Home English/French Feedback Privacy Policy Air Miles Rentals Search

Up
Air Miles. Travel and More.



submit to reddit

NHRA Retail Innovators of the Year
 

 

 


Click here to view our sanding accessories.

King Industrial

6" x 48" Belt and 12" Disc Sander

On sale for $849
Buy Now!

bulletPowerful 1.5 HP belt drive motor
bulletHeavy- duty cast-iron tables and body
bulletSteel plate covered with graphite to reduce friction for longer belt life
bulletAdjustable belt unit operates vertically, horizontally, or at any set angle in between
bullet2 - 4” dust chutes
bulletSturdy cabinet stand
bulletQuick belt release mechanism
bulletComes complete with miter gauge

Available as:

Model KC-788FX
Belt 6" x 48"
Belt Lift 45't - 45's
Belt Speed 1,570 SFPM
Disc 12"
Disc Speed 2,000 RPM
Motor 13.4 amp @110v, 6.7 amp @220v
Voltage 110V/220V, 1 Phase, 60 Hz
Pre wired at 110V
Dimensions (LXWXH) 30" x 23" x 55"
Weight 215 lbs
Click here for the service manual & parts list for Model KC-788FX 6" x 48" Belt and 12" Disc Sander

Click here for the instruction manual for Model KC-788FX 6" x 48"Belt and 12" Disc Sander

King Industrial

Oscillating Spindle Sander

Click here to enlarge

On sale for $999
Buy Now!

bulletDesigned for intricate sanding operations
bulletHeavy-duty cast-iron table is precision ground
bulletRubber drum can be fitted on both ends for full use of the entire spindle
bullet4” Dust chute
bulletComes standard with set of 10 removable spindles, in sizes 1/4” x 5”, 3/8” x 6”, 1/2” x 6”, 5/8” x 6”, 3/4” x 9”, 1” x 9”, 1 1/2” x 9”, 2” x 9”, 3”x 9” and 4” x 9” included
bulletTable tilts 45° down, and 20° up
 

Available as:

Model KC-OVS-F2
Oscillations per minute 72
Oscillations stroke 1-1/2"
Spindle Drum Length 10 (5" to 9")
Spindle Drum Diameter 1/4" to 4"
Spindle Speed 1,720 RPM
Table Size 25" x 25"
Motor 11 amp @110v, 5.5 amp @220v
Voltage 110V/220V, 1 Phase, 60 Hz
Pre wired at 110V
Dimensions (LXWXH) 25" x 25" x 35-3/4"
Weight 385 lbs
Click here for the service manual & parts list for Model KC-OVS-F2 Oscillating Spindle Sander

 King Industrial

6" x 80" Edge Sander

Click here to enlarge

bulletHeavy duty cast-iron tilting tables
bulletFront table can be adjusted up or down to suit the job,and can also be tilted up to 60°
bulletEnd table allows curved sanding operations
bullet4” Dust chute
bulletQuick belt release lever

Available as:

Model KC-ES
Belt 6" x 80"
Table Size (Front) 10" x 22"
Table Size (side) 4" x 8"
Belt Speed 1,800 SFPM
Motor 10 amp @110v, 5 amp @220v
Voltage 110V/220V, 1 Phase, 60 Hz
Pre wired at 110V
Dimensions (LXWXH) 32" x 26" x 50"
Weight 265 lbs
Click here for the service manual & parts list for Model KC-ES 6" x 80" Edge Sander

King Industrial

6" x 108" Edge Sander

Click here to enlarge

On sale for $1799
Buy Now!

bulletPowerful 2 HP motor
bulletBalanced 7” rubber drive wheel and 3” crown idler wheel provide uniform belt tracking
bulletFully tilting front table
bulletTables can be adjusted up and down to suit the job
bulletHinged dust hood accommodates oversized stock
bulletGraphite backing diminishes belt friction for increased belt life
bulletSingle knob tracking control
bulletEnd table allows curved sanding operations
bullet4" Dust chute for dust collector hook-up
bulletMagnetic safety switch

