Home English/French Feedback Privacy Policy Air Miles Rentals Search

Up
Air Miles. Travel and More.



submit to reddit

NHRA Retail Innovators of the Year
 

 

 


Jet Pumps

Flotec

Flotec Jet Pump with Tank FP410515H

CAST IRON JET/TANK SYSTEM 1/2 HP
Cast-iron jet pump & tank for shallow well. Ideal for compact installations where space is limited. Pump comes already mounted on tank, allowing for minimal installation time and no need to purchase separate hook-up kit. Ideal for pumping levels of 25 feet or less. Pump features maximum pressure of 63 PSI. Self-priming after initial fill. Pressure switch pre-set to 30-50 PSI setting. Pressure gauge recommended. 1" inlet and outlet. Pre-charged 15-gallon equivalent diaphragm tank. 1 year warranty. 1/2 HP - 115V. Manufactured by Flotec

Corrosion-resistant shallow well jet/tank system is ideal for compact installations where space is at a premium. Pump comes already mounted on tank.
KEY FEATURES
Superior performance at depths to water of 25' or less
Pump tank system pre-assembled and ready to install
Ready to install 115 volt 1/2 HP motor
Pre-charged 15 gallon equivalent diaphragm tank
Maximum pressure of 63 PSI
WARRANTY
1 year limited warranty

Specs:

BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 5.1 GPM
FLOW AT 10' LIFT and 40 PSI: 4.5 GPM
MAX LIFT: 25'
MAX PSI: 63 psi
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1"
MINIMUM SUCTION PIPE SIZE: 1"
DRIVE PIPE SIZE: n/a
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 7.2 amps
VOLTAGE: 115v, 60 Hz
RECOMMENDED BREAKER: 15 amps
JET KIT: included
ACCESSORIES INCLUDED: none
TANK DRAWDOWN: .6 gal

Sku 73823-51, Model FP410515H, $294.99 each Buy Now!

Click here for manual for FP410515H Flotec Jet Pump with Tank
Click here for part list for FP410515H Flotec Jet Pump with Tank

   

CAST IRON SHALLOW WELL JET PUMP 1/2 HP FLOTEC FP4112

CAST IRON SHALLOW WELL JET PUMP 1/2 HP
Superior performance at depths to water of 25' or less. Rugged, heavy-duty cast iron pump housing. Heavy-duty motor 1/2 HP. Self-priming after pump housing is initially filled (Check Valve or Foot Valve required). Pressure switch pre-set with 30-50 PSI pressure setting. 1-1/4" NPT suction and 1" NPT discharge pipe sizes. Fully serviceable unit - easy access clean out port. Capacities up to 8.5 gallons per minute at 40 PSI - Maximum pressure of 69 PSI. Ready-to-install 115 Volt motor. Black. 1/2 HP. Manufactured by Flotec

Cast iron shallow well jet pumps provide superior performance and high capacities with more pressure for shallow wells 25' or less. All units feature dual voltage motor.
KEY FEATURES
Superior performance at depths to water of 25' or less
Rugged, heavy-duty cast iron pump housing
Ready-to-install 230 volt motor - see manual for 115 volt conversion
1-1/4" NPT suction and 1" NPT discharge pipe sizes
WARRANTY
1 year limited warranty

Specs:

BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 8.5 GPM
FLOW AT 10' LIFT and 40 PSI: 7.8 GPM
MAX PSI: 56 psi
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4"
MINIMUM SUCTION PIPE SIZE: 1"
DRIVE PIPE SIZE: n/a
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 9.4 amps
VOLTAGE: 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp
LIQUID TEMP RANGE: 32°F-140 °F (0°C-60 °C)
JET KIT: included
ACCESSORIES INCLUDED: none

Sku 76012-97, Model FP4112, $229.99 each Buy Now!

