements, rooftops, or any
shallow flooded area
Corrosion-resistant engineered resin construction
WARRANTY
2 year limited warranty
Specs:
TYPE: Submersible Utility
MAXIMUM CAPACITY: 1790 GPH
HORSEPOWER: 1/4
BATTERY EMERGENCY BACK-UP SUMP PUMP
SYSTEM 12V
"Emergency, fully automatic back-up sump pump system. Battery Sold
Separately. System capable of removing more than 10,000 gallons of water per
power outage. State-of-the-art computer controlled UL/CUL approved charger
provides maximum security. System will operate in event of primary pump
failure or power outage. BATTERY NOT INCLUDED. Black.
Emergency battery back-up sump pump system safeguards
against flooded basements, whenever your primary sump fails.
KEY FEATURES
Prevents expensive water damage
High-performance pump operates in an emergency to keep up with incoming
water
Patented charging technology charges battery in stages to maintain 90%
charge
Optional dual battery capability allows for longer back-up time
Dual check valves for connecting to existing sump pumps
WARRANTY
1 year limited warranty
Specs:
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: n/a
MAXIMUM CAPACITY: 2000 GPH
FLOW AT 10' LIFT: 1200 GPH
SWITCH TYPE: Vertical
SWITCH ON LEVEL: Depends upon user install
SWITCH OFF LEVEL: Depends upon user install
MINIMUM SUMP DIAMETER: 13-1/2"
MINIMUM SUMP DEPTH: 22"
DISCHARGE PIPE SIZE: 1-1/4"
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE: 1/8"
CORD LENGTH:
AMP DRAW:
VOLTAGE: 115v, 60 Hz to charger / 12v out to pump
RECOMMENDED BREAKER: a0 amps
LIQUID TEMP RANGE:
AGENCY LISTING: charger is UL and CUL listed
ACCESSORIES INCLUDED: none
SUBMERSIBLE THERMOPLASTIC SUMP PUMP
1/2 HP TETHERED SWITCH
Sump pump maintenance free and silent, resists corrosion and is provided
with an inlet protected by a strainer, internal filtage of 3.18 inches and
an outside filtage 3.8 centimetres for more convenience in case they should
be replaced. Maximum pumping capacity up to 13,740 liters per hour. For
drainage sump with a diameter of 35.6 cm, the range of submersible pumps the
most popular. Black.
These Sump Pumps provide
carefree performance and quiet operation. These Sump Pumps provide carefree
performance and quiet operation. Tethered on/off float switch allows for
maximum water discharge per cycle.
KEY FEATURES
Automatic corrosion-resistant submersible sump pump (automatic or manual
operation)
1-1/4" or 1-1/2" discharge pipe size
Tethered float switch can be used in 14" diameter or larger sump basin
WARRANTY
3 year limited warranty
SUBMERSIBLE WATER REMOVAL UTILITY
PUMP 1/4 HP 1600 GPH
Submersible Water Removal Utility Pump 1/4 HP, 1600 GPH. Multi-purpose pump
for a variety of household dewatering tasks including sump draining,
emptying ponds and aquariums. Key features: Multipurpose pump for emergency
basement and sump draining, emptying ponds, appliances, wash down and roof
dewatering. Draws water down to 3/16". Corrosion-resistant, continuous duty
submersible pump. Switch for automatic operation sold separately. 115 V.
Multi-purpose pump for a variety of household
dewatering tasks including sump draining, emptying ponds and aquariums.
KEY FEATURES
Multipurpose pump for emergency basement and sump draining, emptying ponds,
appliances, wash down and roof dewatering
Draws water down to 3/16"
Corrosion-resistant, continuous duty submersible pump
Switch for automatic operation sold separately
WARRANTY
1 year limited warranty
Specs:
Horsepower: 1/4
Max Gallons Per Hour: 1600
Max Lift Height: 22'
Body Construction: Thermoplastic
SUBMERSIBLE SUMP PUMP CAST IRON
1/3 HP Cast iron submersible sump pump. Efficient motor with thermal
overload protection. Rugged cast iron construction. Automatic float switch.
