DEPRESSED CENTER GRINDING WHEEL Type 27.
Silicon carbide blade for masonry polishing or grinding. 1/4" designed for
offhand stock removal of all types of masonry, smoothing welds and pipe
beveling. 1/8" designed to be used at 90º angle for offhand cut-off of all
masonry and notching or cleaning pipes and weld beads. Bulk (with UPC). 4" x 1/4" x
5/8" - Sku 12100-20, Model 75912, $3.29 each
4 1/2" x 1/4" x 7/8" - Sku 12123-07, Model 75944, $3.49 each
5" x 1/4" x 7/8" - Sku 12122-81, Model 75902, $5.29 each
DEPRESSED CENTER GRINDING WHEEL Type 27.
Aluminum oxide blade for metal polishing or grinding. 1/4" designed for
offhand stock removal of all types of metal, smoothing welds and pipe
beveling. 1/8" designed to be used at 90º angle for offhand cut-off of all
metal and notching or cleaning pipes and weld beads. Bulk (with UPC). 4" x 5/8" x
1/8", Grit 24, 13,500 Max
RPM - Sku 12121-82, Model 75930, $4.29 each 4" x
5/8" x 1/4", Grit 24, 13,500 Max
RPM - Sku 12122-16, Model 75926, $5.29 each
4-1/2" x 7/8" x 1/8", Grit 30, 12,000 RPM - Sku 12122-40, Model 75910, $5.29
each
4-1/2" x 7/8" x 1/4", Grit 24, 12,000 RPM - Sku 12122-65, Model 75922, $5.29
each 5" x
1/8" x 7/8", 12,225 RPM - Sku 12122-99, Model 75916, $5.29 each 5" x
7/8" x 1/4", 24 Grit, 10,850 Max RPM - Sku 12123-15, Model 75918, $5.29 each 7" x
7/8" x 1/4", 24 Grit, 8,500 Max RPM - Sku 12123-56, Model 75936, $6.79 each
CHOP SAW BLADE Fastcut
reinforced chop saw blades are intended for low horsepower machines and
metal cutting jobs. Designed for most general purpose chop saw applications.
Fully reinforced blade with durable aluminum oxide grain provide bast
bur-free cuts. For A36P Chop Saw. Max. RPM 4365. 7/64'' x 1''. 14" Metal
Sku 12119-03, Model 89399, $11.49 each
ROTARY RASP For use
in cutting, shaping or forming. Used on wood, plastic or rubber. Made from
hardened and tempered steel. Will not clog. Cutting edges designed to stay
sharp. Maximum rpm 5,000. Cylindrical. 5/8''D x 1-3/8'' L.
Sku 12800-98, Model 2530, $4.99 each
ROTARY FILE
Cylindrical. 1/2"W x 1 3/8"L
Sku 12801-55, Model 2534, $6.29 each
CONICAL ROTARY FILE 5/8'' D x
1-3/8'' L.
Sku 12801-14, Model 2532, $3.99 each
ROTARY FILE
Cylindrical round end. 1/2"D x 1 3/8"L
Sku 12802-13, Model 2537, $4.99 each
RASP & FILE SET - 4 PC. 4 Piece
Set includes: # 2534, 2535, 2530 and 2532.
2534 File- Cylindrical 1/2"D x 1-3/8"L
2535 File- Conical 1/2"D x 1-38"L
2530 Rasp- Cylindrical 5/8"D x 1-3/8"L
2532 Rasp- Conical 5/8"D x 1-3/8"L
Sku 12802-39, Model 2541, $12.99/set
CYLINDER GRINDING STONE Grinding
stones, may be used in any 3/8" or 1/2" drill. Also convenient for use in
flexible shafts. Made from vitrified aluminum oxide. Variety of shapes and
sizes to shape, grind, etch and de-burr hard metals, glass, tile and
masonry.
