Direct Wire - 120V
Ionization technology
AC power light (green).
Rapid flashing red LED light indicates which unit in the multi-station
installation is the originating alarm.
Test button and HUSH button to silence alarm.
Single or multi-station capability (up to 24 units).
AC protection for every room.
ULC listed.
5 year warranty.
Smoke Alarm, PRO SERIES
Technical Specifications:
Electrical Rating: 120V AC (60Hz, 60 mA max per alarm)
Audio Alarm: 85 dB
Temperature Range: 4.4C (40F) to 37.8C (100F)
Humidity Range: Up to 85% relative humidity (RH)
Smoke Sensor: Ionization
Wiring: Quick connect plug with 20 cm (8") pigtails
Interconnects with up to 24 units, of which 18 can be initiating
This alarm interconnects with these Kidde models: 1235CA Series, 1275CA
Series, 1276CA Series, 1285CA Series, i1202CA, i12040CA, i12060CA,
KN-COB-ICB-CA, KN-COSM-IBCA, KN-COB-IC-CA, KN-COSM-ICA, KN-COP-IC-CA,
PE120CA, Pi2000CA, SM120X, HD135FCA, CO120X, SL177i
The Kidde 440375 is a battery operated, single station smoke alarm. This
unit provides a level of protection that you have come to expect in a Kidde
product. The Kidde 440375 is designed to alert you and your family to the
dangers of smoke and fire. This smoke alarm features an ionization sensor
that protects best against fast flaming and other types of fires. The 440375
is powered by a 9V battery and offers a Hush feature that temporarily
silences nuisance alarms.
Quiets Nuisance Alarms
Battery operated (1-9 V battery included). No wiring required
With "hush" button, to temporarily silence false alarms.
Red light flashes every 30-40 seconds to indicate that alarm is receiving
power.
Test button checks horn, battery & alarm circuitry.
Low battery indicator.
Special mounting bracket for fast installation.
Tamper resistant locking pin to deter theft.
RV suitable.
5 year warranty
A good choice for controlling nuisance alarms
Ionization technology - sensitive to fast flaming and other fires
Temperature range 4.4C (40F) to 37.8C (100F)
Humidity range - Up to 85% relative humidity (RH)
Technical specifications:
Power Source: 9V Battery (included)
Sensor: Ionization
Audio Alarm: 85dB at 10ft
Temperature Range: 40F (4.4C) to 100F (37.8C)
Humidity Range: 5%-95% relative humidity (RH)
Size: 5" in diameter x 1.5" depth
Weight: 1lb
Interconnects: No
LED: Red, normal operation
Warranty: 5 year limited
SMOKE ALARM SET (Two) - Smoke Alarms with Hush Button
The Kidde 440375 is a battery operated, single station smoke alarm. This
unit provides a level of protection that you have come to expect in a Kidde
product. The Kidde 440375 is designed to alert you and your family to the
dangers of smoke and fire. This smoke alarm features an ionization sensor
that protects best against fast flaming and other types of fires. The 440375
is powered by a 9V battery and offers a Hush feature that temporarily
silences nuisance alarms.
Battery operated ( 2 - 9 V batteries included). No wiring required.
Press 'Hush' button to temporarily silence false alarms quickly
Alarm resets automatically after about seven minutes.
In case of dense smoke, the Lifesaver alarm circultry overrides the 'Hush'
button to sound the alarm.
Red light flashes every 30-40 seconds to indicate that alarm is receiving
power.
Test button checks horn, battery and alarm circuitry. Verifies alarm
operation
Low battery indicator: Unit sounds a warning chirp if battery is low.
Special mounting bracket for fast installation.
Twist-off mounting makes battery replacement easy and safe.
Tamper resistant locking pin to deter theft.
5 year warranty
Ionization technology - Sensitive to fast flaming and other fires.