Easy installation - replace pedestal or submersible sump pumps. 1-1/2''
discharge, R3S includes 1-1/4'' adapter. Black. Water Ace brand
Sku 76364-18, Model R3S, $92.99 each
Accessories
PARTS 2o DISCHARGE HOSE KIT
Flexible 1-1/4" x 25' corrugated drain tubing, 1-1/2'' adapter. Easy to
install and use with sump pump, bilge pumps, centrifugal and submersible
pumps. Packaged in printed polybag. Flotec
Discharge Hose Kits
For use with pedestal and submersible sump pumps
Ready to install for permanent or emergency use
Hose clamp included
KEY FEATURES
Universal, Fits 1-1/4" or 1-1/2"
24' x 1-1/4" flexible drain tubing
1-1/4" and 1-1/2" high-impact NPT barbed adapters
Sku 74955-75, Model
FP0012-6U-P2, $8.29/kit
TETHERED FLOAT SWITCH
For submersible sump pump - piggyback.
Flotec
Parts2O (TM) Brand
KEY FEATURES
Piggyback Electrical Plug Allows Simple Electrical Connection
Works With Many Brands and Models of Submersible Sump Pump
Easy To Install
Sku
73822-78, Model FP18-15BD, $44.99 each
VERTICAL FLOAT
SWITCH
For submersible sump pump - piggyback. Flotec
Parts2O (TM) Brand
KEY FEATURES
Vertical Style for use in Sump Narrow or Shallow Sump Pits
Simple Piggyback Plug Makes Easy Electrical Connection
Includes Mounting Bracket
Sku
73823-77, Model FPS17-66, $52.99 each
SUMP PUMP CHECK
VALVE
Jackel's famous Model DJ-545, with two flexible couplings and four corrision
resistant clamps. For schedule 40 plastic, DWV, black or galvanized pipe.
Fits 1-1/4 or 1-1/2''. Made in U.S.A.
Sku 30558-11, Model 240-150, $20.99 each
SUMP PUMP CHECK VALVE
Designed for quick and easy inline use. Straight, flexible rubber sleeves on
both the inlet and outlet sides of the valve. Comes with 4 stainless steel
clamps. 2"
Sku 73906-44, Model PE-SPC200SB,
$25.99 each
22 GALLON SUMP PUMP BASIN
18" x 22" (45,7cm x 55,8cm) and 83,8 litres (22 gal.) basin. Rugged plastic
construction. Flotec
22 Gallon Sump Basin, 18" x 22" Basin Only - For
Lid, Use Model FPW73-20
Basin only - Sku 73825-00,
Model FPW73-19, $23.99 each
SUMP PUMP BASIN LID
Rugged plastic
construction. Flotec
Parts2O (TM) Brand
KEY FEATURES
Use with sump basin model FPW73-19 (22 gallon, 18" x 22")
Elongated slot opening in lid allows for multiple pipe configurations
Lid only - Sku 73824-50, Model FPW73-20, $9.79 each
SUMP PUMP LIQUID LEVEL ALARM
'Plumb-eeze' Switch-activated alarm to alert of a sewage back-up or high
water condition. Easy to install. Features: loud horn alarm, red warning
light with test switch, safe non-mercury float, 6 foot power cord, 30 foot
float switch.
Sku 30547-72, Model PE-HLA30,
$119.99 each
GENERATOR PANEL
Provides power distribution to key loads such as: lighting, regrigerator,
sump pump, computer, heating, freezer, air conditioning. Provides "THE
WORLD'S FINEST" QO circuit protection. 4-8 circuits. 1 phase/3W - 120/240V.
Uses genuine "QO" breakers. Manufactured by Schneider Canada
30 amps - Sku 90150-09, Model CQ04-8M30DSGP 30AMP.
$179.99 each
60 amps - Sku 90150-25, Model CQ04-8M60DSGP 60AMP, $194.99 each
SUBMERSIBLE PUMP INSTALLATION KIT
Includes: 150-ft, 12/3 wire with ground, brass tank tee, pressure switch,
gauge, torque arrestor, safety relief valve and wire splice kit.
Flotec
Parts2O (TM) Brand
KEY FEATURES
CONTENTS:
150' of wire (12-3 with ground)
11" Brass Tank Tee
Pressure Switch (30/50)
Pressure Gauge (1 - 100 psi)
Torque Arrestor
Wire Splice Kit
Pressure Relief Valve (preset to 75 psi)
Sku 73824-19,
Model FP87, $169.99 each
DRILL PUMP FOR WATER REMOVAL - 225
GPH
Thermoplastic construction. Works with electric drills. Ideal for pumping
water or emptying oil. Compact design. Perfect for emptying and overflowing
dishwasher or washing machine, an aquarium or blocked sinks. Maximum pumping
capacity of 225 gallons per hour with a max. drill speed of 1200 rpm. Can
also be used for easy oil changes on mowers, boats and cars. Flotec
Parts2O (TM) Brand
Thermoplastic drill pump works with electric drills. Ideal to pump water or
change oil with your electric drill as a power source.
