STEEL AND WOOD DRILL BIT SET Titanium
series. Highest quality high speed steel drill bits with titanium nitrate
coating, increases drill bit life 6 times. Drills most ferrous and non
ferrous metals such as: mild steel, sheet metal, iron castings, brass,
copper, aluminum. Perfectly centered split point tip. 3/8" reduced shank.
Durable metal case to store and protect drill bits. 29 pieces. 1/16"
- 1/2", 16ths
Sku 12369-75, Model KDB-29T, $29.99/set
Buy Now!
FORSTNER WOOD BIT - 7PC Premium
quality high speed steel bits. Titanium coating for longer edge life. Comes
complete in durable moulded storage case to protect the bits. Bit sizes are:
1/4" - 3/8" - 1/2" - 5/8" - 3/4" - 7/8" and 1".
Sku 12331-05, Model KFB-7T, $14.99/set
Buy Now!
DRILL BIT & ACCESSORY KIT - 300 PCS. 5-pc.
hole saw set; 116 high-speed steel drill bits; 88 screwdriver bits; 42
woodworking drill bits; 10 nut drivers for fastening and loosening nuts; 24
carbide-tipped masonry drill bits; 15 assorted accessories including
screwdriver bit holder, countersink, drill stoppers, hex. key wrench, drill
gauge, center punch, cupped nail punch set and screw finders.
Sku 12659-25, Model KDB300K, $59.99/set
Buy Now!
135° SPLIT POINT TITANIUM DRILL BIT "FULLER
PRO-POINT". Grounded. The titanium nitride coating on these Pro-Point drill
bits offers improved wear resistance which results in a easier drilling and
longer life of the drill bit. Side tapers ensure accurate and smooth holes.
Large flute chambers prevent clogging. Titanium nitride coating lasts up to
6 times longer than normal HSS drill bits. 135° split point drill tip for
fast and efficient penetration of work surface.
1/16" - Sku 10798-13, Model 800-4050, $1.49 each
5/64" - Sku 10798-21, Model 800-4051, $1.79 each
3/32" - Sku 10798-54, Model 800-4052, $1.69 each
7/64" - Sku 10798-62, Model 800-4053, $1.69 each
1/8" - Sku 10798-88, Model 800-4054, $2.49 each
9/64" - Sku 10799-04, Model 800-4055, $2.49 each
5/32" - Sku 10799-46, Model 800-4056, $2.49 each
11/64" - Sku 10800-27, Model 800-4057, $2.79 each
3/16" - Sku 10800-35, Model 800-4058, $2.99 each
13/64" - Sku 10800-43, Model 800-4059, $2.99 each
7/32" - Sku 10800-50, Model 800-4060, $3.49 each
15/64" - Sku 10800-68, Model 800-4061, $3.29 each
1/4" - Sku 10800-76, Model 800-4062, $3.49 each
9/32" - Sku 10800-84, Model 800-4064, $4.49 each
5/16" - Sku 10800-92, Model 800-4066, $5.49 each
11/32" - Sku 10801-00, Model 800-4068, $6.79 each
3/8" - Sku 12362-31, Model 800-4070, $6.99 each
13/32" - Sku 10801-26, Model 800-4072, $8.79 each
7/16" - Sku 10801-34, Model 800-4074, $10.99 each
15/32" - Sku 10801-59, Model 800-4076, $11.99 each
1/2" - Sku 10801-67, Model 800-4078, $14.49 each
SPLIT POINT COBALT DRILL BIT - 135° "FULLER
PRO-POINT". Grounded. The cobalt composition makes this drill bit suited for
drilling into hard abrasives surfaces such as stainless steel and other
applications where high drilling heats occur. Side tapers ensure accurate
and smooth holes. Large flute chambers prevent clogging. Cobalt composition
designed to withstand high drilling heats. 135° split point drill for fast
and efficient penetration of work surface. 1/16" - Sku 10801-83, Model 800-5050, $1.69 each
5/64" - Sku 10801-91, Model 800-5051, $2.29 each
3/32" - Sku 10802-25, Model 800-5052, $2.29 each
7/64" - Sku 10802-41, Model 800-5053, $2.49 each
1/8" - Sku 10802-58, Model 800-5054, $2.99 each
9/64" - Sku 10802-66, Model 800-5055, $2.99 each
5/32" - Sku 10802-90, Model 800-5056, $3.29 each
11/64" - Sku 74222-72, Model 800-5057, $2.99 each
3/16" - Sku 10803-32, Model 800-5058, $3.29 each
13/64" - Sku 10803-57, Model 800-5059, $3.49 each
7/32" - Sku 10803-99, Model 800-5060, $3.49 each
15/64" - Sku 10804-07, Model 800-5061, $3.99 each
1/4" - Sku 10804-15, Model 800-5062, $4.79 each
17/64" - Sku 10804-23, Model 800-5063, $5.79 each
9/32" - Sku 10804-31, Model 800-5064, $5.79 each
19/64" - Sku 10804-49, Model 800-5065, $6.49 each
5/16" - Sku 10804-56, Model 800-5066, $7.79 each
21/64" - Sku 10804-64, Model 800-5067, $8.29 each
11/32" - Sku 10804-72, Model 800-5068, $9.29 each
23/64" - Sku 10804-80, Model 800-5069, $9.29 each
3/8" - Sku 10804-98, Model 800-5070, $10.49 each
25/64" - Sku 10805-06, Model 800-5071, $11.99 each
13/32" - Sku 10805-14, Model 800-5072, $12.99 each
27/64" - Sku 10805-22, Model 800-5703, $15.99 each
7/16" - Sku 10805-30, Model 800-5074, $15.99 each
29/64" - Sku 10805-48, Model 800-5075, $16.99 each
15/32" - Sku 10805-55, Model 800-5076, $16.99 each
31/64" - Sku 10805-63, Model 800-5077, $17.99 each
1/2" - Sku 10806-47, Model 800-5078, $19.49 each
HIGH SPEED DRILL BIT Made from
high speed M2 steel. Black oxide finish with polished margins and tips for
ease of use and continuous chip flow. For use and continuous chip flow. For
use in drilling both hard materials such as sheet metal, steel castings and
mild steel as well as soft materials like wood, wallboard and plaster.
1/16" - Sku 11330-08, Model 800-2904, $1.39/pack of 2
5/64" - Sku 11330-40, Model 800-2905, $1.49/pack of 2
3/32" - Sku 11330-81, Model 800-2906, $1.59/pack of 2
7/64" - Sku 11331-15, Model 800-2907, $1.59/pack of 2
1/8" - Sku 11331-64, Model 800-2908, $1.59/pack of 2
9/64" - Sku 11332-14, Model 800-2909, $1.69/pack of 2
5/32" - Sku 11332-63, Model 800-2910, $1.69/pack of 2
11/64" - Sku 11333-21, Model 800-2911, $1.89/pack of 2
3/16" - Sku 11333-70, Model 800-2912, $1.39 each
13/64" - Sku 11334-20, Model 800-2913, $1.39 each
7/32" - Sku 11334-87, Model 800-2914, $1.59 each
15/64" - Sku 11335-37, Model 800-2915, $1.59 each
1/4" - Sku 11335-94, Model 800-2916, $1.79 each
17/64" - Sku 11336-02, Model 800-2917, $1.99 each
9/32" - Sku 11336-51, Model 800-2918, $2.49 each
19/64" - Sku 11336-69, Model 800-2919, $2.99 each
5/16" - Sku 11337-01, Model 800-2920, $2.99 each
21/64" - Sku 11337-19, Model 800-2921, $2.99 each
11/32" - Sku 11337-50, Model 800-2922, $3.49 each
23/64" - Sku 11337-68, Model 800-2923, $3.79 each
3/8" - Sku 11338-18, Model 800-2924, $3.99 each
1/8" stubby - Sku 10815-38, Model 800-2978, $2.79 each
HIGH SPEED DRILL BIT Made from
high speed M2 steel. Black oxide finish with polished margins and tips for
ease of use and continuous chip flow. For use in drilling both hard
materials such as sheet metal, steel castings and mild steel as well as soft
materials like wood, wallboard and plaster. 3/8" reduced shank
25/64" - Sku 11338-26, Model 800-3125, $4.79 each
13/32" - Sku 11338-67, Model 800-3126, $4.99 each
27/64" - Sku 11338-75, Model 800-3127, $4.99 each
7/16" - Sku 11339-17, Model 800-3128, $5.79 each
29/64" - Sku 11339-25, Model 800-3129, $5.99 each
15/32" - Sku 11339-74, Model 800-3130, $6.49 each
31/64" - Sku 11339-82, Model 800-3131, $6.29 each
1/2" - Sku 11340-55, Model 800-3132, $7.49 each
MASONRY DRILL BIT SET 5 Piece
Set. Contains 1 each of 1/8, 3/16, 1/4, 5/16, 3/8.