Available as:

Model CT-108C
Belt 6" x 108"
Table Size (Front) 37" x 7-3/4"
Table Size (side) 19" x 12"
Belt Speed 3,150 SFPM
Motor 12 amp @ 220V
Voltage 220V, 1 Phase, 60 Hz
Dimensions (LXWXH) 63-1/4" x 23" x 41"
Weight 500 lbs
Click here for the service manual & parts list for Model CT-108 6" x 108" Edge Sander

Click here for the instruction manual for Model CT-108 6" x 108" Edge Sander

 King Industrial

6" x 89" Oscillating Edge Sander

Click here to enlarge

On sale for $849
Buy Now!

bulletNew and improved oscillating drive
bulletHeavy-duty enclosed cabinet stand has built-in door for storage
bulletFront table can be adjusted up or down to suit the job
bulletGraphite backing diminishes belt friction for increased belt life
bulletQuick belt release lever
bullet4" Dust chute for dust collector hook-up
bulletComes with miter gauge, table guide and end table

Available as:

Model KC-689-OSC-7
Belt 6" x 89"
Table Size (Front) 9-7/8" x 29-5/8"
Table Size (side) 9-7/8" x 11-7/8"
Belt Speed 3,150 SFPM
Oscillation Stroke 1/2"
Oscillations per minute 110
Motor 18 amp @ 110V, 9 amp @ 220V
Voltage 110V/220V, 1 Phase, 60 Hz
Pre Wired At 110 V
Dimensions (LXWXH) 53" x 26" x 47"
Weight 236 lbs
Click here for the service manual & parts list for Model KC-689-OSC 6" x 89" Oscillating Edge Sander

Click here for the instruction manual for Model KC-689-OSC-7 6" x 89" Oscillating Edge Sander

 King Industrial

26" x 12" Single Drum Sander

On sale for $1699
Buy Now!

bullet26" width by 12" thickness capacity
bullet Variable feed speed
bulletHeavy-duty base and steel frame provides stability during operation
bulletThe parallelism between the sanding drum and the conveyor table is easily adjusted by turning adjustment screws
bulletMagnetic safety switch
bulletTwin 4" dust chutes for dust collector hook-up
bulletA metric and imperial depth scale is provided for thickness adjustment

Available as:

Model KC-26-1-D
Sanding drum motor 2 HP / CV, 9amp, 220V
Conveyor belt motor 1/6 HP / CV, 220V, 1 phase
Maximum width of sanding 26"
Maximum thickness of board 12"
Minimum thickness of board 1/4"
Minimum length of board 5"
Abrasive belt 5" x 120"
Variable feeding speed 3-20 S.F.P.M.
Number of sanding drums 1
Sanding drum speed 1,550 R.P.M.
Voltage 220V, 60Hz, 1 phase
Dimensions (LxWxH) 45" x 30 1/2" x 49"
Weight 425 lb
Click here for the service manual & parts list for Model KC-26-1-D 26" x 12" Single Drum Sander

Click here for the instruction manual for Model KC-26-1-D 26" x 12" Single Drum Sander

King Industrial

26" x 12" Drum Sander

Click here to enlarge

On sale for $1999
Buy Now!

bulletHeavy duty base and steel frame provides stability during operation
bulletThe parallelism between the sanding drums and the conveyor table is easily adjusted by turning adjustment screws
bulletMagnetic safety switch
bulletTwin 4” dust chutes
bulletA metric and imperial depth scale is provided for thickness adjustment
bulletTwo 5” aluminium sanding drums are precision balanced and driven by 2 V-belts
bulletVariable Feed Speed

Available as:

Model KC-26DS
Drum Motor 3 HP, 220 Volt, 1 Phase
Belt Feed Motor 1/4 HP, 220 Volt, 1 Phase
Maximum width of sanding 26"
Maximum thickness of board 12"
Minimum thickness of board 1/4"
Minimum board length 5"
Feeding Speed 6 - 30 SFPM (Variable)
Number of sanding drums 2
Drum speed 1,600 RPM
Voltage 220V, 1 Phase, 60 Hz
Dimensions (LXWXH) 45" x30-1/2" x 49"
Weight 485 lbs
Click here for the service manual & parts list for Model KC-26DS 26" x 12" Drum Sander

