TEMPERATURE / PRESSURE RELIEF VALVE
Two-in-one Temperature and Pressure relief valves provide the least
expensive and proven means for protection against both excessive temperature
and pressure emergency conditions. Reliable and proven means of protection
against excessive temperature and pressure build-up in domestic hot water
systems. NPT male inlet and female outlet. Temperature relief 210F (99C).
Pressure relief range 75 to 150 psi. Thermo bonded protective coating on
thermostat. AGA Rating 80,000 Btu/hr. 3/4"
Sku: 30222-33, Model 4626, $17.99 each
Buy Now!
TEMPERATURE / PRESSURE RELIEF VALVE Self
closing T & P safety relief valves. Two-in-one Temperature and Pressure
relief valves provide the least expensive and proven means for protection
against both excessive temperature and pressure emergency conditions.
Reliable and proven means of protection against excessive temperature and
pressure build-up in domestic hot water systems. Includes test lever. NPT
male inlet and female outlet. Temperature relief 210F (99C). Pressure relief
range 75 to 150 psi. AGA Rating 100,000 BTu/hr. 3/4"
125 PSI
- Sku: 30225-89, Model 66165, Price: $13.99
150 PSI - Sku: 30226-47, Model 66166,
Price: $12.99
TEMPERATURE/PRESSURE RELIEF VALVE 100XL
3/4''. Has test lever and 4'' extension thermostat. Male inlet and female
outlet. Pressure range 75-150 lbs. Standard settings 75, 100, 125 and 150
lbs. Temperature relief 210 deg.F. Height (less thermostat) - 3-1/2'' Width
- 1-7/8'' Weight - 7/8 lb A.C.A./C.G.A. Temp. Steam BTU/Hr. - 100,000.
3/4" x 4". Waterline Products
Sku 30222-25, Model 1043081, $16.99 each
Buy Now!
(discontinued, limited stock on hand)
Vacuum Breaker
VACUUM RELIEF VALVE For Water
Heater Service Relief Valves and Automatic Gas Shut-Off Devices, Design
Certified by A.G.A. and C.G.A. listed. Automatically vents a system if
vacuum occurs. Opens at less than 1/2'' vacuum. Design features a dry guide
which is located out of the water and thus not exposed to corrosion.
Construction is bronze body with silicone disc. Maximum water pressure 300
lbs. Maximum temperature 250 deg.F. Also suitable for steam service. NOTE:
Vacuum Relief Valves are not designed or approved for use as backsiphonage
backflow preventers. 1/2'' - Venting Capacity: 13.5 CFM Height: 2-3/8''
Width: 1-3/4'' Weight: 3/8 lb.
Sku 12655-37, Model 1/2-N36M1-CAN,
$13.49 each
VACUUM BREAKER Hose
connection vacuum breaker. Furnished with exclusive patented "non-removable"
feature. Standardly equipped to all sill cock to be drained. Constructed of
durable, corrosion resistant, reinforced thermoplastic. Tamper-proof
feature. 3/4" F x 3/4" M
VACUUM BREAKER Brass
construction, backflow preventer with 3/4'' hose thread connections, break
off attachment screw for permanent installation. CSA approved. Bulk.
Sku 30621-14, Model 108-904, $9.79 each
Pressure Regulator
WATER PRESSURE REGULATOR - 25 AUB-Z3 Standard
capacity pressure regulator with bypass check valve and strainer. Bronze
body construction. 10% glass filled NORYL seat construction. Stainless steel
integral strainer. High temperature resisting Buna-N nylon insert diaphragm
for hot or cold water. Bronze threaded union inlet / threaded outlet.
Initial Pressure: Suitable for supply pressures up to 300 psi. Adjustable
reduced pressure range 25 to 75 psi. Maximum temperature 160F.
1/2"
-
Sku: 30227-46, Model 0068524, $62.99
Buy Now!
3/4" -
Sku: 30227-38, Model 0069717, $64.99
Buy Now!
PRESSURE REGULATOR With
gauge tapping. Bronze body construction. Suitable for supply pressures up to
300 psi. Adjustable reduced pressure range 25 to 75 psi. Maximum temperature
160F (71C).
Sku: 12952-86,
Model: 03G15/80,
$17.99 each
Buy Now!