Sku 11388-17, Model 806-0027, $6.99/pack
MASONRY DRILL BIT Fuller
Fast spiral flutes clear dust and chips quickly. Tungsten carbide tips for
fast penetration. Heat-treated steel for long life performance.
1/8" x 1/8" x 3" - Sku 11387-18, Model 805-0018, $1.49 each
3/16" x 3/16" x 3 1/2" - Sku 11387-26, Model 805-0020, $1.69 each
1/4" x 1/4" x 4" - Sku 11387-42, Model 805-0021, $1.99 each
5/16" x 1/4" x 4" - Sku 11387-59, Model 805-0022, $2.49 each
3/8" x 1/4" x 4" - Sku 11387-67, Model 805-0023, $2.49 each
1/2" x 3/8" x 6" - Sku 11387-75, Model 805-0024, $3.49 each
5/8" x 3/8" x 6" - Sku 11387-91, Model 805-0025, $4.29 each
5/8" x 3/4" x 6" - Sku 11388-09, Model 805-0026, $6.29 each
LONG MASONRY DRILL BIT 400mm.
Chrome plated. Extra heavy carbide tip. Suitable for hammer drilling
individually pouched. 15 3/4" long
5/16" x 1/4" - Sku 10790-94, Model 805-1911, $8.29 each
3/8" x 3/8" - Sku 10791-02, Model 805-1912, $10.49 each
1/2" x 3/8" - Sku 10791-10, Model 805-1913, $11.49 each
9/16" x 3/8" - Sku 10791-28, Model 805-1914, $14.49 each
5/8" x 3/8" - Sku 10791-36, Model 805-1915, $14.49 each
3/4" x 3/8" - Sku 10791-44, Model 805-1916, $17.99 each
7/8" x 3/8" - Sku 74223-55, Model 805-1917, $19.99 each
1" x 3/8" - Sku 10791-69, Model 805-1918, $23.99 each
"FULLER PRO" MASONRY DRILL BIT Suitable
for rotary and hammer drills. Designed for use in dry concrete, brick and
tile. Fulle Pro masonry drill bits are specifically designed for heavy duty
use. Special grade tungstene carbide tip for better wear resistance. Wide
spiral flutes will not clog during use. Ground from solid to withstand heavy
duty application. 120° tip for faster penetration. High temperature brazing
for long life performance.
1/8" x 1/8" x 2 1/2" - Sku 10807-53, Model 805-3010, $1.79 each
3/16" x 3/16" x 3 1/3" - Sku 10807-61, Model 805-3012, $1.99 each
1/4" x 1/4" x 6" - Sku 10807-79, Model 805-3014, $2.49 each
5/16" x 1/4" x 6" - Sku 10807-87, Model 805-3016, $2.79 each
3/8" x 3/8" x 6" - Sku 10807-95, Model 805-3018, $3.29 each
1/2" x 3/8" x 6" - Sku 10808-03, Model 805-3020, $4.49 each
5/8" x 3/8" x 6" - Sku 10808-11, Model 805-3022, $4.79 each
5/32" x 3/8" x 5 1/2" - Sku 74224-39, Model 805-3031, $3.79 each
GLASS AND TILE DRILL BIT Fuller
Edges diamond-wheel sharpened for improved performance. Spear point tips
produce perfectly round holes in glass or tile, without chipping or
breaking. Special carbide tip for long life performance. Zinc plated for
wear-resistant appearance.
1/8" - Sku 12305-15, Model 807-1005, $4.99 each
3/16" - Sku 12305-31, Model 807-1007, $5.29 each
1/4" - Sku 12305-56, Model 807-1009, $5.79 each
5/16" - Sku 12305-72, Model 807-1011, $6.49 each
3/8" - Sku 12305-98, Model 807-1013, $7.79 each
1/2" - Sku 10803-40, Model 807-1015, $8.29 each
WOOD DRILL BIT Fast
cutting, extra sharp, no slip shank, rust resistant.
1/4" - Sku 11300-20, Model 810-8504, $2.49 each
5/16" - Sku 11300-38, Model 810-8505, $2.49 each
3/8" - Sku 11300-53, Model 810-8506, $2.49 each
7/16" - Sku 11300-61, Model 810-8507, $2.79 each
1/2" - Sku 11300-87, Model 810-8508, $2.79 each
9/16" - Sku 11300-95, Model 810-8509, $2.79 each
5/8" - Sku 11301-11, Model 810-8510, $2.79 each
11/16" - Sku 11301-29, Model 810-8511, $3.29 each
3/4" - Sku 11301-37, Model 810-8512, $3.29 each
13/16" - Sku 11301-52, Model 810-8513, $3.79 each
7/8" - Sku 11301-60, Model 810-8514, $3.79 each
15/16" - Sku 11301-78, Model 810-8515, $3.79 each
1" - Sku 11301-86, Model 810-8516, $3.99 each
1 1/8" - Sku 11302-02, Model 810-8518, $5.29 each
1 1/4" - Sku 11302-10, Model 810-8520, $4.99 each
1 3/8" - Sku 11302-28, Model 810-8522, $5.29 each
1 1/2" - Sku 11302-36, Model 810-8524, $5.29 each
DRILL BIT SET 13 PC
drill bit set. Comes in a clear top step case. Content includes- 1/16",
5/64", 3/32", 7/64", 1/8', 9/64", 5/32", 11/64", 3/16", 13/64", 7/32",
15/64", 1/4".
Titanium - Sku 12368-43, Model 801-4113, $13.99/set
High Speed Steel - Sku 12360-58, Model 801-3613, $9.99/set
DRILL BIT SET 21 pc
drill bit set. Comes in a clear top step case. Content includes- 1/16",
5/64", 3/32", 7/64", 1/8', 9/64", 5/32", 11/64", 3/16", 13/64", 7/32",
15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8".
Titanium - Sku 12368-68, Model 801-4121, $30.99/set
High Speed Steel - Sku 12368-01, Model 801-3621, $17.99/set
WOOD BIT EXTENSION Complete
with hex key and quick-release screw attachment. For all bits with 1/4"
shanks. Carded. 12"
Sku 11302-44, Model 810-8530, $9.79 each
WOOD BIT EXTENSION "SPEEDBOR" Adds
extra reach to wood boring bit. Extension head will follow 5/8" and larger
bits through hole. Two set screws secure bit into extension. 1/8" hex key
included with extension. Not for use with quick change woodboring bits.
6" - Sku 11311-01, Model 88702, $6.79 each
12" - Sku 11311-19, Model 88601, $8.29 each
DOWEL KIT Each kit
contains: 1 wood drill bit, dowel centers, rubber depth stops, fluted
dowels. center set, fluted dowels.
1/4" - Sku 11014-27, Model 2936, $8.29/pack
5/16" - Sku 11012-37, Model 2937, $9.29/pack
3/8" - Sku 11012-45, Model 2938, $10.49/pack
POWER SHIP AUGER BIT For fast
hole boring in wood. Fully heat treated and tempered. Screw point design
provides faster boring action. Hex shank eliminates slippage in chuck. For
deep wood boring in large timber, decks, telephone and power poles,
landscape timbers. Heavy duty design bores through nail-embedded timbers.