7/16" dia.
x 7/8" Sku 12800-64, Model 2171, $3.99 each
1" dia. x 9/26" - Sku 12589-95, Model 2172, $5.29
each
CONE GRINDING STONE Grinding
stones, may be used in any 3/8" or 1/2" drill. Also convenient for use in
flexible shafts. Made from vitrified aluminum oxide. Variety of shapes and
sizes to shape, grind, etch and de-burr hard metals, glass, tile and
masonry.3/4" dia.
x1 1/8"
Sku 12800-80,
Model 2173, $3.99 each
POINTED GRINDING STONE Grinding
stones, may be used in any 3/8" or 1/2" drill. Also convenient for use in
flexible shafts. Made from vitrified aluminum oxide. Variety of shapes and
sizes to shape, grind, etch and de-burr hard metals, glass, tile and
masonry.3/4" dia.
x1 1/8"
Sku 12801-06, Model 2174, $3.99 each
5 PIECES MOUNTED STONE SET May be
used in any 3/8'' or 1/2'' drill. Convenient for use in flexible shafts.
Made from vitrified aluminum oxide. Variety of shapes and sizes to shape,
grind, etch and de-burr hard metals, glass, tile and masonry. Includes 1 of
each of above: # 2170, 2171, 2172, 2173 and 2174.
Sku 12801-22, Model 2144, $12.99/set
DRUM & SLEEVE SANDER ASSORTMENT 3 Pieces.
Sands wood and removes paint in difficult hard to reach areas. Quality
replaceable cloth backed aluminum oxide sleeves are mounted on expandable
rubber drums that holds them tight. Use for variety of sanding applications.
Fits in most drill chucks. Caps in 1/4" shank, max. RPM 3000. Includes three
sizes: 1" x 1", 3/4" x 1/2", 1/2" x 1/2".
Sku 11221-18, Model 2650, $12.49/set
1/8" SHANK CHAIN SAW SHARPENING GRINDING WHEEL Precision
ground for quick, easy sharpening of chain saw blades.
5/32" - Sku 10951-81, Model 453, $6.29 each
3/16" - Sku 10951-99, Model 454, $6.29 each
GRINDING WHEEL Vitrified
grinding wheels used in everyday operations by home craftsmen and wheels
used in the general machine shop and auto repair shop for use on bench and
pedestal grinders. They are made of the famous Norton electric furnace
abrasive Alundum and will cut fast and cool with great endurance.
Fine, 5" x
3/4" x 1" - Sku 12814-01, Model 88205, $14.49 each
Medium, 5" x 3/4" x 1" - Sku 12814-19, Model 88210, $14.49 each
Fine, 6" x 3/4" x 1" - Sku 12106-24, Model 88235, $17.99 each
Medium, 6" x 3/4" x 1" - Sku 12106-16, Model 88240, $17.99 each
Coarse, 6" x 3/4" x 1" - Sku 12801-48, Model 8245, $17.99 each
GRINDING WHEEL Use for
deburring, removing and general purpose grinding. Use with mandrel #402.
Dimensions: 7/8'' by 1/8'' thick.
Sku 10950-33, Model 5000541, $3.79 each
ROTARY RASP Ball.
5/8'' D.
Sku 12801-30, Model 2533, $3.99 each
ROTARY FILE Special
alloy steel is hardened and tempered for long life and increased durability.
Precision cutting edges will not clog or load up. 1/4" shank fits all
drills. 1/2" x 7/8"
Sku 73944-48, Model 16671, $3.79 each
Sku 73944-71, Model 16672, $4.29 each
Sku 73945-05, Model 16674, $4.29 each
Sku 73945-54, Model 16676, $4.29 each
Sku 73946-38, Model 16677, $3.79 each
Sku 73946-79, Model 16678, $4.79 each (1/2" x 1/2")
ROTARY RASP Special
alloy steel is hardened and tempered for long life and increased durability.
Precision cutting edges will not clog or load up. 1/4" shank fits all
drills.
1/4" x 7/8" - Sku 73947-03, Model 16680, $4.49 each
5/8" x 1 1/8" - Sku 73947-37, Model 16681, $4.49 each
5/8" x 1 3/8" - Sku 73947-60, Model 16682, $4.49 each
5/8" x 1 3/8" - Sku 73947-94, Model 16684, $4.49 each
5/8" x 5/8" - Sku 73948-10, Model 16686, $4.79 each
GRINDING POINT
Recommended for grinding and shaping metal. Constructed of aluminum oxide
for fast removal of all types of metal. 1/4" shank fits die grinders and all
drills.
