"ECO-45" PELLET STOVE Max.
output of 45000 BTUs and minimum heat output of 8000 BTUs. Hopper capacity
of 70lbs. Maximum combustion time up to 72 hours. 6 heat settings.
Electronic ignition. Thermostatic or manual mode. Noise level adjustment.
Automatic or manual adjustment of combustion air supply. Incorporates latest
"Combex" technology. Approved on 3" or 4" vents. Full size ash drawer. Safe,
removable handle. Remotely programmable PC board. Outer dimensions: 25.5"W
x 28"D x 33"H. Approx. Weight: 230lbs (105kg). Metallic black finish.
The ECO-45 is a high efficiency pellet stove. This
model is EPA certified and is approved for installation in mobile homes. Its
low clearances to combustible materials make it a safe bet in the Medium
pellet stoves category.
FEATURES :
Model # : DP00045
Electronic igniter
Thermostatic or manual mode
Automatic or manual adjustment of combustion air supply
Safe and removable handle
High-efficiency stove EPA approved
Recommended Surface (sq. ft.) : 500 - 2,000
Model : Pedestal
Color : Metallic black
Easy-to-access ash drawer
Glass air-wash system
Mobile Home Approved
Optimal efficiency : 78 %
Emissions (grams / hour) : 1.8 g/h
Burn Rate : 1.3 - 5.5 lb/h
Tested or/and listed as per applicable standards by : Warnock
ECO 65 HIGH PERFORMANCE PELLET
HEATER
Model Number: DP00055. High performance pellet stove. EPA approved. Maximum
heat output of 65,000 BTU/hr. Minimum heat output of 14,800 BTU/hr. Hopper
capacity of 130 lbs. Bottom-feed technology. Maximum combustion time up to
72 hours. 6 heat settings. Electronic ignition. 465 CFM blower. Thermostatic
or manual mode. Approved on 4" vent. Full size ash drawer. Efficiency : 77%.
Tested by OMNI as per applicable standards (CSA/UL/ULC and/or others).
Black. For the Hot Air plenum kit 4" x 10" please refer to item 764-4479
Sku 76134-17, Model DP00055, $2,724.99 each
Ventilation Kits
4" BASE VENTING KIT Pellet
pipe vent kit includes 3" - 4" increaser, pipe connector, wall thimble, 2
tees with cap, 2 wall bands, 4 x 12" lengths, 2 x 12" lengths, 2 x 90
elbows, one 45 elbow, and one termination collar with screen.
Sku 74934-22, Model AC02011, $484.99/set
PELLET PIPE VENT KIT 1/2" air
space. 300 series stainless steel inner liner and galvalume outer casing.
Twist-lock coupler for easy assembly/disassembly. 3" clearance to
combustibles. Ceramic fibre gasket at female end, factory installed to
contain fly ash. It is recommended to use silicone between couplers. Kit
includes: 1 stovepipe adapter, 5 - 12"L pipes, wall thimble, 'T' with
clean-out, 2 wall bands, 1 - 90º elbow, 1 - 45º elbow and 1 vent
termination.
Sku 74761-38, 3", 3PL-PPK, $374.99/set Buy Now!
PELLET STOVE CHIMNEY CAP Vent
termination for vertical (through-the-roof) installations. Designed to
prevent rain & snow from entering the pipe. Must be a minimum 12" above roof
line. 4" diameter. Stainless steel.
Sku 74419-26, 4" Model PL4RC, $49.99 each
Buy Now!
FIXED LENGTH PELLET PIPE 4"
diameter. 1/2" air space. Galvanume outer casing and 300-series stainless
steel inner liner. Twist-lock coupler for easy assembly/disassembly. Ceramic
fibre gasket at female end, factory installed to contain fly ash. The use of
high-temperature silicone is recommended in between joints.
Sku 74418-50, 36" Model PL4P36, $77.99 each
Buy Now!
FIRESTOP SPACER Used to
protect combustible materials where the pipe passes through a ceiling or
wall. Use with pellet stoves.
Sku 74418-92, Model PL4FS, $23.99 each
CEILING SUPPORT Used to
support pellet pipe from the ceiling joist. Supports up to 50-ft of pipe.
Centres pipe between floors. Maintains 3" air-space clearance. Round design.
Galvanized with decorative, hi-temp black paint finish.
Sku 74419-00, Model PL4BCS, $82.99 each
ADJUSTABLE ROOF FLASHING Adjusts
for 0/12 - 6/12 roof pitches. 4-inch diameter. Galvanized steel. Use to
waterproof installations that penetrate the roof line. For use with pellet
stoves.