Technical specifications:
Power Source: 9V Battery (included)
Sensor: Ionization
Audio Alarm: 85dB at 10ft
Temperature Range: 40F (4.4C) to 100F (37.8C)
Humidity Range: 5%-95% relative humidity (RH)
Size: 5" in diameter x 1.5" depth
Weight: 1lb
Interconnects: No
LED: Red, normal operation
Warranty: 5 year limited
Sku 90431-83, Model 0916CAKT, $25.99 each
Buy Now!
The Kidde 440378 is a battery operated smoke alarm, equipped with a
photoelectric sensor, designed to alert you and your family to the dangers
of smoke and fire. The 440378 includes a 9V battery, providing you
protection even during a power failure. This unit is UL listed and offers a
10-year limited warranty. This alarm uses photoelectric sensing technology.
Photoelectric sensing alarms may detect visible particles (associated with
smoldering fires) sooner than ionization alarms. Ionization sensing alarms
may detect invisible fire particles (associated with flaming fires) sooner
than photoelectric alarms. Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to help insure maximum detection
of the various types of fire that can occur within the home. The Kidde
440378 photoelectric smoke alarm is battery operated protecting you and your
family even during power outages. This unit does not require any wiring and
can be installed in minutes. The 440378 is equipped with a test button that
allows you to test the alarm's electronic circuitry, horn and battery
function.
All purpose.
For use in all rooms.
9V battery included.
Low battery indicator.
Easy to install.
Photoelectric sensor.
Test button and HUSH button to silence alarm.
No wiring required.
10 year limited warranty.
Technical specifications:
Power Source: 9V Battery (included)
Audio Alarm: 85dB at 10ft
Temperature Range: 40F (4.4C) to 100F (37.8C)
Humidity Range: 5%-95% relative humidity (RH)
Sensor: Photoelectric
Size: 5" in diameter x 1.5" depth
Weight: 0.8lbs
Interconnects: No
LED: Red, normal operation
Warranty: 10 year limited
TALKING SMOKE AND CARBON MONOXIDE DETECTOR - DIRECT WIRE, 120V
Loud voice alarm indicator: voice alarm announces "Fire! Fire!" or "Warning!
carbon monoxide!" warnings.
Smoke fire and CO protection: combines two important types of safety alarms
in one unit.
Smart hush: newly developed hush feature.
Provides voice "Hush activated" and "Hush cancelled" indication.
Automatically deactivates when nuisance smoke clears.
Test/reset button: single button easily tests smoke and CO sensors
simultaneously.
Low battery indicator: unit announces "Low battery" and red LED flashes.
Intelligent interconnect: only unit to interconnect with other safety
devices and distinguishes between smoke and CO alarm signals.
120 V AC direct wire with 9 V battery backup
Ionization Technology
Technical Specifications:
Electrical Rating: 120V AC (60 Hz), 60mA max per alarm
Audio Alarm: 85 dB
Temperature Range: 4.4C (40F) to 37.8C (100F)
Humidity Range: Up to 85% relative humidity (RH)
Sensors: Ionization and electrochemical
Wiring: Quick-Connect plug with 20cm (8") pigtails
This alarm interconnects with these Kidde models: 1235CA Series, 1275CA
Series, 1276CA Series, 1285CA Series, i1202CA, i12040CA, i12060CA,
KN-COB-ICB-CA, KN-COSM-IBCA, KN-COB-IC-CA, KN-COSM-ICA, KN-COP-IC-CA,
PE120CA, Pi2000CA, SM120X, HD135FCA, CO120X, SL177i
Interconnects with up to 24 units, of which 18 can be initiating.
Sku 90442-49, Model 900-0119, $62.99 each
Buy Now!
NIGHTHAWK DUAL SENSOR SMOKE AND FIRE ALARM
Battery operated (1 - 9 V battery included). No wiring required
For maximum protection this alarm has both ionization and photoelectric type
sensors. Sensitive to slow smouldering and fast flaming fires
Photoelectric technology: better at detecting slow, smouldering fires.
Ionization technology: better at detecting fast flaming fires.
Test button: tests circuitry and verifies alarm operation.
