Electrical Box

	REWORK DEVICE BOX "Loomex" clamps. Intermediate depth. Gangable. For the installation of devices between studs in closed wall applications. Their specially designed brackets provide a safe installation. "Swing-arm" rework brackets. Max. wall thickness : 3/4". 2-1/4" deep. 3" x 2". 10 cu. in. Sku 90503-29, Model 755-LD-CRT, $7.99 each

	REWORK DEVICE BOX "Loomex" clamps. Intermediate depth. Nongangable. For the installation of devices between studs in closed wall applications. Their specially designed brackets provide a safe installation. Pivoting ends for rework installation. Max. wall thickness : 1-1/8". (Patented) 2-1/4" deep. 3" x 2". 11 cu. in. Sku 90506-83, Model 777-LRB-CRT, $8.29 each

	DEVICE BOX "Loomex" clamps. Intermediate depth. Gangable. Used for switch and receptacle installation in walls made of 2 x 3 or 2 x 4 studs. Models 3104 and 1804 are recommended for thermostat installation. Positioning tabs. Provision for external nailing. Bulged sides for added capacity. (Patented) 2-1/2" deep. 3" x 2". 16 cu. in. Sku 90502-20, Model 3104-LH-CRT, $4.79 each

	"FSE" PLASTIC BOX Plastic; will not rust or corrode. Non conductive. 1" Sku 90557-32, Model FSEB-100, $6.99 each

	DEVICE BOX "Loomex" clamps. Intermediate depth. Gangable. With flush ears. Used for switch and receptacle installation in walls made of 2 x 3 or 2 x 4 studs. 2-1/2" deep. 3" x 2". 12.5 cu. in. Sku 90502-53, Model 1104-L-CRT, $2.99 each

	DEVICE BOX "Loomex" clamps. Shallow depth. Gangable. Without flush ears. Mainly used for receptacle installation in end of run or in confined areas such as walls made of 2 x 2 studs. 1-1/2" depth. Dimensions: 3" x 2". 8 cu. in. Sku 90502-04, Model 1100-LLE-CRT, $3.79 each

	DEVICE BOX "Loomex" clamps. Intermediate depth. Gangable. Without flush ears. Used for switch and receptacle installation in walls made of 2 x 3 or 2 x 4 studs. Positioning tabs. Provision for external nailing. Two embossed mounting slots for internal screw installation. (Patented). 2-1/2" deep. Dimensions: 3" x 2". 12.5 cu. in. Sku 90502-87, Model 1104-LHT-CRT, $1.89 each

	DEVICE BOX "BX" clamps. Intermediate depth. Gangable. Recommended when using armoured cable or flexible conduit. They are mainly used in apartment and commercial buildings. Positioning tabs. Provision for external nailing. Two embossed mounting slots for internal screw installation. (Patented). 2-1/2" deep. 3" x 2". 12.5cu. in. Sku 90502-46, Model 1104-LHA-CRT, $4.79 each

	REWORK DEVICE BOX "Loomex" clamps. Intermediate depth. Nongangable. For the installation of devices between studs in closed wall applications. Their specially designed brackets provide a safe installation. Rework bracket for closed wall applications. Max. wall thickness: 1". 2-1/2" deep. Dimensions: 3" x 2". 12.5 cu. in. Sku 90503-37, Model 1104-LRW-CRT, $5.99 each

	DEVICE BOX With conduit KO's. Intermediate depth. Gangable. Mainly used in commercial applications, using EMT or rigid conduit. They can also be used for "Loomex" and "BX" cables, using proper connectors. Recessed ears. 2-1/2" deep. Dimensions: 3" x 2". 12.5 cu. in. Sku 90501-70, Model 1104-CRT, $3.29 each

	DEVICE BOX "Loomex" clamps. Intermediate depth. Nongangable. 1 group. Less ears. Holding prongs and prepositioned depth tabs on one side. 2-1/2" deep. Dimensions: 3" x 2". 12.5 cu. in. Sku 90503-03, Model 2104-LLE-CRT, $1.49 each

	DEVICE BOX "Loomex" clamps. Intermediate depth. Nongangable. 2 groups. Less ears. Holding prongs and prepositioned depth tabs on one side. 2-1/2" deep. Dimensions: 3" x 2". 12.5 cu. in. Sku 90504-69, Model 2104-LLE-2-CRT, $4.29 each