Sku 74419-18, Model PL4ARF, $23.99 each
PELLET PIPE Adjusts
from 4" to 8", eliminating the need to cut the pipe. 1/2" air space.
Galvanume outer casing and 300-series stainless steel inner liner.
Twist-lock coupler for easy assembly/disassembly. Ceramic fibre gasket at
female end, factory installed to contain fly ash. The use of
high-temperature silicone is recommended in between joints.
Sku 74419-34, Model PL4ADJ, $42.99 each
GALVANIZED 90º ELBOW Use with
pellet stove only. Galvanume outer casing and 300-series stainless steel
inner line. Twist-lock coupler for easy assembly. Ceramic fibre gasket at
female end. Requires the use of high temperature silicone between each
joint.
Sku 74419-42, Model PL490, $84.99 each
HOT AIR PLENUM KIT 4" X
10"
Hot air plenum kit for the ECO-65 (item #76134-17) pellet heater. Adapter
that allows to transform the Eco-65 stove into a hot air mini-furnace.
Brings the heat directly to the desired rooms by using the Eco 65 powerful
blower. Includes the plenum adapter, the grill cover plate, the fixation
support, the 5-inch rings, screws and nuts.
Sku 76444-79, Model AC01330, $104.99/kit
Accessories for your pellet stove
PELLET STOVE ROD Flexible.
48"
Sku 74741-41, Model BR0238, $13.99 each
Buy Now!
PELLET STOVE BRUSH Round
brush for pellet stove.
3" -
Sku 74741-82, Model BR0217, $18.49 each
Buy Now!
4" - Sku 74741-74, Model BR0218,
$20.99 each
Buy Now!
GEL FIRE STARTER Squeezes
out like toothpaste. For woodburning fireplaces and stoves, charcoal
barbecues, pellet stoves and campfires. Lights instantly, smokeless,
odourless, no smell or after feel on hands. Paper or kindling requirement
eliminated or reduced. Stays put and burns long enough to ignite stubborn
fuels.
473 ml - Sku 31118-87, Model KK0082-A, $8.29 each
946 ml -
Sku 31118-95, Model KK0083-A, $9.49 each
Sorry - we will not ship this item. In store pick-up only.
"CLEAR FLAME" GLASS CLEANER Glass
door cleaner. Ideal for woodstoves, fireplace inserts and pellet stoves.
Tough on soot & smoke
Sku 73833-59, 22oz (650ml), Model KK0290, $9.79 each
DIGITAL WALL THERMOSTAT
Fits on pellet stove models ECO-65,
ECO-45, and ECO-35.
Also fits most other brands of gas and
pellet appliances having a thermostatic feature.
Can also use 24V current. (Includes 30
feet of millivolt wire).
Fits on most thermostatically
controlled pellet appliances, gas appliances, and furnaces
Fast and easy installation
Helps reduce heating costs through a
better control of room temperature
For gas and pellet stoves
Braeburn 1000NC Builder Series
Non-Programmable Single Stage Heat/Cool Digital Thermostat
Bright display backlight
Easy access front battery door
Battery powered with latching relay
output
O/B Terminal
Compressor Short Cycle Protection
Adjustable temperature differential
ESD Guard Electronic Circuitry
Compatible with single stage gas, oil
or electric systems (including single stage heat pumps and millivolt heat
only systems)
Limited 2 year warranty
Specs
Electrical Rating - 24 Volt AC (18-30
VAC). 1 amp max. load per terminal, 2 amp total max load (all terminals)
Control Range - 45-90 degree F (7-32
degree C)
Accuracy: +/- 1 F (+/- 5C)
DC Power - 3.0 volt DC (2 AA Alkaline
batteries included)
We welcome all inquiries on our products. Please use
Feedback form to
contact us.
Please note that all prices in all categories are
listed in Canadian Dollars. All items are subject to 15% Harmonized Sales
Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when
shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST)
when shipped to British Columbia. All other
provinces/territories are subject to 5% Goods and Service Tax (GST). International and United States sales are
tax exempt (duty and brokerage fees, if applicable, are the responsibility of
the purchaser).
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).
Not all items can be shipped due to weight and size factors. Items marked
free shipping are for within Canada and the USA (with the exception of remote
locations)). We do not
ship chemical products or insecticides. All prices
subject to change without notice. Not all items may be available at all
times. We reserve the right to choose our customers and to limit
quantities if needed. Website is also subject to error. If a pricing
error is discovered it will be fixed, however we are not obliged to sell for the
error. Website pricing may differ from in-store pricing.
We accept VISA, Mastercard or American Express. You can also send a money order
or check, in which case we will wait for it to clear prior to shipping out the
goods. In some cases, Paypal will be used as a payment method.
.JPG)
.JPG)