3/4" x 1 1/8", round pt tree - Sku 73941-25, Model 16701, $2.99 each
11/16" x 1 1/4", pointed tree - Sku 73941-58, Model 16702, $3.29 each
11/16" x 7/8", pointed cylinder - Sku 73941-82, Model 16703, $3.29 each
1 1/4" x 1/4", pointed edge - Sku 73942-08, Model 16706, $3.29 each
3/4" x 3/4", round ball - Sku 73942-32, Model 16708, $3.29 each
3/4" x 1 1/4", cylinder - Sku 73942-99, Model 16710, $2.99 each
1" x 3/8", wheel - Sku 73942-65, Model 16711, $3.29 each
KNIFE SHARPENING GRINDING POINT Quickly
and easily sharpens knives and scissors. Constructed of aluminum oxide for
fast sharpening. Beveled stone features accurate angle for proper sharpening
technique. 1/4" shank.
Sku 73943-23, Model 16730, $5.99 each
LAWN MOWER SHARPENER GRINDING POINT Quickly
and easily sharpens knives and scissors. Constructed of aluminum oxide for
fast sharpening. Beveled stone features accurate angle for proper sharpening
technique. 1/4" shank.
Sku 73943-56, Model 16731, $5.99 each
"KOMPETITOR" GRINDER CUTTING DISC General
purpose, economical, aluminum oxide grain wheel for fast stock removal.
Depressed center. Applications: structural steel, pipes, rebar, welds,
ferrous metals. 4½" x 1/4"
x 7/8" - Sku 74700-32, Model D247KR, $3.29 each
5" x 1/4" x 7/8" - Sku 74701-07, Model 547KR, $3.79 each
"KOMPETITOR" GRINDER CUT-OFF WHEEL General
purpose, economical, aluminum oxide grain wheel for fast grinding. Depressed
center. Applications: structural steel, pipes, rebar, welds, ferrous metals
and stainless steel. 4" x 0.45"
x 5/8" - Sku 74700-73, Model D405KR, $3.29 each
4" x 0.45" x 7/8" - Sku 74700-65, Model D207KR, $3.79 each
5" x 0.45" x 7/8" - Sku 74700-99, Model D507KR, $4.29 each
"KOMPETITOR" GRINDER CUT-OFF WHEEL General
purpose, economical, aluminum oxide grain wheel for a safe and exceptional
cut rate. Depressed center. Applications: structural steel, sheet and
ferrous metals. 4" x 1/8" x
5/8" - Sku 74700-81, Model D485KR, $2.79 each 4½" x
1/8" x 7/8" - Sku 74703-47, Model D287KR, $2.79 each 5" x
1/8" x 7/8" - Sku 74701-15, Model D587KR, $3.29 each
"KOMPETITOR GRINDER CUTTING DISC For angle
grinders. General purpose and fast cutting. Provides safety and a good cut
rate. Applications: structural steel, sheet metal, ferrous metals, pipes,
rebar and stainless steel. 4" x 0.45"
x 5/8" - Sku 74701-49, Model M405KR, $3.29 each 4½" x
0.45"x 7/8" - Sku 74701-23, Model M207KR, $3.29 each 5" x
0.45" x 7/8" - Sku 74701-56, Model M507KR, $3.79 each
"KOMPETITOR GRINDER CUTTING DISC For angle
grinders. General purpose and fast cutting. Provides safety and fast
cutting. Applications: structural steel, ferrous metals, pipes, rebar and
welds.4½" x
3/32"x 7/8"
Sku 74701-31, Model M237KR, $2.79 each
Cut Off Blades
"CUT OFF" BLADE Metal
cut-off blades are for iron, steel, brass, bronze, aluminum and copper
tubing, sheet metal, guttering, wire products, angle iron, pipe and tempered
masonite. Blades are made of reinforced, resinoid bonded aluminum oxide
abrasives. 7" x 1/8" x
D - Circular Saw, Carded - Sku 12116-63, Model 89005, $5.29 each 8" x 1/8" x
D - Circular Saw, Carded - Sku 12116-71, Model 89010, $5.49 each 7" x
1/8" x D - Circular Saw, Bulk - Sku 12100-46, Model 89097, $4.29 each 10" x
3/32" x 5/8" - Stationary Saw, Bulk - Sku 12100-53, Model 89390, $8.79 each 12" x
1/8" x 20mm - High Speed, Bulk - Sku 12118-38, Model 89357, $8.79 each
14" x 1/8" x 20mm - High Speed, Bulk - Sku 12118-79, Model 89360, $14.99
each
"CUT OFF" BLADE Made of
doubly reinforced, resinoid bonded silicon carbide. For cutting all types of
masonary, concrete, concrete block, cinder block, brick, sandstone, stone,
limestone, slate, ceramic tile, cork, fiberglass, formica, untempered