	DEVICE BOX "Loomex" clamps. Intermediate depth. Nongangable. 3 groups. Less ears. Holding prongs and prepositioned depth tabs on one side. 2-1/2" deep. Dimensions: 3" x 2". 12.5 cu. in. Sku 90504-77, Model 2104-LLE-3-CRT, $7.49 each

	DEVICE BOX "Loomex" clamps. Intermediate depth. Nongangable. Staked nails. Holding prongs and prepositioned depth tabs on one side. 2-1/2" deep. Dimensions: 3" x 2". 12.5 cu in. Sku 90503-45, Model 2104-LN-CRT, $3.29 each

	ELECTRICAL BOX For the installation of switches and receptacles on surfaces which are permanently exposed i.e. basements, garages, etc. Rounded corners for extra safety. 4'' high x 2-3/8'' wide x 1-7/8'' deep. - Sku 90500-97, Model 1110-CRT, $2.79 each 4'' high x 2-1/8'' wide x 1-7/8'' deep. - Sku 11044-13, Model 2020-CRT, $2.79 each

	SQUARE BOX Outlet box used for light fixture installation or as a junction box. 30 cubic inch capacity. 4'' square, 2-1/8'' deep, ten 1/2'' side and 3/4'' concentric conduit knockouts. Sku 90503-94, Model 52171K-CRT, $5.29 each

	SQUARE BOX Square outlet box for installing the special receptacles for kitchen stoves and clothes dryers. Can be surface mounted. 10 - 1/2'' and 6 - 3/4'' side knockouts 5 - 1/2'' and 2 - 3/4'' bottom knock-outs. Blank cover. 4-11/16'' square, 2-1/8'' deep - 42 cubic inches. Sku 90503-86, Model 72171K-CRT, $6.29 each

	OCTAGONAL OUTLET BOX Octagon. Used primarily for light fixtures in ceilings. Also used as a junction box to split one power source into two or more circuits. Four pryouts and two 1/2'' and 3/4'' concentric conduit knockouts on sides one 1/2'' knockout on bottom. Less cable clamps. 4'' high x 4'' wide x 1-1/2'' deep. Sku 90505-01, Model 54151-CRT, $2.99 each

	OCTAGONAL ELECTRICAL BOX Often used for ceiling connections but also suitable as a junction box. Four pryouts and two 1/2'' knockouts on sides four pryouts and one 1/2'' knockout on bottom. 2 non-metal cable clamps. 4'' high x 4'' wide x 1-1/2'' deep. Sku 90505-50, Model 54151L-CRT, $2.29 each Sku 75596-93, Model 54151-L-VP, $8.29/pack of 4

	OUTLET METAL BOX Used primarily for BX Cable. Complete with clamps. 4''H x 4''W x 1-1/2''D. Sku 90507-09, Model 54151-LA-CRT, $5.29 each

	OCTAGONAL OUTLET BOX Ceiling Fan Box Supplied with 2 #10-32 machine screws and star washers. Ceiling fan may be mounted horizontally or with up to 30 degree inclination. 4" x 4" x 2 1/8" Sku 90507-90, Model CI-54171-LF, $6.49 each

	OCTAGONAL OUTLET BOX Primarily used for ceiling fixtures but may also be used as a junction box. Convenient stud bracket for easier installation and alignment. 4'' high x 4'' wide x 1-1/2'' deep. Sku 90505-76, Model 54151-LB-CRT, $3.79 each

	OCTAGONAL OUTLET BOX To provide a ceiling box where the wall board is already in place. Swing arms unfold behind the drywall to hold box in position. Not for use with heavy lamp fixtures weighing over 12 lbs. 4'' high x 4'' wide x 1-1/2'' deep. Sku 90505-27, Model 54151-LD-CRT, $7.99 each

	OCTAGONAL BOX EXTENSION Octagonal Box Extension Used to extend ceiling or wall mounted octagonal boxes, when dropping the ceiling or adding siding, etc. 4'' high x 4'' wide x 1-1/2'' deep. Sku 90505-92, Model 55151-K-CRT, $3.79 each

	CEILING BOX Attaches to the ceiling, through the drywall to the joist, without the need to cut a hole. 4'' round, 1/2'' deep. Four 1/2'' knockouts. Sku 90505-84, Model 56111-CRT, $3.79 each