Click here for manual for FP4112 Cast Iron Shallow Well Jet Pump 1/2 HP
Click here for parts list for FP4112 Cast Iron Shallow Well Jet Pump 1/2 HP

   

Flotec CAST IRON CONVERTIBLE JET PUMP 1/2 HP FP4212

CAST IRON CONVERTIBLE JET PUMP 1/2 HP
Superior performance at depths to water of 100' or less. Rugged, heavy-duty housing pump. INCUDES: 1/2 HP heavy-duty motor and pressure regulator. Self-priming after housing pump is initially filled. (Check Valve or Foot Valve required) Pressure switch pre-set with 30-50 PSI pressure setting. These pumps include jet package for shallow and deep well applications. For shallow well applications: capacities up to 7.9 gpm at 40 PSI (at depths to water of 25' or less). For deep well applications: capacities up to 5.9 gpm at 40 PSI (at depths to water of 100' or less). Colour - black. 115 V. Convertible 1/2 HP. Manufactured by Flotec

KEY FEATURES
Superior performance at depths to water of 100' or less
Rugged, heavy-duty pump housing
Ready-to-install 230 volt motor - see manual for 115 volt conversion
Pressure switch pre-wired with 30-50 PSI pressure setting
WARRANTY
1 year limited warranty

Specs:

BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 11.9 GPM (shallow setup)
FLOW AT 10' LIFT and 40 PSI: 7.1 GPM (shallow setup)
MAX LIFT: 25' for shallow setup / 70' for deep setup
MAX PSI: 60 psi (shallow setup) / 54 psi (deep setup)
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4"
MINIMUM SUCTION PIPE SIZE: 1-1/4"
DRIVE PIPE SIZE: 1"
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 9.4 amps
VOLTAGE: 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp
JET KIT: FP4855-P2 for shallow / FP4800-P2 for 4" or larger deep / FP4840-P2 for 2" deep

Sku 76013-05, Model FP4212J, $244.99 each Buy Now!

Click here for manual for FP4212 Convertible Jet Pump 1/2 HP
Click here for parts list for FP4212 Convertible Jet Pump 1/2 HP

   

 

THERMOPLASTIC SHALLOW WELL JET PUMP 3/4 HP
Capacities up to 12.0gallons per minute at 40 PSI ( Average household use 6-10 gpm) Ready to install 230 Volt Motor- see manual for 115 volt conversion. 3/4 HP

This new revision of an "old hand" provides good pressure pumping from wells where the depth-to-water is 25' or less.

KEY FEATURES
Perfect for shallow wells (depth-to-water less than 25')
Thermoplastic construction for higher corrosion resistance
1-1/4" Suction / 1" Discharge
Comes with pre-wired 30/50 pressure switch

Specs:

BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 3/4
MAXIMUM CAPACITY: 12.1 GPM
FLOW AT 10' LIFT and 40 PSI: 10.2 GPM
MAX LIFT: 25'
MAX PSI: 78 psi
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4"
MINIMUM SUCTION PIPE SIZE: 1-1/4"
DRIVE PIPE SIZE: n/a
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 6.1 amps on 230v / 12.2 amps on 115v
VOLTAGE: 230v / 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp on 230v / 20 amp on 115v
LIQUID TEMP RANGE: 32°F-140 °F (0°C-60 °C)
AGENCY LISTING:
JET KIT: included
ACCESSORIES INCLUDED: none

Sku 73819-65, Model FP4022, $274.99 each Buy Now!

Click here for manual for FP4022 Thermoplastic Shallow Well Jet Pump 3/4 HP
Click here for parts list for FP4022 Thermoplastic Shallow Well Jet Pump 3/4 HP

   

CAST IRON CONVERTIBLE 3/4 HP JET PUMP fp4222 flotec

CAST IRON CONVERTIBLE 3/4 HP JET PUMP
Superior performance at water depths of 100' or less. Rugged, heavy-duty pump housing. Includes 3/4 HP heavy-duty motor and pressure regulator. Self-priming after pump housing is initially filled (Check Valve or Foot Valve required). Pressure switch pre-set with 30-50 PSI pressure setting. Includes ejector kit for shallow and deep well application. For Shallow Well Applications: capacities up to 11.9 gpm at 40 PSI (at water depths of 25' or less). For Deep Well Applications: capacities up to 7.5 gpm at 40 PSI (at water depths of 100' or less). Black. 115 / 230 V.