masonite and composition board. 7" x 1/8" x
D - Circular Saw, Carded - Sku 12116-30, Model 89055, $5.99 each 7" x 1/8" x
D - Circular Saw, Bulk - Sku 12100-38, Model 89088, $4.29 each 8" x
1/8" x D - Circular Saw, Carded - Sku 12116-55, Model 89070, $6.79 each 10" x
3/32" x 5/8" - Stationary Saw, Bulk - Sku 12100-61, Model 89391, $9.29 each 12" x
1/8" x 20mm - High Speed, Bulk - Sku 12118-61, Model 89351, $9.29 each
14" x 1/8" x 20mm - High Speed, Bulk - Sku 12118-95, Model 89354, $14.99
each
SMALL DIAMETER CUT-OFF BLADE Aluminum
oxide blade cuts steel, aluminum and bar stock up to 1'' diameter. Tough and
strong abrasive for long life. Reinforced for safe use. Maximum speed 25,465
RPM. For use on all popular electric and air die grinders for fast cut-off
and slotting of all types of metal.. 5 per package.3" x 1/16"
x 3/8"
Sku 12701-49, Model 47767, $10.49/pack
CUT-OFF WHEEL For all
ferrous materials (steel, cast iron) and other hard metals single sheet,
internal reinforce 1" arbor. 16"
Sku 74898-75, Model A-01367, $16.49 each
"CUT-OFF" BLADE Aluminum
oxide. Right angle grinder cut-off blades have a unique thin design for
cleaning, slotting and cutting metal. Cutting metal studs, angle iron,
tubing. Cutting autobody panels and sheet metal. METAL: For all ferrous
materials (steel, cast iron) and other hard metals. 4-1/2" x
1/16" x 7/8" - Sku 12120-42, Model 01617, $2.79 each
5" x 1/16" x 7/8" - Sku 12120-67, Model 01618, $3.29 each
"CUT-OFF" BLADE Silicon
carbide. For concrete, brick, cinder block, cement, patio stone and other
masonry cuts.
4-1/2" x 1/16" x 7/8" - Sku 12120-34, Model 01621, $4.99 each
5" x 1/16" x 7/8" - Sku 12120-59, Model 01622, $5.79 each
METAL CUT-OFF WHEEL 'Zip Mate
System'- Cut-off Zip Wheel for Metal. Cuts ferrous metals such as: Angle
iron, guttering, iron, pipe, sheet metal, stainless steel, wire products.
Also cuts tempered masonite. Diameter: 3 1/2". 2 per package.
Sku 10974-35, Model RZMET2, $8.99/pack
ABRASIVE CUT-OFF WHEEL For all
ferrous metals and other hard metals, reinforced with fiberglass to reduce
breakage. 14" x 1"
Sku 74898-26, Model
A90152, $10.49 each
ASSORTMENT OF 10 DISCS FOR 4½" GRINDER
10 Cutting & Grinding discs for 4½" grinders. 4 X 1/4" grinding wheels for
metal and 6 cutting wheels (3/64") for metal and stainless steel.
We welcome all inquiries on our products. Please use
Feedback form to
contact us.
Please note that all prices in all categories are
listed in Canadian Dollars. All items are subject to 15% Harmonized Sales
Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when
shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST)
when shipped to British Columbia. All other
provinces/territories are subject to 5% Goods and Service Tax (GST). International and United States sales are
tax exempt (duty and brokerage fees, if applicable, are the responsibility of
the purchaser).
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).
Not all items can be shipped due to weight and size factors. Items marked
free shipping are for within Canada and the USA (with the exception of remote
locations)). We do not
ship chemical products or insecticides. All prices
subject to change without notice. Not all items may be available at all
times. We reserve the right to choose our customers and to limit
quantities if needed. Website is also subject to error. If a pricing
error is discovered it will be fixed, however we are not obliged to sell for the
error. Website pricing may differ from in-store pricing.
We accept VISA, Mastercard or American Express. You can also send a money order
or check, in which case we will wait for it to clear prior to shipping out the
goods. In some cases, Paypal will be used as a payment method.