	ELECTRICAL CONNECTOR BOX Ceiling box made of phenolic resin with all metal parts in galvanized steel. Accepts sheathed cables, up to #12 AWG. Prepushed knock outs. 2 connectors. 4" diam. x 19/16". No ears Sku 90504-02, Model 37155/700, $4.79 each

	HI-IMPACT PHENOLIC SWITCH AND OUTLET BOX Less ears, 1 connector. 2 gang type. Sku 90504-85, Model 37165/700, $4.79 each

	ROUND OUTLET BOX Round outlet box. Sturdy die cast aluminum alloy A380 construction. C/W mounting lugs, plugs and screws. White finish - Sku 90516-40, Model S110WHCN, $9.99 each Silver finish - Sku 90517-23, Model S110CN, $9.99 each

	SINGLE GANG RECTANGULAR BOX Single gang rectangular box. Sturdy die cast aluminum alloy A380 construction. C/W mounting lugs, plugs, and screws. Silver finish - Sku 90517-49, Model S100CN, $7.29 each White finish - Sku 90516-32, Model S100WHCN, $6.29 each

	BAR HANGER Adjustable from 16-1/2'' to 26-1/2''. Maximum load capacity: when extended up to 22-1/2'' - 50 lb, when extended up to 26-1/2'' - 25 lb. Sku 90514-34, Model BC-1042, $5.79 each

	SWITCH BOX STRAP For mounting an outlet box between studs. Will accommodate not only a single box but a 2, 3, 4 or 5 multiple boxes (ganged). 16" Sku 90514-42, Model CI-1060, $1.39 each

	ELECTRICAL BOX SUPPORT Supports "F" clips. Sku 90519-13, Model CI-820D, $0.49 each

	JUNCTION BOX - MOLDED PVC. Safe non-metallic. Will not rust or corrode. 4 x 4 x 2 - Sku 90557-81, Model E989NNJ, $12.49 each 4 x 4 x 4 - Sku 90557-99, Model E987NR, $11.99 each

	OCTAGONAL BOX PVC. 4 x 1-1/2'' (1/2 x 3/4 hub). Sku 90558-80, Model RJCB-075050, $6.79 each

	ELECTRICAL BOX - SINGLE 'NUTEK'. Single gang device box - plastic - Loomex Clamps. 18 cu inch capacity. Positioning tabs eliminate the need to measure for 1/2" drywall. 4 hinged cable entry tabs. Easy access to bottom-mounted ground screw. Internal screw bosses for all devices. 2-hour fire rated. 3.75" Sku 90578-78, Model WSW, $2.29 each

	FSE SWITCH BOX PVC durable, non-conducting, will not rust. Ideal for outdoor receptacles or switches when used with Kraloy weatherproof covers. For use with 3/4" or 1/2" PVC conduit. Sku 90557-40, Model FSEB-075050, $9.99 each

	FSC SWITCH BOX PVC durable, non-conducting, will not rust. Ideal for outdoor receptacles or switches when used with Kraloy weatherproof covers. For use with 3/4" or 1/2" PVC conduit. Sku 90553-85, Model FSCB-075050, $6.99 each

	FSS SWITCH BOX PVC durable, non-conducting, will not rust. Ideal for outdoor receptacles or switches when used with Kraloy weatherproof covers. For use with 3/4" or 1/2" PVC conduit. Sku 90553-93, Model FSSB-075050, $17.49 each

	DEVICE BOX Loomex clamps. Intermediate depth. Gangable. Positioning tabs. Provision for external nailing. Two embossed mounting slots for internal screw installation. (Patented.) 2 1/2" (6.35 cm) deep - 3" (7.62 cm) x 2" (5.08 cm) - 12.5 cu.in. 6 per package Sku 90532-24, Model 1104-LHT-VP, $9.79/pack of 6

	RECTANGULAR BOX FOR BX CLAMPS Intermediate, gangable. Recommended when using armoured cable or flexible conduit. They are used in apartment and commercial buildings. Flush ears. 2-1/2" deep - 3" x 2" - 12.5 cu. in. Sku 90513-43, Model 1104-LA-CRT, $3.79 each

	SQUARE JUNCTION BOX - 4" Used for multiple wire connections, using proper connectors, in commercial/industrial applications. Used with proper covers, they can also serve for device installations. Concentric knockouts (patented); 1-1/2" deep; 21 cu. in. Shallow box Sku 90514-26, Model 52151-K-CRT, $4.79 each