For electricians, plumbers, exterminators and woodworkers. 1 per card.
3/8", Hex Shank 5/16", 17"L - Sku 12340-04, Model 235071, $16.99 each
1/2", Hex Shank 5/16", 17"L - Sku 12340-20, Model 235231, $16.99 each
3/4", Hex Shank 7/16", 17"L - Sku 12340-46, Model 235741, $27.99 each
1", Hex Shank 7/16", 17"L - Sku 12340-61, Model 236121, $38.99 each
1 1/4", Hex Shank 7/16", 18"L - Sku 12340-95, Model 236391, $52.99 each
DOUBLE ENDED DRILL BIT - STUBBY 2 Per
Card. HSS Double-Ended Split Point. Fractional and wire gauge sizes. 135
Deg. split points eliminate need for center punch. Well suited for drilling
sheet metal and aluminum. Not recommended for stainless steel. Surface
treated for extended service life. 1/8"
Sku 12360-25, Model 368621, $2.29/pack
"BIT BULL" DRILL ACCESSORIES Includes
100 pieces. Makes jobs easier with the world's only magnetic storage and
handling system for power tool accessories. Completely modular award-winning
design. Removable tool trays go anywhere you need them. Easy out / easy in /
easy on your fingers.
Sku 11333-39, Model 880480, $64.99/set
DRILL BIT KIT - 90 PCS Makes
jobs easier with the world's only magnetic storage and handling system for
power tool accessories. Completely modular award-winning design. Removable
tool trays go anywhere you need them. Easy out / easy in / easy on your
fingers.
Sku 11333-13, Model 880130, $64.99/set
SERIE 5000 DRILL BIT Carbide.
Shank of 8 mm. 60mm L, 35mm D
Sku 11889-60, Model 5035TCT, $34.99 each
SERIE 5000 DRILL BIT Treated
steel. Shank of 8 mm. 60mm L, 35mm D
Sku 11889-78, Model 5535SP, $20.99 each
TRUFIT DRILL BIT For
faster, stronger, wood construction. Designed for use with Miller dowels.
Metal.
Mini-X, 1
5/8" x 0.25" - Sku 12866-65, Model QD8C65, $16.99 each
1X, 2
3/4" x 0.25" - Sku 12866-40, Model QD12D11, $24.99 each
2X, 3
1/2" x 0.50" - Sku 12866-57, Model QD15D14, $32.99 each
BRAD POINT DRILL BIT
Precision-ground for use in doweling when exact hole sizes are required.
Combination of cutting edges and spurs reduce splintering and provide
smooth, clean hole. For use in furniture making, doweling cabinetry and many
other fine woodworking applications. Made of chrome vanadium steel.
Heat-treated for extra sharpness and longest life. Wide flutes provide fast,
continuous flow of chips.
1/8" - Sku 12303-25, Model 49612, $4.29 each
3/16" - Sku 12304-40, Model 49613, $4.79 each
1/4" - Sku 12303-33, Model 49614, $4.99 each
5/16" - Sku 12303-41, Model 49615, $5.79 each
3/8" - Sku 12303-58, Model 49616, $6.79 each
1/2" - Sku 12303-74, Model 49618, $9.79 each
7/16" - Sku 11166-49, Model 49617, $9.79 each
SPEEDBOR LOCK-N-LOAD WOOD BORING BITS
Lock-N-Load shank fits all drills and 1/4" quick change holders flat bit in
the world. Carded.
1/4" - Sku 11300-12, Model 90304, $4.79 each
5/16" - Sku 11300-46, Model 90305, $4.79 each
3/8" - Sku 11300-79, Model 90306, $4.79 each
7/16" - Sku 11301-03, Model 90307, $4.79 each
1/2" - Sku 11301-45, Model 90308, $4.79 each
9/16" - Sku 11301-94, Model 90309, $4.99 each
5/8" - Sku 11302-51, Model 90310, $5.49 each
11/16" - Sku 11302-93, Model 90311, $5.49 each
3/4" - Sku 11303-43, Model 90312, $5.49 each
13/16" - Sku 11303-84, Model 88805, $5.49 each
7/8" - Sku 11304-26, Model 90314, $5.49 each
15/16" - Sku 11304-67, Model 90315, $5.99 each
1" - Sku 11305-17, Model 90316, $5.99 each
1 1/8" - Sku 11306-57, Model 90318, $8.29 each
1 1/4" - Sku 11307-56, Model 90320, $8.29 each
1 3/8" - Sku 11308-06, Model 90322, $8.29 each
1 1/2" - Sku 11308-55, Model 90324, $8.29 each
"SPEEDBOR 2000" 6-PIECE SET 'SPEEDBOR'
2000 For the do-it-yourselfer or professional. Set includes: 3/8'', 1/2'',
5/8'', 3/4'', 7/8'' and 1'' sizes. Speedbor 2000 bores two times faster,
lasts three times longer than any other flat bit in the world. Micro-groove
point for fast starts positive cutting action. Extended spurs for faster,
cleaner boring action. 1 piece forged steel, heat treated full-length for
extra overall strength.
Sku 11309-21, Model 88899, $22.99/pack
"SPEEDBOR 2000" EXTRA LONG DRILL BIT 'SPEEDBOR'
2000 - XL OPEN STOCK - IRWIN Extra Long Exclusive Micro Groove point bores
faster, cleaner, deeper holes than ever before. Ideal for boring straight
and angled holes in hard and soft woods. 16'' long in 3/8'', Use in electric
drills. Pouched.
3/8" - Sku 11304-00, Model 88706, $13.49 each
1/2" - Sku 11304-18, Model 88708, $13.99 each
5/8" - Sku 11304-34, Model 88710, $14.99 each
3/4" - Sku 11304-42, Model 88712, $15.49 each
7/8" - Sku 11304-59, Model 88714, $15.99 each
1" - Sku 11304-75, Model 88716, $16.99 each
"DUAL-AUGER" WOOD BIT IRWIN -
I-100 SERIES Perfectly true concentric twist assures smooth, continuous flow
of chips, with no run-out or wobble. Single cutter and spur design and
specially designed screw point for faster, cleaner boring in all types of
hardwood. For use in hand or 3/8'' and larger electric drills. 7-1/2''
length. 3/8" hex shank
1/4" - Sku 12333-29, Model 49904, $14.99 each
5/16" - Sku 12333-45, Model 49905, $14.99 each
3/8" - Sku 12333-60, Model 49906, $14.99 each
7/16" - Sku 12333-86, Model 49907, $14.99 each
1/2" - Sku 12334-02, Model 49908, $15.49 each
9/16" - Sku 12334-28, Model 49909, $15.49 each
5/8" - Sku 12334-44, Model 49910, $15.49 each
11/16" - Sku 12334-69, Model 49911, $15.49 each
3/4" - Sku 12334-85, Model 49912, $16.49 each
13/16" - Sku 12335-01, Model 49913, $17.99 each
7/8" - Sku 12335-27, Model 49914, $18.99 each
15/16" - Sku 12335-43, Model 49915, $20.99 each
1" - Sku 12335-68, Model 49916, $20.99 each
1 1/8" (1/2" hex shank) - Sku 12333-03, Model 49918, $24.99 each
1 1/4" (1/2" hex shank) - Sku 12333-37, Model 49920, $25.99 each
INSTALLER DRILL BIT 'IRWIN'
Run wires anywhere in your home. Drill wood, plaster and metal lath. Holes
in head makes it easy to pull wires through walls, ceilings and floors. 18''
long featuring 1/4'', 5/16'', 3/8'', 1/2'' and 3/4" sizes. Use in electric
drills. Pouched.