Cast iron convertible jet pumps can be used in shallow or deep well applications in " diameter wells or larger and are pre-set for 30-50 PSI operation.
KEY FEATURES
Superior performance at depths to water of 100' or less
Rugged, heavy-duty pump housing
Ready-to-install 230 volt motor - see manual for 115 volt conversion
Pressure switch pre-wired with 30-50 PSI pressure setting
WARRANTY
1 year limited warranty

Specs:

BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 3/4
MAXIMUM CAPACITY: 11.9 GPM (shallow setup)
FLOW AT 10' LIFT and 40 PSI: 10.8 GPM (shallow setup)
MAX LIFT: 25' w/ shallow setup / 100' w/ deep well setup
MAX PSI: 60 psi w/ shallow setup / 54 psi w/ deep setup
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4"
MINIMUM SUCTION PIPE SIZE: 1-1/4"
DRIVE PIPE SIZE: 1"
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 6.1 amps on 230v / 12.2 amps on 115v
VOLTAGE: 230v / 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp for 230v / 20 amp for 115v
LIQUID TEMP RANGE:
AGENCY LISTING:
JET KIT: FP4855-P2 for shallow / FP4800-P2 for 4" or larger deep / FP4840-P2 for 2" deep
ACCESSORIES INCLUDED: none

Sku 76256-35, Model FP4222J, $339.99 each Buy Now!

Click here for manual for FP4222 Cast Iron Convertible Jet Pump 3/4 HP
Click here for parts list for FP4222 Cast Iron Convertible Jet Pump 3/4 HP

   

fp4212


CONVERTIBLE 1/2 HP JET / 6 GALLON TANK SYSTEM
Superior performance at water depths of 100' or less. Rugged, heavy-duty pump housing. Includes 1/2 HP heavy-duty motor and pressure regulator. Self-priming after pump housing is initially filled (Check Valve or Foot Valve required). Pressure switch pre-set with 30-50 PSI pressure setting. Ejector kit for shallow and deep well application included. TANK FEATURES: Pre-charged 6 gallon tank is more efficient than conventional tanks of the same physical size because it delivers up to twice the amount of water between pump cycles. Extends pump life; maximum draw down (usable water) is provided consistently on every cycle. Rugged construction of heavy gauge steel with baked-on finish on outside for maximum corrosion resistance. Air/water separator eliminates "water logging". Water never touches metal components. Black and blue. 115 V.

Sku 76256-68, Model FP4212J15H, $389.99 each Buy Now!

   

CONVERTIBLE JET PUMP 1 HP
"Convertible Deep Well Jet Pump. High-performance motor with thermal overload protection. For private well applications to 90' depth to water. Rugged cast iron construction. Built-in 30/50 PSI adjustable pressure switch for best performance. Ideal for medium flow sprinkler applications. Dual voltage for 115V or 230V operation (Factory set for 230V). Includes jet package for shallow and or deep well application. Black." Water Ace brand

Sku 76376-30, Model RC10C, $199.99 each

Pressuremate Pumps

Wicor Canada

"PRESSUREMATE" PUMP
Designed to increase home water pressure in multiple applications. Capacity of up to 26 gallons per minute with maximum pressure boost of 40 PSI. Adjustable starting pressure dial provides maximum desired performance. Controller turns pump on and off automatically. Extremely quiet function for indoor use. Heavy-duty motor with maintenance free operation. 1" NPT intake and discharge. Pre-wired for 115 V. 6-ft power cord. Large mounting base. Assembled, ready to install. 3/4 HP

Sku 73820-88, Model 3075SS, $404.99 each

   

HIGH PERFORMANCE GAS ENGINE PUMP 5.5 HP FLOTEC FP5455

HIGH PERFORMANCE GAS ENGINE PUMP 5.5 HP

Driven by a powerful .51 / 2 horsepower, lightweight, portable, equipped with a sturdy handle, easy portability to transfer water to remote areas, excellent for pumping water from flooded areas if there is no current, practical distance for irrigation if water pipes are not available, use easy with a hand throttle, a flying start, a fuel valve and stop the motor, check valve incorporated hose 2 "and fittings sold separately

Driven by a high performing, 5-1/2 HP engine. Lightweight portable unit with rugged carrying handle. Easy portability for water transfer in remote locations.