	DEVICE BOX "Loomex" clamps. Shallow. Gangable. With flush ears. Mainly used for receptacle installation in end of run or in confined areas such as walls made of 2 x 2 studs. Dimensions: 3" x 2". 1 1/2" deep, 8 po. cu. - Sku 90502-12, Model 1100-L-CRT, $3.79 each 2" deep, 10 po. cu. - Sku 90502-38, Model 1102-L-CRT, $4.79 each

	DEVICE BOX "Loomex" cable. Deep. Gangable. Flush ears. Deep device boxes, when wall depth allows, are ideal for thermostat and dimmer installation. They provide extra capacity when numerous cables are needed for the necessary connections. 3" deep. Dimensions: 3" x 2". 15 cu. in. Sku 90503-60, Model 1004-L-CRT, $6.79 each

	DEVICE BOX "Loomex" clamps. Shallow depth. Gangable. Without flush ears. Mainly used for receptacle installation in end of run or in confined areas such as walls made of 2 x 2 studs. Positioning tabs. Provision for external nailing. Two embossed mounting slots for internal screw installation. (Patented). 2" deep. Dimensions: 3" x 2". 10 cu. in. Sku 11043-97, Model 1102-LH-CRT, $4.79 each

	DEVICE BOX "Loomex" cable. Deep. Gangable. Without flush ears. Deep device boxes, when wall depth allows, are ideal for thermostat and dimmer installation. They provide extra capacity when numerous cables are needed for the necessary connections. With positioning tabs. Provision for external nailing. Two embossed mounting slots for internal screw installation. (Patented). 3" deep. Dimensions: 3" x 2". 15 cu. in. Sku 90500-63, Model 1004-LH-CRT, $4.79 each

	DEVICE BOX "BX" clamps. Intermediate depth. Gangable. Recommended when using armoured cable or flexible conduit. They are mainly used in apartment and commercial building. "Wraparound" bracket for 2-1/2" and 3-5/8" steel studs. With integral support bracket. Bulged sides for added capacity. (Patented). 2 1/2" deep - 3" x 2". 16 cu. in. Sku 12782-90, Model 3104-LSSAX-CRT, $6.29 each

	DEVICE BOX SUPPORT Rework devices box supports ("F" clips). They are used in pairs to install device boxes with ears, between studs in closed wall applications. 6/pack Sku 75599-90, Model 820DB6, $3.79/pack

	4" FLAT SINGLE DEVICE COVER 4" square box flat cover for 1 device. Made of steel to be use for concealed installation of devices into a 4" square junction box, when the finished wall will be made of drywall or plaster. Sku 75599-82, Model BC52-C-0, $2.49 each

	4" FLAT 2 DEVICES COVER 4" square box flat cover for 2 devices. Made of steel to be use for concealed installation of devices into a 4" square junction box, when the finished wall will be made of drywall or plaster. Sku 75596-69, Model BC52-C-00, $3.29 each

[ Home ] [ Up ]

We welcome all inquiries on our products. Please use Feedback form to contact us.

Please note that all prices in all categories are listed in Canadian Dollars. All items are subject to 15% Harmonized Sales Tax (HST) when shipped to Nova Scotia, 14% Harmonized Sales Tax (HST) when shipped to Prince Edward Island, 13% Harmonized Sales Tax (HST) when shipped to New Brunswick, Newfoundland or Ontario. All other provinces/territories are subject to 5% Goods and Service Tax (GST). International and United States sales are tax exempt (duty and brokerage fees, if applicable, are the responsibility of the purchaser).
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted). Not all items can be shipped due to weight and size factors. Items marked free shipping are for within Canada and the USA (with the exception of remote locations)). We do not ship chemical products or insecticides. All prices subject to change without notice. Not all items may be available at all times. We reserve the right to choose our customers and to limit quantities if needed. Website is also subject to error. If a pricing error is discovered it will be fixed, however we are not obliged to sell for the error. Website pricing may differ from in-store pricing.

We accept VISA, Mastercard or American Express. You can also send a money order or check, in which case we will wait for it to clear prior to shipping out the goods. In some cases, Paypal will be used as a payment method.

Copyright © 2013 UJ Robichaud TIMBR Mart. Last modified: 05/04/13