1/4" - Sku 11323-49, Model 39104, $16.49 each
5/16" - Sku 11323-56, Model 39105, $18.49 each
3/8" - Sku 11323-64, Model 39106, $18.99 each
1/2" - Sku 11323-80, Model 39108, $21.99 each
3/4" - Sku 11323-23, Model 39112, $30.99 each
POWER SHIP AUGER BIT IRWIN For
use in drilling applications where small nails and other foreign materials
may be encountered. Single twist type with single cutter and side lip.
Hollow center twist design for fast, continuous flow of chips. Medium-fast
screw pitch. Heat-treated full length. Guaranteed consistent Rockwell
hardness. Cutting head can be sharpened time and again for quick clean
boring and longer life. For deep boring work in large timber, telephone and
power poles, on docks and bridges, in mining and heavy construction. Length
of 17''
3/8" - Sku 12302-59, Model 47406, $30.99 each
1/2" - Sku 12302-67, Model 47408, $31.99 each
5/8" - Sku 12302-75, Model 47410, $33.99 each
3/4" - Sku 12302-83, Model 47412, $38.99 each
7/8" - Sku 12302-91, Model 47414, $44.99 each
1" - Sku 12303-82, Model 47416, $47.99 each
1 1/8" - Sku 12303-17, Model 47418, $57.99 each
1 1/4" - Sku 12332-79, Model 47420, $67.99 each
1 3/8" - Sku 12332-95, Model 47422, $77.99 each
1 1/2" - Sku 12333-11, Model 47424, $82.99 each
"UNIBIT" DRILL BIT - STEP 'UNIBIT'
new way to drill holes. No center punching required. Up to 13 different hole
sizes with one bit. Perfectly round holes in metal, wood, plastics and other
thin materials. Fast, sure starts even on curved surfaces. UNIBIT 1 Hole
sizes 13. 1/8'' to 1/2'' diameter in 1/32'' increments. Step thickness:
1/8'' with shank size of 1/4''. Perfect all-around bit for most common
drilling jobs. #1
Sku 12300-51, Model 10231, $28.99 each
"UNIBIT" DRILL BIT 'UNIBIT'
Hole sizes 6. 3/16'' to 1/2'' diameter in 1/16'' increments. Step thickness:
3/8'' with shank size of 1/4''. Ideally suited for drilling standard hole
sizes in materials up to 3/8'' thick. #2
Sku 12300-69, Model 10232, $29.99 each
"UNIBIT" DRILL BIT - STEP 'UNIBIT'
Hole sizes 9. 1/4'' to 3/4'' diameter in 1/16'' increments. Step thickness:
1/8'' with shank size of 3/8''. Good choice for cutting medium size holes
quickly and easily. #3
Sku 12300-77, Model 10233, $52.99 each
AUGER BIT SET Heat
treated full length. Coarse screw point for fast boring in all types of
wood. 7-1/2" overall length - can bore through up to 3 studs. Set includes
1/4, 3/8 and 1/2" sizes.
Sku 12333-78, Model 49999, $32.99/set
HEX SHANK DRILL BIT SET Fits all
cordless drills, screwguns and screwdrivers. 1/4'' hex shank for fast bit
changes. Bit sizes clearly marked on hex shanks. Includes most popular drill
bit sizes. 5-pieces set includes sizes: 3/32, 7/64, 1/8, 9/64, 5/32.
Sku 12302-00, Model 13135, $15.99/set
"SIDEWINDER" DRILL BIT Features
a speed helix design that penetrates wood, metal and plastic three times
faster than standard high speed steel drill bits. Bits feature a 135-degree
split point that starts cutting immediately upon contact - no centre punch
required.
1/16" - Sku 11328-28, Model 12146, $2.49/pack of 2
5/64" - Sku 11328-36, Model 12147, $2.79/pack of 2
3/32" - Sku 11328-44, Model 12148, $2.99/pack of 2
7/64" - Sku 11328-51, Model 12149, $3.79/pack of 2
1/8" - Sku 11328-69, Model 12150, $4.29/pack of 2
9/64" - Sku 11328-77, Model 12159, $2.99 each
5/32" - Sku 11328-85, Model 12160, $2.99 each
11/64" - Sku 11329-19, Model 12161, $3.29 each
3/16" - Sku 11329-01, Model 12162, $3.29 each
13/64" - Sku 11329-19, Model 12163, $3.99 each
7/32" - Sku 11329-27, Model 12164, $4.29 each
15/64" - Sku 11329-35, Model 12165, $4.29 each
1/4" - Sku 11329-43, Model 12166, $4.29 each
5/16" - Sku 11329-60, Model 12170, $6.99 each
3/8" - Sku 11329-92, Model 12174, $9.79 each
13/32" - Sku 11332-30, Model 12176, $11.49 each
7/16" - Sku 11332-48, Model 12178, $12.99 each
15/32" - Sku 11332-55, Model 12180, $14.49 each
1/2" - Sku 11332-71, Model 12182, $16.49 each
PRECISION GROUND HSS DRILL BIT Jobber
length. For drilling steel, wood and plastic. Precision ground from premium
high speed steel. Hardened and tempered for long life and high performance.
118 deg. point for general-purpose drilling applications.
1/16" - Sku 11347-66, Model 10192, $2.29/pack of 2
5/64" - Sku 11348-08, Model 10193, $2.29/pack of 2
3/32" - Sku 11348-57, Model 10194, $2.49/pack of 2
7/64" - Sku 11349-15, Model 10195, $2.49/pack of 2
1/8" - Sku 11349-72, Model 10196, $2.49/pack of 2
9/64" - Sku 11350-52, Model 10209, $2.29 each
5/32" - Sku 11351-02, Model 10210, $2.29 each
11/64" - Sku 11326-04, Model 10211, $2.49 each
3/16" - Sku 11352-27, Model 10212, $2.49 each
13/64" - Sku 11326-12, Model 10213, $2.79 each
7/32" - Sku 11326-20, Model 10214, $2.79 each
15/64" - Sku 11326-38, Model 10215, $3.29 each
1/4" - Sku 11354-58, Model 10216, $3.29 each
17/64" - Sku 11347-09, Model 10217, $3.49 each
9/32" - 11325-13, Model 10218, $3.79 each
19/64" - Sku 11347-25, Model 10219, $4.29 each
5/16" - Sku 11325-21, Model 10220, $4.49 each
21/64" - Sku 11347-41, Model 10221, $4.79 each
11/32" - Sku 11325-39, Model 10222, $5.29 each
23/64" - Sku 11347-74, Model 10223, $5.79 each
3/8" - Sku 11325-47, Model 10224, $6.29 each
HSS STEEL DRILL BIT 3/8"
shank. Specially designed to fit drills with chucks 3/8'' and larger. 118
Deg. point for general-purpose drilling. Ideal for steel, wood and plastic.
25/64" - Sku 11347-90, Model 10481, $8.29 each
13/32" - Sku 11325-54, Model 10482, $8.29 each
27/64" - Sku 11342-04, Model 10483, $8.29 each
7/16" - Sku 11325-62, Model 10484, $8.79 each
29/64" - Sku 11346-59, Model 10485, $8.79 each
15/32" - Sku 11325-70, Model 10486, $9.29 each
31/64" - Sku 11346-83, Model 10487, $10.49 each
1/2" - Sku 11325-88, Model 10488, $10.99 each
COBALT DRILL BIT Cobalt
drill bits offer the best heat resistance for drilling in extremely hard and
abrasive materials including stainless steel, titanium and cast iron. 135
deg. split point cuts immediately on contact -- no centre punch required.
Ideal for contractors, maintenance, machine shops and garages.