KEY FEATURES
Excellent for floodwater removal when power source is out
Convenient for remote irrigation where water ines are not available
Manual throttle, choke, fuel valve and engine shut-off controls
Built-in check valve
2" hoses and connections sold separately

WARRANTY
1 year limited warranty

SPECS

MAXIMUM CAPACITY: 8460 GPH
HORSEPOWER: 5.5

Sku 73815-10, Model FP5455, $409.99 each

Click here for manual for FP5455 High Performance Gas Engine Pump 5.5HP
Click here for parts list for FP5455 High Performance Gas Engine Pump 5.5HP

   

PORTABLE UTILITY TRANSFER/PRESSURE BOOST PUMP 1/2 HP FP5112 FLOTEC

PORTABLE UTILITY TRANSFER/PRESSURE BOOST PUMP 1/2 HP

Portable booster pumps for general use, can be used for a variety, use at home, including the sprinkler system to increase the water pressure and drainage. They can feed several sprinklers when water is pumped from a lake, stream, or pond. They can also be used to increase the pressure of running water in the municipality. Delivers up to 39 liters of water per minute, stiff and stuffed convenient transportation, air-cooled engine running on single phase 115-Volt with on-off switch

Portable utility booster pump manages a variety of home applications including sprinkling, pressure boosting and dewatering.

KEY FEATURES
Can be used as a portable sprinkler pump
Ideal for boosting pressure to wash cars, boats and farm equipment
115V air cooled motor

WARRANTY
1 year limited warranty

SPECS

MAXIMUM CAPACITY: 618 GPH
HORSEPOWER: 1/2

Sku 73828-80, Model FP5112, $209.99 each Buy Now!

Click here for manual for FP5112 Portable Utility Transfer/Pressure Boost Pump 1/2 HP
Click here for parts list for FP5112 Portable Utility Transfer/Pressure Boost Pump 1/2 HP

Jet Pump Accessories

JET PUMP GASKET KIT
Ejector gasket/body gasket. Type RPK-G

Sku 30541-11, Model 750230, $7.39 each

   

DRILL PUMP WITH HOSE KIT FOR WATER REMOVAL - 225 GPH FLOTEC FPDMP21HC

DRILL PUMP WITH HOSE KIT FOR WATER REMOVAL - 225 GPH
Use with electric drill, minimum 1200 RPM. Compact design. Perfect for emptying dishwashers, washing machines, aquariums and clogged sinks. Allows for easy oil changes on mowers, boats and cars. Thermoplastic construction.

Parts2O (TM) Brand

With the Hose kit included in the FPDMP21HC you can tackle many of those chores where water is not where it belongs.
KEY FEATURES
Multi-purpose pump
Maximum pumping capacities up to 225 GPH
Easy, do-it-yourself
Drill pump with hose kit
90 Day Warranty

Sku 73827-99, Model FPDMP21HC, $13.49 each Buy Now!

   

PUMP DISCHARGE HOSE KIT FP2731 flotec

PUMP DISCHARGE HOSE KIT
Discharge hose with fitting for gas pump # 560655 (73815-10). 2" x 25'

Sku 73823-02, Model FP2731, $72.99 each

   

PUMP SUCTION HOSE KIT fp2735 flotec

PUMP SUCTION HOSE KIT
Hose with fittings and suction screen for gas engine pump. 2" x 15'. Suction rated for use pulling water into the pump.

Sku 73823-10, Model FP2735, $82.99 each

Home ] Up ]

 We welcome all inquiries on our products.  Please use Feedback form to contact us.

Please note that all prices in all categories are listed in Canadian Dollars.  All items are subject to 15% Harmonized Sales Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST) when shipped to British Columbia.  All other provinces/territories are subject to 5% Goods and Service Tax (GST).  International and United States sales are tax exempt (duty and brokerage fees, if applicable, are the responsibility of the purchaser). 
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).  Not all items can be shipped due to weight and size factors.  Items marked free shipping are for within Canada and the USA (with the exception of remote locations)). We do not ship chemical products or insecticides.  All prices subject to change without notice.  Not all items may be available at all times.  We reserve the right to choose our customers and to limit quantities if needed.  Website is also subject to error.  If a pricing error is discovered it will be fixed, however we are not obliged to sell for the error.  Website pricing may differ from in-store pricing. 

We accept VISA, Mastercard or American Express. You can also send a money order or check, in which case we will wait for it to clear prior to shipping out the goods.  In some cases, Paypal will be used as a payment method. 

Copyright © 2012 UJ Robichaud TIMBR Mart. Last modified: 04/22/12