KEY FEATURES
Multi-purpose pump
Maximum pumping capacities up to 225 GPH
Minimum drill speed 1200 RPM
WARRANTY
90 day warranty
Sku 73507-05, Model FPDM21SA,
$10.49 each
THERMOPLASTIC SPRINKLER PUMP 1.5 HP
Pumps for irrigation systems, self-priming and corrode resistant
thermoplastic are built solid fiberglass reinforced ultra-rugged. They can
feed up to 30 sprinkler heads. Their boot automatic can use with sprinkler
systems operate automatically, as well as dewatering and water transfer.
Throughput of up to a maximum depth of 6.1 meters of water, sturdy, ready to
be plugged into a 230 volt pump, fully serviceable, using a monomètre TC2104
is recommended. The priming is done automatically after her body was
initially filled with water, a check valve or foot valve is required.
Corrosion-resistant, self priming sprinkler pumps are
constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic.
Capable of operating up to 30 sprinkler heads.
KEY FEATURES
Superior performance at depths to water of 20' or less
Fiberglass-reinforced thermoplastic pump housing for the highest corrosion
resistance
Ready-to-install 230 volt motor (dual voltage)
Self-priming after pump housing is initially filled (Check Valve or Foot
Valve required)
WARRANTY
1 year limited warranty
Specs:
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1-1/2
MAXIMUM CAPACITY: 67 GPM
FLOW AT 10' LIFT and 30 PSI: 45 GPM
MAX LIFT: 25'
MAX PSI: 47 psi
SUCTION PIPE SIZE: 1-1/2"
MINIMUM SUCTION PIPE SIZE: 1-1/2"
DISCHARGE PIPE SIZE: 1-1/2"
MINIMUM DISCHARGE PIPE SIZE: 1-1/2"
AMP DRAW: 9.6 amps on 230v / 19.2 amps on 115v
VOLTAGE: 230v / 115v , 60 Hz
RECOMMENDED BREAKER: 15 amp for 230v / 25 amp for 115v
LIQUID TEMP RANGE: 32°F-140 °F (0°C-60 °C)
AGENCY LISTING:
ACCESSORIES INCLUDED: none
PUMP CONTROL BOX
Control box for 2-wire pumps. 230 volts. Flotec
1/2 HP - Sku 30595-16, Model FP217-810, $77.99 each
3/4 HP - Sku 73818-74, Model FP217-811, $77.99 each
SEWAGE BASIN
Polyethylene basin complete with lid and gasket kit. 4'' (10.16 cm) inlet,
3'' (7.62 cm) vent, 2'' (5.08 cm) discharge. 20'' x 30'' (50.8 cm x 76.2
cm). Wicor Canada
Sku 30596-15, Model 376582,
$124.99 each
VERTICAL TOP MOUNT SWITCH
For column sump pumps.
Works with Pedestal
Pumps that have top-mount switch. Simple installation.
Sku 73645-24, Model FP0018-7D, $18.99 each
FLOAT SWITCH FOR PEDESTAL PUMP
Float switch for pedestal pump side mount. Black
Sku 75391-90, Model FP0020, $18.49 each
30 GALLON SEWAGE BASIN PUMP SYSTEM
Accessories for pumps effluent and sewage basin for 113.6 liters. Only for
sewage. Black. 18" diameter. 30" deep. For seal kit, use Model PW198-3
Sewage Basin only - Sku 76256-84, Model FPW73-15P2,
$52.99 each
Sewage Basin lid kit - Sku 76256-76, Model FPW73-17P2, $72.99 each
We welcome all inquiries on our products. Please use
Feedback form to
contact us.
Please note that all prices in all categories are
listed in Canadian Dollars. All items are subject to 15% Harmonized Sales
Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when
shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST)
when shipped to British Columbia. All other
provinces/territories are subject to 5% Goods and Service Tax (GST). International and United States sales are
tax exempt (duty and brokerage fees, if applicable, are the responsibility of
the purchaser).
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).
Not all items can be shipped due to weight and size factors. Items marked
free shipping are for within Canada and the USA (with the exception of remote
locations)). We do not
ship chemical products or insecticides. All prices
subject to change without notice. Not all items may be available at all
times. We reserve the right to choose our customers and to limit
quantities if needed. Website is also subject to error. If a pricing
error is discovered it will be fixed, however we are not obliged to sell for the
error. Website pricing may differ from in-store pricing.
We accept VISA, Mastercard or American Express. You can also send a money order
or check, in which case we will wait for it to clear prior to shipping out the
goods. In some cases, Paypal will be used as a payment method.