1/16" - Sku 12310-00, Model 12654, $3.29 each
3/32" - Sku 12310-26, Model 12656, $3.29 each
7/64" - Sku 12310-42, Model 12657, $3.29 each
1/8" - Sku 12310-67, Model 12658, $3.99 each
9/64" - Sku 12361-65, Model 12659, $3.99 each
5/32" - Sku 12310-83, Model 12660, $4.29 each
3/16" - Sku 12311-09, Model 12662, $4.99 each
7/32" - Sku 12311-25, Model 12664, $6.79 each
1/4" - Sku 12311-41, Model 12666, $7.99 each
5/16" - Sku 12311-66, Model 12670, $11.49 each
3/8" - Sku 12311-82, Model 12674, $15.99 each
7/16" - Sku 12312-08, Model 12678, $20.99 each
1/2" - Sku 12312-24, Model 12682, $24.99 each
TITANIUM DRILL BIT - STANDARD SHANK Super
hard titanium coating reduces wear and dissipates heat to extend life six
times over HSS bits. Fully resharpenable 135 deg. split point. Super hard
gold coating provides greater lubricity for freer and faster cutting.
1/16" x 1 7/8" - Sku 1131994, Model 12354, $1.29 each
5/64" x 2" - Sku 12320-08, Model 12355, $1.29 each
3/32" x 2 1/4" - Sku 11325-96, Model 12356, $1.49 each
7/64" x 2 5/8" - Sku 11327-11, Model 12357, $1.99 each
1/8" x 2 3/4" - Sku 11327-29, Model 12358, $1.99 each
9/64" x 2 7/8' - Sku 12360-74, Model 12359, $2.29 each
5/32" x 3 1/8" - Sku 11327-37, Model 12360, $2.49 each
11/64" x 3 1/4" - Sku 12361-24, Model 12361, $2.79 each
3/16" x 3 1/2" - Sku 11327-45, Model 12362, $2.79 each
13/64" x 3 5/8" - Sku 12362-80, Model 12363, $2.99 each
7/32" x 3 3/4" - Sku 11327-52, Model 12364, $2.99 each
15/64" x 3 7/8" - Sku 12362-98, Model 12365, $3.29 each
1/4" x 4" - Sku 11327-60, Model 12366, $3.49 each
17/64" x 4 1/8" - Sku 12363-14, Model 12367, $3.99 each
9/32" x 4 1/4" - Sku 12363-30, Model 12368, $4.29 each
19/64" x 4 3/8" - Sku 74018-05, Model 12369, $4.79 each
5/16" x 4 1/2" - Sku 11327-78, Model 12370, $5.29 each
21/64" x 4 5/8" - Sku 74018-39, Model 12371, $5.49 each
11/32" x 4 3/4" - Sku 12363-71, Model 12372, $5.99 each
23/64" x 4 7/8" - Sku 74018-62, Model 12373, $6.29 each
3/8" x 5" - Sku 11327-86, Model 12374, $7.29 each
7/16" x 5 1/2" - Sku 12416-94, Model 1378, $9.29 each
TITANIUM COATED DRILL BIT SET - 13 PIECES
Industrial duty. For repetitive drilling in steel, alloys, wood and
plastics. Lasts up to 6 times longer than high speed bits. Packed in molded
plastic storage case with sizes clearly marked. Sizes 1/8'' and above are
135Deg. split point for immediate cutting on contact. Bit sizes included:
1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64",
7/32", 15/64", 1/4".
Sku 12368-76, Model 12385, $39.99/set
MASONRY DRILL BIT Double
flute drill bit for drilling dry concrete, masonry, brick and tile. Fast
spiral flutes quickly remove debris from hole. Carbide-tipped for long life.
For use in corded or cordless rotary drills only.
(diameter x overall length x shank diameter)
1/8" x 3" x 1/8" - Sku 11384-78, Model 14021, $1.99 each
5/32" x 3" x 5/32" - Sku 74016-23, Model 14022, $1.99 each
3/16" x 3" x 3/16" - Sku 11385-85, Model 14003, $1.79 each
3/16" x 3" x 1/2" - Sku 74017-71, Model 14053, $22.99 each
3/16" x 4" x 3/16" - Sku 11385-02, Model 14023, $2.29 each
1/4" x 4" x 1/4" - Sku 11385-93, Model 14004, $1.79 each
1/4" x 6" x 1/4" - Sku 11385-10, Model 14024, $2.49 each
1/4" x 13" x 1/4" - Sku 11386-35, Model 14044, $7.29 each
5/16" x 4" x 1/4" - Sku 11386-27, Model 14005, $2.29 each
5/16" x 6" x 1/4" - Sku 11385-36, Model 14025, $2.79 each
5/16" x 13" x 1/4" - Sku 11386-43, Model 14045, $7.99 each
3/8" x 4" x 1/4" - Sku 11386-68, Model 14006, $2.79 each
3/8" x 6" x 1/4" - Sku 11385-44, Model 14026, $3.49 each
3/8" x 13" x 1/4" - Sku 11386-50, Model 14046, $8.99 each
7/16" x 6" x 1/4" - Sku 74016-56, Model 14027, $3.99 each
1/2" x 4" x 1/4" - Sku 11386-92, Model 14008, $3.49 each
1/2" x 6" x 3/8" - Sku 11385-51, Model 14029, $3.99 each
1/2" x 13" x 3/8" - Sku 11385-69, Model 14049, $10.49 each
5/8" x 6" x 3/8" - Sku 11386-19, Model 14030, $7.29 each
5/8" x 13" x 3/8" - Sku 11386-76, Model 14050, $12.49 each
3/4" x 6" x 3/8" - Sku 11386-01, Model 14031, $9.29 each
3/4" x 13" x 3/8" - Sku 11386-84, Model 14051, $14.49 each
7/8" x 6" x 1/2" - Sku 74016-80, Model 14032, $10.49 each
7/8" x 13" x 1/2" - Sku 74017-48, Model 14052, $18.49 each
1" x 6" x 1/2" - Sku 74017-14, Model 14033, $12.99 each
CONCRETE SCREW DRILL BIT Carbide
tip provides optimum pilot hole sizes for 3/16'' and. 1/4'' Tapcon concrete
anchor screws. Hardened steel body provides strength and long life. Special
shank tang fits Tapcon installation tools. 5/32" x
4-1/2" - Sku 12302-18, Model 14375, $5.49 each 5/32"
x 5-1/2" - Sku 12390-03, Model 14374, $6.29 each 3/16"
x 4-1/2" - Sku 12302-26, Model 14376, $5.79 each
3/16" x 5-1/2" - Sku 12302-34, Model 14377, $6.29 each
"BLACK MAX" SPADE BIT Standard
length. Features a black quench coating that increases wear resistance. A
15-degree chisel edge design is more positively angled to dig into wood,
drilling holes faster than standard spade bits. Positive grip shank fits all
portable drills. Built-in hole for pulling wires back through walls,
ceilings and floors.
1/4" - Sku 11322-99, Model 14454, $3.29 each
5/16" - Sku 11323-07, Model 14455, $3.49 each
3/8" - Sku 11323-15, Model 14456, $3.49 each
7/16" - Sku 12334-51, Model 14457, $3.79 each
1/2" - Sku 11323-72, Model 14458, $3.49 each
9/16" - Sku 11323-98, Model 14459, $3.79 each
5/8" - Sku 11324-14, Model 14460, $3.79 each
11/16" - Sku 12334-93, Model 14461, $3.99 each
3/4" - Sku 11333-96, Model 14462, $3.79 each
13/16" - Sku 12335-35, Model 14463, $4.29 each
7/8" - Sku 11334-46, Model 14464, $4.29 each
15/16" - Sku 11334-53, Model 14465, $4.29 each
1" - Sku 11334-61, Model 14466, $4.29 each
1 1/8" - Sku 11334-95, Model 14468, $6.29 each
1 1/4" - Sku 11334-79, Model 14470, $6.29 each
1 3/8" - Sku 11335-45, Model 14472, $6.49 each
1 1/2" - Sku 11335-52, Model 14474, $6.29 each
"BLACK MAX" EXTRA LONG SPADE BIT Features
a black quench coating that increases wear resistance. A 15-degree chisel
edge design is more positively angled to dig into wood, drilling holes
faster than standard spade bits. Ideal for extra-long reach. Positive grip
shank fits all portable drills. Built-in hole for pulling wires back through
walls, ceilings and floors.