Click here for the instruction manual for Model KC-26DS 26" x 12" Drum Sander

King Industrial

6” X 108” Oscillating Edge & Spindle Sander

On sale for $1999

Buy Now!

bulletPowerful 2 HP motor
bulletPrecision ground cast iron tables
bulletOcillating sanding belt tilts from 0 - 900 instead of the table
bulletBalanced 7” aluminum drive wheel and 3-7/8” idler rubber wheel ensure positive grip
bulletQuick release sanding belt tension lever
bulletGraphite pad diminishes belt friction for increased sanding belt life
bulletTwo 4” dust chutes mounted on hinged safety guards provide optimal dust collection
bulletMagnetic safety switch and top mounted emergency stop button
bulletIncludes miter gauge, work stop, three end-table inserts and three 4-1/2” high spindle drums and sanding sleeves (1-1/2”, 2”, 3”)

Available as:

Model KC-6108-OSC
Belt 6" x 108"
Dimensions (LxWxH) 60" x 28" x 49"
Table size (front) 35 1/2" x 12"
Table size (side) 10" x 11 1/2"
Belt speed 3,230 SFPM/ pi/min
Motor 12 Amp.
Voltage 220V, 1 phase, 60 Hz
Belt oscillation stroke 1/2"
Table travel 4"
Weight 595 lbs.
Click here for the service manual & parts list for Model KC-6108-OSC 6" x 108" Oscillating Edge & Spindle Sander

Click here for the instruction manual for Model KC-6108-OSC 6" x 108" Oscillating Edge & Spindle Sander

 King Industrial

16" Single Drum Sander

ON SALE FOR $999
Buy Now!

bullet16" width by 5" thickness capacity
bulletVariable feed speed
bulletHeavy duty open steel stand provides stability during operation
bulletThe parallelism between the sanding drum and the conveyor table is easily adjusted by turning adjustment screws
bullet4" dust chute for dust collector hook-up
bulletA metric and imperial depth scale is provided for thickness adjustment

Available as:

Model KC-16-1-D
Sanding drum motor 1.5 HP, 13 amp, 110V
Conveyor belt motor 1/8 HP, 110V, 1 phase
Maximum width of sanding 16"
Maximum thickness of board 5"
Minimum thickness of board 1/4"
Minimum length of board 5"
Abrasive belt 5" x 90"
Variable feeding speed 6-20 SFPM/min
Number of sanding drums 1
Sanding drum speed 1,550 RPM
Voltage 110V, 60Hz, 1 phase
Dimensions (LxWxH) 39-1/4" x 23-1/4" x 48-1/2"
Weight 300 lbs

Home ] Up ]

 We welcome all inquiries on our products.  Please use Feedback form to contact us.

Please note that all prices in all categories are listed in Canadian Dollars.  All items are subject to 15% Harmonized Sales Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST) when shipped to British Columbia.  All other provinces/territories are subject to 5% Goods and Service Tax (GST).  International and United States sales are tax exempt (duty and brokerage fees, if applicable, are the responsibility of the purchaser). 
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).  Not all items can be shipped due to weight and size factors.  Items marked free shipping are for within Canada and the USA (with the exception of remote locations)). We do not ship chemical products or insecticides.  All prices subject to change without notice.  Not all items may be available at all times.  We reserve the right to choose our customers and to limit quantities if needed.  Website is also subject to error.  If a pricing error is discovered it will be fixed, however we are not obliged to sell for the error.  Website pricing may differ from in-store pricing. 

We accept VISA, Mastercard or American Express. You can also send a money order or check, in which case we will wait for it to clear prior to shipping out the goods.  In some cases, Paypal will be used as a payment method. 

Copyright © 2012 UJ Robichaud TIMBR Mart. Last modified: 04/22/12