Hush button: quickly silences nuisance alarms.
Easy installation.
10-year warranty.
White.
Ultimate protection smoke alarm
Temperature range 4.4C (40F) to 37.8C (100F)
Humidity Range: Up to 85% relative humidity (RH)
Sku 90425-99, Model PL90000CA, $32.99 each
SEALED
BATTERY SMOKE ALARM WITH SMART HUSH (TAMPER RESISTANT SMOKE ALARM - Never Replace Battery)
The Kidde 0910 is a 10-year, sealed battery, ionization, smoke alarm with
Alarm Memory and Smart Hush feature. The innovative design of this alarm's
automatic activation is unlike any other smoke alarm. The 0910 alarm will
automatically activate when it is attached to the mounting bracket; there
are no pull-tabs, no switches, everything is automatic. At the end of the
alarm life, the unit will chirp, indicating the alarm is in need of
replacement. The customer can use a simple tool such as a screwdriver to
deactivate the unit, stopping the low battery chirp and making it safe for
disposal. The sealed-in board-mounted batteries will power the 0910 unit for
its complete 10-year life. No replacement batteries will ever be needed.
This alarm uses ionization sensing technology.
Ionization sensing alarms may detect invisible fire particles (associated
with flaming fires) sooner than photoelectric alarms. Photoelectric sensing
alarms may detect visible particles (associated with smoldering fires)
sooner than ionization alarms. Kidde strongly recommends that both
ionization and photoelectric smoke alarms be installed to help insure
maximum detection of the various types of fire that can occur within the
home. The Kidde 0910 sealed battery operated smoke alarm features a
self-activation mechanism making installation simple and easy. It also
features Smart Hush Control allowing consumers to temporarily silence
nuisance alarms and an End of Life alert indicating it is time to replace
the alarm. At the end of the alarm's 10-year life, deactivation of the alarm
is just as easy. Using a tool such as a small screwdriver, a deactivation
switch removes power from the alarm and renders the batteries safe for
disposal. The alarm lockout feature mechanically prevents a deactivated unit
from being mounted back on the mounting bracket.
Ionization technology, better at detecting fast flaming fires.
Battery powered 10 year, sealed lithium batteries.
No need to buy and replace batteries, simply replace unit.
Test button, tests circuitry and verifies alarm operation.
Hush button, quickly silences nuisance alarms.
Tamper resistant, locks to inhibit tampering with the alarm, preventing the
removal of batteries for continuous protection.
Low battery indicator, warning chirp sounds when battery needs replacement.
Special mounting bracket included, allows for fast installation.
Dimensions: 6" x 6" x 1,5".
White.
10 year warranty
Technical specifications:
Power Source: Three, 3V lithium batteries
Sensor: Ionization
Audio Alarm: 85dB at 10ft
Temperature Range: 40F (4.4C) to 100F (37.8C)
Humidity Range: 5%-95% relative humidity (RH)
Size: 5.6" in diameter x 1.55" depth
Weight: 1.5lbs
Interconnects: No
LED: Four modes of operation
Warranty: 10 year limited
The
Kidde 440376 is a battery operated, ionization smoke alarm with a safety
light that helps guide your way to safety. This unit is designed to alert
you and your family to the dangers of smoke and fire. The 440376 includes a
9V battery that powers the smoke alarm, along with an additional 9V battery
to power the safety light. This easy to install smoke alarm is UL listed and
offers a 5-year limited warranty.
The premium choice for controlling nuisance alarms and lighting exit routes
Illuminates exit route
Test button and flashing LED, allows simple verification of battery and
alarm operation.
Hush button, quickly silences nuisance alarms and automatically resets after
7 minutes.
Safety light can illuminate a hallway for improved navigation in the dark.
Illuminates an exit route to safety
Low battery indicator, warning chirp sounds when battery needs replacement.
Special mounting bracket included, allows for fast installation.
Ionization Technology - Sensitive to fast flaming and other fires
Battery Operated - 9V batteries included. Easy to Install, no wiring
necessary.