3/8" x 16" - Sku 12335-19, Model 14426, $10.99 each
1/2" x 16" - Sku 12335-50, Model 14428, $11.49 each
5/8" x 16" - Sku 12335-76, Model 14430, $12.49 each
3/4" x 16" - Sku 12335-84, Model 14432, $12.99 each
7/8" x 16" - Sku 12335-92, Model 14434, $13.49 each
1" x 16" - Sku 12336-00, Model 14436, $13.99 each
FORSTNER WOOD BIT A
superior boring tool for professionals or D.I.Y. Constructed of premium high
speed steel and precision ground. The exclusive 270 deg. Cutting edge
provides perfect, smooth flat-bottomed holes. Stays in position, provides
clean, accurate holes at any angle. ( Unaffected by knots or irregular
grain). Starts quickly on edges or end grain. Will not splinter when cutting
through thin material. Round Shank
1/4" - Sku 11306-16, Model 14504, $14.99 each
3/8" - Sku 11306-24, Model 14506, $14.99 each
1/2" - Sku 11306-32, Model 14508, $16.99 each
5/8" - Sku 11306-40, Model 14510, $19.49 each
3/4" - Sku 11306-65, Model 14512, $21.99 each
7/8" - Sku 11306-73, Model 14514, $22.99 each
1" - Sku 11306-81, Model 14516, $25.99 each Hex Shank
1 3/8" - Sku 11307-07, Model 14522, $35.99 each
1 1/2" - Sku 12303-90, Model, 14524, $44.99 each
1 3/4" - Sku 12304-16, Model 14528, $49.99 each
2" - Sku 12304-24, Model 14532, $57.99 each
2 1/8" - Sku 12304-32, Model 14534, $62.99 each
AUGER BIT
Industrial. Special design bores clean, smooth holes in wood. Fits 3/8'' or
larger electric drills and hand braces. Ideal for woodworkers and serious
DIY'ers.
1/4" - Sku 12342-02, Model 18670, $12.49 each
5/16" - Sku 12342-28, Model 18671, $12.49 each
3/8" - Sku 12342-44, Model 18672, $12.49 each
7/16" - Sku 12342-69, Model 18673, $12.99 each
1/2" - Sku 12342-85, Model 18674, $13.49 each
9/16" - Sku 12343-01, Model 18675, $14.49 each
5/8" - Sku 12343-27, Model 18676, $14.99 each
11/16" - Sku 12343-43, Model 18677, $15.49 each
3/4" - Sku 12343-68, Model 18678, $15.99 each
7/8" - Sku 12344-00, Model 18680, $18.49 each
1" - Sku 12344-26, Model 18682, $20.99 each
TITANIUM DRILL BIT 'Credo'
Titanium Reduced Shank. 3/8'' Shank for drilling larger holes. 15/32"
Sku 12366-03, Model 91-41357, $13.49 each
TAPCON MASONRY DRILL BIT Carbide
tip provides optimum pilot hole sizes for 3/16'' and. 1/4'' Tapcon concrete
anchor screws. Hardened steel body provides strength and long life. Special
shank tang fits Tapcon installation tools.
5/32" x 5-1/2" - Sku 12392-50, Model 14364, $4.49 each 3/16"
x 4-1/2" - Sku 12392-92, Model 14366, $4.29 each
3/16" x 5-1/2" - Sku 12393-18, Model 14367, $4.79 each
MASONRY DRILL BIT SET 3 Piece
Set. Contains 1 each of 5/16", 1/4", 3/16".
Sku 12309-03, Model 14010, $6.49/set
MASONRY DRILL BIT SET 'Credo' 4
piece set. Contains 1 each of: 3/16, 1/4, 5/16 and 3/8'' bits, 4'' length.
Sku 12390-11, Model 91-42104, $5.79/set
EXTENDED LENGTH AIRCRAFT DRILL BIT Stainless
steel. High speed. Ideal for extra reach and deep drilling applications in
wood, metal and plastic. Each bit features a 135-degree split point that
starts fast and reduces bit walking or skating
1/8" x 6" - Sku 12363-97, Model 13158, $4.99 each
5/32" x 6" - Sku 12366-29, Model 13160, $6.29 each
3/16" x 6" - Sku 12366-37, Model 13162, $6.79 each
7/32" x 6" - Sku 12366-45, Model 13164, $7.29 each
1/4" x 6" - Sku 12366-52, Model 13166, $8.29 each
1/8" x 12" - Sku 11319-11, Model 13258, $8.49 each
3/16" x 12" - Sku 11319-29, Model 13262, $10.49 each
1/4" x 12' - Sku 11319-37, Model 13266, $11.99 each
5/16" x 12" - Sku 11319-45, Model 13270, $15.49 each
3/8" x 12" - Sku 11319-52, Model 13274, $19.49 each
7/16" x 12" - Sku 11319-60, Model 13278, $23.99 each
1/2" x 12" - Sku 11319-78, Model 13282, $27.99 each
BRAD POINT DRILL BIT Designed
for drilling smooth, clean cuts in wood. Tip allows for easy positioning and
accurate starts. Designed for use in portable drills and drill presses.
Diameter x Overall length x shank diameter
1/8" x 2 3/4" x 1/8" - Sku 12366-60, Model 14601, $2.79 each
3/16" x 3 1/2" x 3/16" - Sku 12366-78, Model 14602, $2.99 each
1/4" x 3 15/16" x 1/4" - Sku 74021-83, Model 14603, $3.79 each
5/16" x 4 7/16" x 5/16" - Sku 74022-17, Model 14604, $4.49 each
3/8" x 5 3/16" x 5/16" - Sku 74022-58, Model 14605, $5.49 each
7/16" x 5 9/16" x 5/16" - Sku 12330-48, Model 14606, $7.29 each
1/2" x 5 15/16" x 5/16" - Sku 74023-16, Model 14607, $8.29 each
5/8" x 7" x 3/8" - Sku 12330-63, Model 14609, $9.29 each
GLASS AND TILE DRILL BIT Provide
smooth, accurate drilling in ceramic tile, marble, china, mirrors and glass.
The spear-pointed tip design reduces breakout, and the bit features a
carbide tip for extended bit life. These bits are ideal for drilling
fastener holes in bathroom tile or wall mirrors.
1/8" - Sku 12393-67, Model 13301, $5.29 each
3/16" - Sku 12393-75, Model 13303, $5.29 each
1/4" - Sku 12393-83, Model 13304, $5.79 each
5/16" - Sku 12393-91, Model 13305, $6.29 each
3/8" - Sku 12394-09, Model 13306, $8.79 each
1/2" - Sku 12393-42, Model 13307, $9.29 each
DRILL BIT EXTENSION Extension
for spade bits.