SQUARE FLANGE ELEMENT For
electric water heater. TSR model 2.5" square, flat flange with
nickel-chromium alloy element coil, copper sheath, copper faceplate and
gasket.
3000W/240V/40WD - Sku 74433-44, Model 10G30-40, $25.99 each
Buy Now!
4500W/240V/40WD - Sku 74433-77, Model 10G45-40, 271.99 each
Buy Now!
Model 86325SP (Sku 76429-11)
WATER
HEATER ELEMENT
Element, Copper, Screw-In (Fitsall).
3000/2255W - Sku 76429-03, Model 86213SP, $20.99 each
4500/3375W - Sku 76429-11, Model 86325SP, $24.99 each
Buy Now!
WATER
HEATER ELEMENT
Element - 120V, 1500W, Copper, Screw-In (Fitsall).
Sku 76428-61, Model 86117SP, $16.49 each
WATER
HEATER ELEMENT
Element - 240V, 3000W, Copper, Stillman (Push-in) (Fitsall).
Sku 76428-53, Model 85935SP, $22.99 each
WATER
HEATER ELEMENT
Element, Copper, Universal Square Flange (Fitsall).
1500W/120V - Sku 76428-04, Model 85100SP, $17.49 each
1500W/240V - Sku 76428-12, Model 85104SP, $19.99 each
3000/2255W, 240/280V - Sku 76428-20, Model 85201SP, $18.99 each
4500/3375W, 240/208V - Sku 76428-46, Model 85304SP, $20.99 each
3800/2850W, 240/208V - Sku 76428-38, Model 85379SP, $18.99 each
Gaskets
SEPARATE GASKET For square flange type elements.
Flat -
Sku: 10903-49, Model 18G0002, $3.29 each
Buy Now!
Round - Sku: 10903-56,
Model 18G0005, $3.99 each
Buy Now!
ELEMENT GASKET
Gasket for 4-bolt square flanged element. Grey.
Sku 76428-79, Model 80303, $3.29 each
ELEMENT GASKET
Seal for Element for 2 1/2 USG (10L) Electric Water Heaters.
Sku 76428-87, Model 30013, $3.99 each
Thermostats
ELECTRIC WATER HEATER THERMOSTAT
Replacement thermostats, surface mounted. Adjustable temperature range from
90° to 150°F. Can also be screw-mounted, 3 screws. SINGLE POLE DOUBLE
DIRECTION 3000W, 230V. For top
Sku: 10902-24, Model TH3ZX002, $20.99 each
Buy Now!
HIGH LIMIT TEMPERATURE CONTROL FOR ELECTRIC WATER HEATER High
limit temperature control.
Sku:
10902-40, Model 301244(TH3ZX001), $15.99 each
Buy Now!
ELECTRIC WATER HEATER UPPER THERMOSTAT With
Hi-Limit control. 90° F to 150° F (32° C to 66° C). Carded
Sku: 10902-32,
Model: TH32X006, $29.99 each
Buy Now!
UPPER THERMOSTAT
Fitsall Upper, double pole, double throw thermostat with hi limit. Maximum
150°F. For most dual element water heaters. Black/Grey.
ANODE
Aluminum Hex Head Magnesium Anode Rod, 3/4" NPT x .625. Grey. 48"
Sku 76427-88, Model 71930, $62.99 each
ANODE
Aluminum Hex Head Magnesium Anode Rod, 3/4" NPT x .625. Grey. 39"
Sku 76427-96, Model 71921, $13.99 each
Other Accessories
WATER HEATER PLASTIC PAN
Manufactured from semi-flexible, tough and durable 0,625" plastic polymer.
Will not rust or corrode. Pan comes with 1" PVC fitting. Pans are
pre-drilled to accommodate fitting. Recommended for electric water heater.
10" - Sku 12832-66, Model 104557HC, $33.99 each
12" - Sku 12832-58, Model 104559HC, $34.99 each
BACKFLOW PREVENTER Dual
Check Backflow Preventors For use at the drinking water supply service
entrance or with individual outlets. Designed for non-health hazard
residential water system containment and continuous pressure applications.
Bronze body construction. Uses two compact replaceable check modules. Buna-N
seals and stainless steel springs. Installed immediately downstream of the
residential water meter. Can be installed vertically or horizontally.