Dimensions: 6" x 6" x 1,5".
White.
10 year warranty
Single station smoke alarm
Temperature range - 4.4C (40F) to 37.8C (100F)
Humidity Range - Up to 85% relative humidity
Technical specifications:
Power Source: Two 9V batteries (included)
Sensor: Ionization
Audio Alarm: 85dB at 10ft
Temperature Range: 40F (4.4C) to 100F (37.8C)
Humidity Range: 5%-95% relative humidity (RH)
Size: 5" in diameter x 1.5" depth
Weight: 1lb
Interconnects: No
LED: Red, normal operation
Warranty: 5 year limited
Ionization technology, better at detecting fast flaming fires.
120 V direct wire.
Interconnects with up to 24 units, of which 18 can be initiating.
9 V battery backup (included), continuous protection in case of power
failure.
Test button: tests circuitry and verifies alarm operation.
Hush Button, quickly silences nuisance alarms.
Front loading battery door, change the battery without removing the alarm.
Tamper resistant, locks to inhibit tampering with the alarm, preventing the
removal of batteries for continuous protection.
Low battery indicator, warning chirp sounds when battery needs replacement.
Dimensions: 6" x 6" x 1,7".
White.
Technical Specifications
Electrical Rating - 120V AC (60 Hz, 60 mA max per alarm)
Audio Alarm - 85 dB
Temperature Range - 4.4C (40F) to 37.8C (100F)
Humidity Range - Up to 85% relative humidity (RH)
Smoke sensor - Ionization
Wiring - Quick-connect plug with 20cm (8") pigtails
This alarm interconnects with the following Kidde models: 1235CA Series,
1275CA Series, 1276CA Series, 1285CA Series, i12020CA, i12040CA, i2060CA,
PE120CA, Pi20000CA, KN-COB-ICB-CA, KN-COSM-IBCA, KN-COB-IC-CA, KN-COSM-ICA,
KN-COP-IC-CA, SM120X, HD135FCA, CO120X, SL177i
BATTERY POWERED
SMOKE ALARM WITH FRONT LOAD BATTERY DOOR
The Kidde 0976 Smoke Alarm is an ionization, battery operated unit that
provides users with an easy to operate front load battery door, making
replacing the battery simple and convenient. The front load battery door
allows users to change batteries without having to remove the smoke alarm
from the mounting bracket. Its unique battery compartment design will
not close if the battery is installed incorrectly, leaving you assured the
batteries are properly installed. A locking feature, located on the back of
the alarm allows the battery door to lock if there is a concern of theft or
tampering. Along with its other premium features such as Hush, that silences
nuisance alarms, this product was designed to help warn families from the
dangers of smoke and fire hazards while providing its users with easy to use
features to keep a maintained smoke alarm with working battery.
This alarm uses ionization sensing technology.
Ionization sensing alarms may detect invisible fire particles (associated
with flaming fires) sooner than photoelectric alarms. Photoelectric sensing
alarms may detect visible particles (associated with smoldering fires)
sooner than ionization alarms. Kidde strongly recommends that both
ionization and photoelectric smoke alarms be installed to help insure
maximum detection of the various types of fire that can occur within the
home.
Ionization technology-better at detecting fast flaming fires.
Battery powered-9V battery included.
Easy installation.
Accessible without removing cover plate.
Test button-tests circuitry and verifies alarm operation.
Hush button-quickly silences nuisance alarms.
Front loading battery door-change the battery without removing the alarm.
Tamper resistant-locks the battery door compartment, preventing the removal
of batteries for continuous protection.
Low battery indicator-warning chirp sounds when battery needs replacements.
5-year warranty.