6" - Sku 12230-07, Model 17103, $5.49 each
12" - Sku 12230-15, Model 17104, $9.79 each
ROTARY HAMMER BIT
Industrial quality. Carbide tip withstands impact from hammer drill. Faster
drilling through concrete, masonry, brick, tile, slate and plaster. Hardened
body for strength and extra life. Diameter
x Overall length x shank diameter
1/8" x 3" x 1/8" - Sku 12326-93, Model 14101, $3.79 each
3/16" x 4" x 3/16" - Sku 12391-28, Model 14103, $3.99 each
1/4" x 6" x 1/4" - Sku 12391-36, Model 14104, $4.29 each
5/16" x 6" x 1/4" - Sku 12391-44, Model 14105, $4.79 each
3/8" x 6" x 1/4" - Sku 12391-69, Model 14106, $6.29 each
7/16" x 6" x 3/8" - Sku 12391-77, Model 14107, $6.79 each
1/2" x 6" x 3/8" - Sku 12391-85, Model 14109, $7.49 each
5/8" x 6" x 3/8' - Sku 12392-01, Model 14110, $13.99 each
3/4" x 6" x 3/8" - Sku 12325-45, Model 14111, $14.99 each
7/8" x 6" x 3/8" - Sku 12395-73, Model 14112, $17.99 each
1" x 6" x 3/8" - Sku 12325-60, Model 14113, $19.49 each
9/16" x 6" x 3/8" - Sku 12392-84, Model 14114, $9.79 each
11/16" x 6" x 3/8" - Sku 12395-57, Model 14115, $15.99 each
1/4" x 13" x 1/4" - Sku 12392-43, Model 14124, $10.99 each
5/16" x 13" x 1/4" - Sku 12392-68, Model 14125, $12.99 each
3/8" x 13" x 1/4" - Sku 12393-00, Model 14126, $14.49 each
1/2" x 13" x 3/8" - Sku 12393-26, Model 14129, $17.49 each
5/8" x 13" x 3/8" - Sku 12393-34, Model 14130, $18.99 each
3/4" x 13" x 3/8" - Sku 12332-87, Model 14131, $22.99 each
7/8" x 13" x 1/2" - Sku 12395-99, Model 14132, $28.99 each
1" x 13" x 1/2" - Sku 12394-33, Model 14133, $39.99 each
"BLACK MAX" SPADE BIT SET Features
a black quench coating that increases wear resistance. A 15-degree chisel
edge design is more positively angled to dig into wood, drilling holes
faster than standard spade bits. Positive grip shank fits all portable
drills. Built-in hole for pulling wires back through walls, ceilings and
floors. Set includes sizes 3/8, 1/2, 5/8, 3/4, 7/8 and 1".
Sku 11309-13, Model 14482, $22.99/set
SIDEWINDER DRILL BIT SET Features
a speed helix design that penetrates wood, metal and plastic three times
faster than standard high speed steel drill bits. Bits feature a 135-degree
split point that starts cutting immediately upon contact - no centre punch
required. Packed in a molded, plastic storage case. Sizes clearly marked on
case (from 1/16" to 1/4").
7 pieces - Sku 11332-97, Model 12185, $28.99/set
HSS DRILL BIT SET Packed in
a molded-plastic storage case. Sizes clearly marked on case (ranging from
1/16" to 1/4").
7 pieces - Sku 11333-47, Model 10240, $13.99/set
13 pieces - Sku 12368-27, Model 10245, $20.99/set
HSS DRILL BIT 1/2"
shank. Specially designed to fit drills with chucks 3/8'' and larger. 118
Deg. point for general-purpose drilling. Ideal for steel, wood and plastic.
5/8" - Sku 11325-05, Model 10540, $29.99 each
3/4" - Sku 11326-46, Model 10548, $35.99 each
XTEND 13PC DRILL BIT SET High
speed steel. Speed geometry provides 4 times more holes per charge. Fast
starting tip. For use on wood, metal and plastic. Includes plastic case.
Sku 12880-59, Model 12713, $25.99/set
TITANIUM DRILL BIT - REDUCED SHANK Titanium
offers the best durability and speed for repetitive drilling applications in
steel, alloy steel, wood and plastic. Lasts 6 times longer than standard
high speed drill bits. 135-degree split point that starts fast and minimizes
bit walking or skating. For use in 3/8" drills. Diameter
x Overall length x shank diameter
25/64" x 5 1/8" x 3/8" - Sku 74018-96, Model 12511, $9.99 each
13/32" x 5 1/4" x 3/8" - Sku 74019-20, Model 12512, $9.99 each
27/64" x 5 3/8" x 3/8" - Sku 74019-53, Model 12513, $9.99 each
7/16" x 5 1/2" x 3/8" - Sku 12360-66, Model 12514, $10.49 each
29/64" x 5 5/8" x 3/8" - Sku 74019-87, Model 12515, $10.49 each
15/32" x 5 3/4" x 3/8" - Sku 74020-19, Model 12516, $11.49 each
31/64" x 5 7/8" x 3/8" - Sku 74020-43, Model 12517, $12.49 each
1/2" x 6" x 3/8" - Sku 12360-82, Model 12518, $12.99 each
BELL HANGER/INSTALLER DRILL BIT Also
known as an installer drill bit. Designed with a hole in the tip for running
wires through walls, ceilings and floors. Use to install computer,
telephone, television, stereo and security system wires. Wide flute design
provides fast, clean boring action in wood and drywall. Diameter
x Overall length x shank diameter
1/4" x 18" x 1/4" - Sku 74020-76, Model 13321, $15.49 each
5/16" x 18" x 1/4" - Sku 74021-59, Model 13322, $15.49 each
3/8" x 18" x 1/4" - Sku 74021-67, Model 13323, $17.49 each
1/2" x 18" x 3/8" - Sku 74021-75, Model 13325, $17.99 each
DOUBLE FLUTE MASONRY BIT SET For
drilling in brick, cinder block and tile. Double flute design drills twice
as fast as standard masonry bits and the carbide tip minimizes wear and
extends the life of the bit. For use in corded and cordless rotary drills
only. Includes 5 bits, sizes: 3/16"x3", 1/4"x4", 5/16"x4", 3/8"x4" and
1/2"x4".
Sku 74015-99, Model 14012, $10.49/set
NAIL SPINNER BIT
Eliminates wood trim splitting. For spinning 4, 6, 8 and 10 penny finishing
nails into hardwood. 1/4" shank fits all drills.
Sku 74026-39, Model 16621, $9.99 each
BRAD POINT DRILL BIT SET 6-piece
set includes drill bit sizes 1/4" through 1/2" in 1/16" increments. Designed
for drilling smooth, clean cuts in wood. Tip allows for easy positioning and
accurate starts.
Sku 12330-89, Model 14615, $33.99/set
STRAIGHT ROUTER BIT Silver
Series. Carbide tipped. 1/4" shank.
Overall diam.x length /
Cutting edge length/# of flutes
1/8" x 2" / 5/16", 1 - Sku 74026-54, Model 23100,
$6.29 each
3/16" x 2" / 1/2", 1 - Sku 74877-54, Model 23101, $9.29 each
1/4" x 1 7/8', 5/8", 1 - Sku 74026-88, Model 23102, $10.49 each
1/4" x 2 1/4" / 1", 2 - Sku 74026-96, Model 23103, $14.99 each
3/8" x 2 3/16" / 1", 2 - Sku 74027-04, Model 23105, $13.49 each
1/2" x 2 3/16" / 1", 2 - Sku 74027-38, Model 23106, $15.99 each
1/2" x 2 7/16" / 1 1/4", 2 - Sku 74027-79, Model 23107, $19.49 each
5/8" x 2 3/16" / 1". 2 - Sku 74877-47, Model 23108, $14.49 each
3/4" x 2 3/16" / 1", 2 - Sku 74027-87, Model 23109, $14.49 each
ROMAN OGEE ROUTER BIT Carbide
tipped. 1/4" shank. Double flute. 1/2" bearing.
1 1/8" x 2 1/8" / 1/2" / 1/4" - Sku 74876-30, Model
23149, $23.99 each
1 1/2" x 2 3/8" / 11/16" / 1/4" - Sku 74035-20, Model 23150, $27.99 each
"UNIBIT" DRILL BIT - STEP Step
drill "Unibit" #4. 3/16" to 7/8" sizes (1/16" steps)..
Sku 74880-91, Model 10234, $52.99 each
Sku 74881-09, Model 10234CB, $62.99 each
100 PIECES DRILL BITS SET Bit
holders and countersink including in set. Hss drill bits for fast and clean
drilling in wood and metal.
Sku 75059-44, Model 90100, $10.49/set
9 PIECES DRILL SET Fits all
drill/drivers. Includes hand driver storage case with convenient belt clip.
Fits most common sizes for common household projects. Magnetic bit holder
for secure with one handed operation. 1" and 2" power bits.
Sku 75059-51, Model 89009, $3.29/set
9 PIECES DRILL SET Including
4 2" power bits 1 #2, 2 hex-shank twist drill bits 1/16" and 1/8", 3
nutsetters 1/4", 5/16" and 3/8" and 1 belt loop canvas pouch.