3/4" - Sku: 30223-16, Model 61791,
$36.99
1" - Sku: 30223-32, Model 61793,
$36.99
DUAL CHECK VALVE with Intermediate Atmospheric Vent (Backflower Preventer)
This Dual Check with Atmospheric Vent is specially made for smaller supply
lines and ideally suited for laboratory equipment, processing tanks,
sterilizers, dairy equipment and similar applications. It is particularly
recommended for boiler feed lines to prevent backflow when supply pressure
falls below system pressure. True line-sized construction allows the check
modules to open further allowing dirt and debris to pass more freely
reducing check fouling. Stainless steel internal parts. Maximum flow at low
pressure drop. Furnished with union connections to facilitate removal and
replacement for maintenance. Compact for economy combined with performance.
Design simplicity for easy maintenance. Can be installed vertically or
horizontally.
Series 9D Dual Check
Valves with Intermediate Atmospheric Vent prevent the reverse flow of hot or
cold polluted water from entering into the potable water supply. It consists
of a brass body with stainless steel internal parts, integral strainer, and
two durable, tight-sealing, rubber check valves. Series 9D is designed for
continuous pressure, non-health hazard applications in smaller supply lines,
such as laboratory equipment, processing tanks, sterilizers, dairy
equipment, and specifically for boiler feed lines. Minimum Working Pressure:
25psi (172kPa), Maximum Working Pressure: 175psi (12.06 bar)
3/4" 9D-M2 CAN
Sku: 30227-53, Model 0062026
Price: $44.99
Buy Now!
DRAIN ELBOW For
draining valves. 3/4". Waterline Products
Drain Elbow
Sku: 30515-13, Model 1044031, $5.99
Drain Tube x 42" Poly
Sku: 30515-88, Model 1044051, $8.29
WATER HEATER
DIELECTRIC UNION Female
iron pipe thread x copper solder joint, prevents electrolysis or galvanic
action when connecting dissimilar materials. For use with water up to 210
deg.F. 3/4'' copper x 3/4'' female pipe thread. Model 168-004
1/2" FXS - Sku 75373-84, Model 168-003, $12.49 each
3/4" copperXfem - Sku: 30645-08,
Model 168-004, $14.99 each
THERMOSTATIQUE MIXING VALVE Brass
3/4" - Hot Water Temperature Control Valves
- Lists as
Being 3/4" 1170C-US which is union solder ends.
Series 1170C-M2 Hot Water Temperature Control Valves
are used in commercial, residential, and institutional applications to
reduced the temperature of the hot water supply. It consists of a bronze
body construction with union thread (-UT), union solder (-US), PEX or CPVC
end connections, integral check valves, copper thermostat assembly,
stainless steel disc and spring, Buna-N or EPDM O-rings, and Udel pistons.
Series 1170C-M2 features a double-throttling design that combines the
control of hot and cold water to provide a sensitive response to changes in
water temperature passing through the mixing chamber. Series 1170C-M2
temperature range: 90°F to 120°F (32°C to 49°C). Maximum Pressure: 150psi
(10 bar).
HOT WATER TANK INSULATION Electric
and gas hot water tank fiberglass insulation blanket 60-40-33 gallons (
273-182-150 litres). Prevents heat loss on hot water heater. Easy to
install. Tape included. 2" (5.08 cm) thick, 48" (1.22 m) wide, 87" (2.21 m)
long, 29 sq ft. (2.69 m ca). Made by RCR International.
We welcome all inquiries on our products. Please use
Feedback form to
contact us.
Please note that all prices in all categories are
listed in Canadian Dollars. All items are subject to 15% Harmonized Sales
Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when
shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST)
when shipped to British Columbia. All other
provinces/territories are subject to 5% Goods and Service Tax (GST). International and United States sales are
tax exempt (duty and brokerage fees, if applicable, are the responsibility of
the purchaser).
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).
Not all items can be shipped due to weight and size factors. Items marked
free shipping are for within Canada and the USA (with the exception of remote
locations)). We do not
ship chemical products or insecticides. All prices
subject to change without notice. Not all items may be available at all
times. We reserve the right to choose our customers and to limit
quantities if needed. Website is also subject to error. If a pricing
error is discovered it will be fixed, however we are not obliged to sell for the
error. Website pricing may differ from in-store pricing.
We accept VISA, Mastercard or American Express. You can also send a money order
or check, in which case we will wait for it to clear prior to shipping out the
goods. In some cases, Paypal will be used as a payment method.