Technical specifications:
Power Source: 9V battery
Sensor: Ionization
Audio Alarm: 85dB at 10ft
Temperature Range: 40F (4.4C) to 100F (37.8C)
Humidity Range: 5%-95% relative humidity (RH)
Size: 5" in diameter x 1.79" depth
Weight: 0.51lbs
LED: Red, normal operation
Warranty: 10 year limited
"KIDDE" SMOKE ALARM
Photoelectric and ionization technology. 120V AC direct-wire. Test and
"Hush" button, 9V battery backup included, low battery indicator, special
mounting bracket included. 5 year warranty. White
Sku 74764-84,
Model PT2000CA, $36.99 each
WIRELESS INTERCONNECTED SMOKE ALARM
Battery operated - No wiring required for easy installation
"Hush" button - Quickly silences nuisance alarms from any unit
By linking together when one alarm sounds, all of the others will sound off
as well.
White
Interconnected - so when one alarm sounds, ALL your alarms sound. This alarm
can only communicate with other smoke alarms that are part of the Kidde
Wireless Alarm System. Interconnects with up to 12 wireless smoke alarms.
Earliest Warning - so you and your family have more time to escape
10 year warranty
Smoke alarm for the Kidde Wireless Alarm System
Test button - Tests circuitry and verifies alarm operation
Ionization technology - Sensitive to fast flaming and other fires
Sku 74765-18, Model 900-0201, $47.99 each
Buy Now!
BATTERY OPERATED COMPACT
SMOKE ALARM
The Kidde 0946 smoke alarm is a battery operated smoke alarm that utilizes
ionization sensing technology. The four (4) inch unit is smaller in diameter
giving it discreet design with the same quality you would expect in a Kidde
manufactured product. The 0946 is powered by a 9V battery, providing
continuous protection, even during power outages. This easy to install unit
includes a test button to verify the detection electronics are working as
intended.
Ionization smoke alarm with "Hush" silencing function.
Operates on one 9V battery.
5 year limited warranty.
4 x 10.3 x 10.3 (cm)
Technical specifications:
Power Source: 9V battery (included)
Sensor: Ionization
Audio Alarm: 85dB at 10ft
Temperature Range: 40F (4.4C) to 100F (37.8C)
Humidity Range: 5%-95% relative humidity (RH)
Size: 4" in diameter x 1.45" depth
Weight: 1lbs
Interconnects: No
Warranty: 5 year limited
The Kidde SL177i, used in conjunction with a smoke, heat or carbon monoxide
alarm, provides a bright visual signal to warn of a smoke, heat or CO
hazard. The Kidde Strobe light benefits the hearing impaired, allowing a
visual alert of a danger. This unit also includes a tamper resist pin that
helps to deter thief and tampering.
The Kidde SL177i is a 120VAC wire in unit that provides a visual warning
when part of an interconnected system.
Strobe Light
Remote Visual Signaling Device
120V AC Wire-In - Dual Mode
Quick-Connect 120 Volt AC Wire Harness included
For the Hearing Impaired
Bright 177 Candela Strobe Light - provides a visual warning when part of a
Kidde interconnected alarm system* - *Warning! This visual signaling device
has no detection means and must be interconnected with operating alarms.
Disconnecting or loss of AC power will render this signaling device
inoperative
Inter-connectable - Works with interconnectable Kidde, Fyrnetics, Lifesaver,
and Nighthawk AC wire-in alarms
5 Year Ltd Warranty
Interconnectable System
The Maximum protection only an InterConnectable System can offer: Every
floor. Every living space. Any place where a crisis could begin needs the
added security of an interconnectable warning system. Any unit that senses a
problem automatically triggers all units throughout the home immediately,
allowing extra time for escape.
Installation is simple: Unlike competitive products, the interconnectable
system requires no relay switches. No complex wiring. Just direct connect
and you're done.
Interconnects with all KIDDE, FYRENTICS, LIFESAVER and NIGHTHAWK smoke,
carbon monoxide and heat alarms, strobe lights and smoke and carbon monoxide
relay modules with interconnect capability. See enclosed users guide for a
listing by model number.
Strobe Light Features:
Provides a visual alarm to the hearing impaired. Strobe light is activated
when any Kidde, Fyrnetics, Lifesaver or Nighthawk interconnected smoke, heat
or carbon monoxide alarm is triggered.