Sku 75059-77, Model SBID9, $15.49/set
42 PIECES DRILL SET Including
a wide selection of 1" and 2" insert bits with 1 magnetic bitholder, 2
nut-setters 1/4" and 5/16" and 1 case.
Sku 75059-85, Model T4042, $30.99/set
MASONRY DRILL BIT For
Tapcon screw.
5/32" x 3 1/2" - Sku 75094-09, Model O40580, $3.29
each
5/32" x 4 1/2" - Sku 75094-33, Model O40597, $3.79 each
5/32" x 5 1/2" - Sku 75094-41, Model O40603, $4.29 each
3/16" x 3 1/2" - Sku 75094-58, Model O40610, $3.79 each
3/16" x 4 1/2" - Sku 75094-74, Model O40627, $3.99 each
3/16" x 5 1/2" - Sku 75094-82, Model O40634, $4.49 each
3/16" x 6 1/2" - Sku 75094-90, Model O40641, $5.99 each
INSERT DRYWALL BIT WITH STOP
#2 phillips x 1" - Sku 75098-88, Model O71324, $2.49
each
#2 phillips x 2" - Sku 75099-04, Model O71355, $2.99 each
#2 robertson x 2" - Sku 75099-12, Model O71379, $2.99 each
HAMMER DRILLING BIT "SDS PLUS"
Diameter / Useable length / overall length
5/32" / 4" / 6" - Sku 75083-51, Model 322002, $13.99
each
3/16" / 4" / 6" - Sku 75083-85, Model 322004, $8.29 each
1/4" / 4" / 6" - Sku 75084-01, Model 322017, $6.79 each
1/4" / 10" / 12" - Sku 75084-19, Model 322020, $6.99 each
5/16" / 4" / 6" - Sku 75084-27, Model 322022, $13.49 each
3/8" / 4" / 6" - Sku 75084-35, Model 322024, $8.79 each
3/8" / 10" / 12" - Sku 75084-43, Model 322026, $9.29 each
1/2" / 4" / 6" - Sku 75084-50, Model 322031, $16.49 each
1/2" / 10" / 12" - Sku 75084-68, Model 322033, $11.49 each
5/8" / 4" / 6" - Sku 75084-76, Model 322041, $18.99 each
3/4" / 6" / 8" - Sku 75084-84, Model 322047, $15.49 each
3/4" / 10"/ 12" - Sku 75084-92, Model 322048, $36.99 each
Pilot Drill Bits
REPLACEMENT PILOT DRILL
Replacement pilot drill for #18301 and #18303
Sku 10267-23, Model 18304, $3.49 each
REPLACEMENT PILOT DRILL For
mandrel #18501 and #18503.
Sku 10267-56, Model 18504, $3.49 each
REPLACEMENT PILOT DRILL For
mandrel #18502 and #18410.
Sku 10267-64, Model 18505, $3.49 each
PILOT DRILL LENOX
Replacement Pilot Drill for Lenox arbors: 1L, 2L, 4L. 10 Per Pkg.
1/4" / 6mm
Sku 12515-11, Model 30850-4321,
$6.49 each
PILOT DRILL
Replacement pilot drill. 1/4"
Sku
75088-07, Model 373000, $2.29 each
ADJUSTABLE WOOD BIT
Adjustable cutting blade bores a variety of hole sizes. Cuts 19 size holes
in increments of 1/8" (7/8" to 3"). Lock head screw securely holds blade at
desired boring diameter.
Sku 75872-07, Model
45002, $52.99 each
124 PC. IMPACT DRIVER ACCESSORY KIT
Assortment of 124 piece 1/4'' hex shank bits for impact screwdriver.
Sku 75752-77, Model T-01183, $82.99/set
Photo not available
"DAREDEVIL" SPADE BIT EXTENSION
1/4", 6 pans shank.
6" - Sku 75667-48, Model
DSBE1006, $3.29 each
12" - Sku 75667-55, Model DSBE1012, $4.29 each
Accessories
DRILL BIT SHARPENING TOOL
Engineered to allow sharpening of drill bits to factory accuracy. Capacity;
fractional drills 1/8" to 3/4" (3 to 19 mm). Angle adjustments lock in to
grind drill bits for more accurate drilling in a variety of materials. For
use with standard electric bench grinders or surface grinders. Metal
construction.
Sku 10904-30, Model 024070, $64.99 each
DRILL GAUGE
Identifies drill bit sizes. Heavy gage hardened and ground steel. Hole size
and decimal equivalents are etched on the face.
Sku 10904-48, Model 022009, $27.99 each
WOODEN DOWEL "MILLER" For use
with TruFit drill bit. Self-capping, no need for plugs. Superior adhesion.
Glue settles along ribs, not forced to bottom or out of top 1
5/8" x 1/4" dia, Oak, 100 pieces (Mini X)
Sku 12866-32, Model O8C65100, $26.99/pack 1
5/8" x 1/4" dia, Birch, 100 pieces (Mini X)
Sku 12847-02, Model B8C65100, $22.99/pack 2
3/4" x 7/16"dia, Oak, 40 pieces (1 X)
Sku 12866-16, Model O12D1140, $14.99/pack 2
3/4" x 7/16"dia, Birch, 40 pieces (1 X)
Sku 12846-29, Model B12D1140, $12.99/pack 3
1/2" x 1/2" dia, Oak, 40 pieces (2 X)
Sku 12866-24, Model O15D1440, $20.99/pack
3 1/2" x 1/2" dia, Birch, 40 pieces (2 X)
Sku 12846-86, Model B15D1440,
$16.49/pack
WOODEN DOWEL AND DRILL BIT KIT The kit
contains the dowels and one TruFit drill bit. Shape and size of TruFit drill
bit matches dowel perfectly. Revolutionary stepped dowel provides faster,
stronger wood construction. 1 5/8" x
1/4" dia, Birch, 100 pieces (Mini X)
Sku 12847-10, Model B8C65KIT, $34.99/set 2
3/4" x 7/16"dia, Birch, 50 pieces (1 X)
Sku 12846-78, Model B12D11KIT, $36.99/set 3
1/2" x 1/2" dia, Birch, 50 pieces (2 X)
Sku 12846-94, Model B15D14KIT, $47.99/set
SPEEDBOR LOCK-N-LOAD" QUICK CHANGE ADAPTOR Long
length hexagonal shank for faster loading. Nickel plating provides impact
and corrosion resistance. Internal hexagonal drive eliminates slip-page.
Recessed black sleeve prevents accidental releases. Tapered head design
guides extensions through holes. Slim diameter chuck and extensions pass
through 11/16" holes. Carded.
2" - Sku 12572-78, Model 90102, $12.99 each
6" - Sku 12331-70, Model 90106, $15.49 each
12" - Sku 12331-88, Model 90112, $15.99 each
DRILL GAUGE 29
fractional drills. Tempered steel. Reads in fractions with decimal
equivalents. Easy to read white letters on black finish.
We welcome all inquiries on our products. Please use
Feedback form to
contact us.
Please note that all prices in all categories are
listed in Canadian Dollars. All items are subject to 15% Harmonized Sales
Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when
shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST)
when shipped to British Columbia. All other
provinces/territories are subject to 5% Goods and Service Tax (GST). International and United States sales are
tax exempt (duty and brokerage fees, if applicable, are the responsibility of
the purchaser).
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).
Not all items can be shipped due to weight and size factors. Items marked
free shipping are for within Canada and the USA (with the exception of remote
locations)). We do not
ship chemical products or insecticides. All prices
subject to change without notice. Not all items may be available at all
times. We reserve the right to choose our customers and to limit
quantities if needed. Website is also subject to error. If a pricing
error is discovered it will be fixed, however we are not obliged to sell for the
error. Website pricing may differ from in-store pricing.
We accept VISA, Mastercard or American Express. You can also send a money order
or check, in which case we will wait for it to clear prior to shipping out the
goods. In some cases, Paypal will be used as a payment method.
;)