Bright 177 Candela Strobe Light
Light level proven effective in waking the hearing impaired
1Hz Flash Rate
60 flashes per minute meets UL & NEMA standards
Smart Interconnect
Connects with up to 24 Kidde, Fyrnetics, Nighthawk or Lifesaver 3 wire
devices. Differentiates smoke and CO alarm signals with appropriate warning
Green LED indicator
Light verifies that alarm is receiving AC Power
Quick Connect
Installs and disconnects quickly with snap-on harness
Separate Trim Ring
fits all standard electrical box configurations
Tamper Resistant Locking Feature
To deter strobe light theft or removal
Must be Interconnected with Kidde, Fyrenetics or Lifesaver Alarms
Complies with the following standards:
Underwriters Laboratories (UL 1971)
Americans with Disabilities Act (ADA)
National Fire Protection Association (NFPA 72)
ANSI 117.1
Warning: Strobe light is extremely bright. Do not look directly at the light
or touch the lens when the light is flashing.
Technical Specifications:
Power Source: 120 VAC, 60 HZ
Electrical Rating: 100-130 VAC, 60HZ, 80mA standby 43 mA in rush, 2.2A peak,
580mA when operating
Flash Rate: 1 flash/sec
Light Output: 177 candela minimum
Temp Range: 32F (0C) to 120F (49C)
Wiring: Quick Connect plug with 8" pigtails
Warranty: 5 Year
Size: 5.6" in diameter, x 3" in depth
Weight: 1 lb
Interconnects: Up to 24 Kidde devices of which 18 can be initiating devices
Recommended Placement for the Hearing Impaired (MUST BE INTERCONNECTED WITH
KIDDE, FYRNETICS OR LIFESAVER ALARMS)
Locate the first strobe in the bedroom where a person who is hearing
impaired sleeps. The unit must be interconnected to smoke alarms near the
bedroom. If there are no alarms near the bedroom, then an interconnected
smoke alarm must be installed in the bedroom.
Locate additional strobe lights in any rooms where a hearing impaired person
might be present and need to be notified of an alarm condition (i.e. living
room, kitchen, bathroom, basement)
Note: Light intensity gradually decreases as the viewing angle is increased.
Consult chart in owner's manual to determine best location for strobe light
installation
FYRNETICS HEAT DETECTOR - Supplementary Life Safety Device
The Kidde HD135F is a 120VAC Wire-In Heat Alarm that responds to temperature
rather than smoke. The alarm will sound if temperatures rise above 135F. The
Kidde HD135F is interconnectable.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an
early warning to dangerous temperatures of 135F or more.
120 Volt Single or Multiple station with 9 volt battery backup
Interconnect (24) with quick connector
Ceiling White
135F Fixed Temperature
Limited 5 year warranty
Wire in with battery backup
Single or multiple station
Interconnect (24) with battery backup
Warning! NOT A LIFE SAFETY DEVICE. Smoke Detectors are recommended where
life safety is a factor. Heat Detectors will not protect against fire and
smoke and should only be used in conjunction with operating smoke detectors
NEW Standardized Audible Signal
Complies with the following authorities: Underwriters Laboratories (UL 539),
National Fire Protection Association (NFPA 72.2), California State Fire
Marshal (CSFM 72.54)
Full interconnect compatibility with:
Fyrnetics Smoke Alarm Models: 1235E and 1275E
Lifesaver Smoke Alarm Models: 1235, 1275, and 1285
Lifesaver Carbon Monoxide Tetector Model FYCO-3
Suitable for ceiling or wall mounting
Battery backup: continues protection in case of AC power failure
AC Power Light (green) - When on indicates 120 Volt AC power is being
delivered to the Heat Detector
Test Button - Tests heat detector circuitry and horn
Alarm Light (red) - Rapid flashing LED indicates which unit in the
multi-station installation is the originating alarm
Single or Multiple Station Capability - To use as a single station or
multi-connect up to 24 units (when one alarm sounds, all interconnect alarms
sound)
DC Battery Backup - 9V battery included
Low Battery Indicator - In the event of a "low" or "absence of" the alarm
battery, the heat detector will sound a warning "chirp"
Loud, piercing pulsating horn - To alert you quickly (85 decibels)
Separate Trim Ring - Fits all standard electrical box configurations
Tamper Resist Locking Pin - to deter theft
Quick-Disconnect - 120 Volt AC Connector
Warning! Removal of the heat detector battery and disconnecting or loss of
AC power will render this heat detector inoperative
Heat alarms are for situations where smoke detection may not be the best
solution.
Technical Specifications:
Power Source: 120VAC, 60HZ, 9V battery backup
Sensor: Heat
Audio Alarm: 85dB at 10ft
Temperature Range: -20F to +100F (-29C to +38C)
Humidity range: 5%-95% relative humidity (RH)
Size: 5" in diameter x 2" depth
Weight: 0.75lbs
Interconnects: Up to 24 Kidde devices of which 18 can be initiating devices
LED: Green, AC Power present, alarm mode; flashing Red indicates originating
alarm
Warranty: 5 year limited warranty
RELAY / POWER SUPPLY MODULE for Kidde Smoke/CO/Heat
Detectors/Alarms
Tech Specifications:
Electrical Rating - 120V AC 60 HZ 0.08 amp
Contact Rating - 10 amps @ 120 VAC, non inductive, 5 amps @ 30 VDC
DC Output - 5 MA Max (current limited)
Description: This module is only activated by a smoke alarm interconnect
signal. The relay portion of this module can be used to activate auxiliary
warning devices such as external bells and sirens, hallway or stairwell
lighting. It provides isolated, (no internal connection to 120 Volts AC)
normally open, and normally closed contacts.
The power supply portion can be used to connect spot type heat detectors
(Rate of rise or combined rate of rise and fixed temperature only) and
manual pull stations with interconnected multiple station alarms.
The model SM120X module is for use with the following interconnectable
models:
Smoke Alarms: 1235, 1235CA, 1275, 1275CA, 1276, 1276CA, 1285, 1285CA, 1296,
i12020, i12020CA, i12050, i1240CA, i12060, i12060CA, i12080, PE120, PE120CA,
P12000, and PI2000CA, RF-SM-ACDC
CO/Smoke Combo Alarms: KN-COSM-IB, KN-COSM-IBCA
Heat Alarms: HD125F, HD125FCA
all with red interconnect wires.
The module should be installed in a UL listed junction box. All connections
should be made by a qualified electrician in accordance with the
requirements of the national electrical code and/or any other local codes
having jurisdiction in your area.
EMERGENCY ESCAPE LADDER 2
stories. Extremely easy to deploy. Attaches quickly to window over 16" wide
and less than 11" deep (from interior to exterior wall). Tangle-free design.
Extremely strong but lightweight. Fully assembled, compact storage. 13 feet
long. Holding weight: 454kg / 900lbs.
We welcome all inquiries on our products. Please use
Feedback form to
contact us.
Please note that all prices in all categories are
listed in Canadian Dollars. All items are subject to 15% Harmonized Sales
Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when
shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST)
when shipped to British Columbia. All other
provinces/territories are subject to 5% Goods and Service Tax (GST). International and United States sales are
tax exempt (duty and brokerage fees, if applicable, are the responsability of
the purchaser).
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).
Not all items can be shipped due to weight and size factors. We do not
ship chemical products or insecticides. All prices
subject to change without notice. Not all items may be available at all
times. We reserve the right to choose our customers and to limit
quantities if needed. Website is also subject to error. If a pricing
error is discovered it will be fixed, however we are not obliged to sell for the
error. Website pricing may differ from in-store pricing.
We accept VISA, Mastercard or American Express. You can also send a money order
or check, in which case we will wait for it to clear prior to shipping out the
goods. In some cases, Paypal will be used as a payment method.
;)