SIDE LEG HOLDER
Side leg holder with quick adjust bolt. Can be mounted on the inside or
outside. Excellent for stationary docks -
5.25" X 5.25 " X 2". Made of 1/8" hot dipped galvanized steel
Sku
75369-23, Model 99-003-F, $25.99 each
LEG BRACE HOLDER Use for
additional stability and leg support between two legs. Serves as a single or
double leg brace holder. Clamps on to the leg piping eliminating the need to
remove the dock leg for installation. Bolts included. Hot dipped galvanized
with 7/16" holes for 3/8" carriage bolts.
Sku 71309-90, Model 93-105-F,
$12.49 each
CORNER LEG HOLDER Designed
to be used with up to 1-7/8" diameter pipe. Mounts on the inside corner of
wooden docks. 1/8" hot dipped galvanized steel with 7/16" holes for 3/8"
carriage bolts.5-7/8" X
5-1/4"
Sku
71310-30, Model 86-100-F, $17.99 each
SIDE LEG HOLDER Designed
to be used with up to 1-7/8" diameter pipe. Mounts on the inside or outside
of the dock frame. 1/8" hot dipped galvanized steel with 7/16" holes for
3/8" carriage bolts.5-7/8" x
5-1/4"
Sku
71310-48, Model 86-101-F, $15.49 each
OUTSIDE PIPE HOLDER Bolts to
side of dock frame to anchor it in place yet allows vertical movement for
water variances.8" X 5.25"
X 1/4"
Sku
75369-07, Model 99-005-F, $36.99 each
INSIDE CORNER PIPE HOLDER Inside
corner pipe holder. With slotted holes for various wood thicknesses.8.25" X
5.25" X 3"
Sku
75368-73, Model 99-007-F, $57.99 each
Leg Braces
CORNER LEG BRACE HOLDER Used when
running a 89-101-F (713-1147) Leg Brace set at right angles from a corner
leg to two side legs for optimum stability. 1/8" hot dipped galvanized steel
with 7/16" holes for 3/8" carriage bolts. Bolts included.
Sku 71310-97, Model 87-107-F,
$12.49 each
LEG BRACE SET Use with
93-105 (713-0990) and/or 87-107 (713-1097). Includes 2 outer links and 1
inner link. Extends to 72". 1/8" hot dipped galvanized steel with 7/16"
holes for 3/8" carriage bolts.
Sku 71311-47, Model 89-101-F,
$26.99 each
Leg Caps
PLASTIC LEG CAPS Contain
UV inhibitors and cover raw leg pipe edges for safety. Also adds a finishing
touch to the dock. 1/8" hot dipped galvanized steel. 2 1/2" x 2 1/2".
4 per package
Sku 71311-96, Model 91-111F,
$7.29/pack
Leg Pipes
GALVALUME LEG PIPE Heavy
wall steel with 10 times the corrosion resistance of normal steel and twice
the resistance of hot dipped galvanized steel. 1.9 gauge / 1-7/8" outside
diameter.
6'8" - Sku 71314-69, Model 93-168-F, $42.99 each
10' - Sku 71314-77, Model 93-110-F, $52.99 each
Base Plates
BASE PLATE Used as a
footing. It may be bolted to a 2" x 6" piece of lumber and joined to an
adjacent leg base plate for increased stability. 1/8" hot dipped galvanized
steel with 7/16" holes for 3/8" carriage bolts.
Sku 71310-55, Model 86-102-F,
$15.49 each
MUD AND ROCK BASE PLATE Mud pad
for mud and hard surfaces. Used for securing dock at the lake. Hot dipped
galvanized. For use with 1-1/2" pipe or 1.9" tube. Pipe can go through into
bottom for additional stability. Pointed corners also grab when the bottom
is rocky. 7/16" holes.
Sku 71311-88, Model 94-102F,
$30.99 each
Outside Corners
OUTSIDE CORNER END
10" x 10" x 5.25" x 1/4"
Sku 75369-15, Model
99-004-F, $26.99 each
FEMALE OUTSIDE CORNER Female
outside corner. Use with all styles of male connector hinges.10" X 10" X
5.25" X 1/4"
Sku 75368-57, Model
99-010-F, $42.99 each
MALE OUTSIDE CORNER Male
outside corner. Can be used with all styles of female connector hinges.10" X 10" X
5.25" X 1/4"
Sku 75368-65, Model
99-009-F, $38.99 each
Corner Plates/Brackets
CORNER PLATE Mounted
on inside corners for increased corner strength. 1/8" hot dipped galvanized
steel with 7/16" holes for 3/8" carriage bolts.
Sku 71310-71, Model 86-104-F,
$12.49 each
CORNER PLATE Hot
dipped galvanized. Inside corner mounting to increase corner strength. 1/4"
plate for heavy duty use. 9/16" square holes for carriage bolts.5-1/4" x
1/4"
Sku 71312-12,
Model 92-104-F, $17.99 each
INSIDE JOIST CORNER BRACKET Hot
dipped galvanized. Use on interior framework joists and stringers where
heavy duty hardware is not needed. Reduces dock weight and costs. 1/8"
plate. 7/16" holes for carriage bolts.
Sku 71312-38, Model 95-122-F, $9.29 each
CORNER PLATE WITH ANCHOR CHAIN BAR Hot
dipped galvanized. Mounts to inside corner of dock framing and allows for
attaching anchor with chain only. 1/4" plate. Slot width is 1/2", this
allows for quick and easy tension adjustment when water fluctuates. 9/16"
square holes for carriage bolts.
Sku 71312-53, Model 92-116-F, $22.99 each
INSIDE CORNER WITH BRACE SLOT HD Anchor
Chain Corner, offers maximum corner strength when used with the 99-004-F
outside corner or a corner connector hinge. 8.5" X
5.25"
Sku 75368-32,
Model 99-001-F, $30.99 each
Backer Plates
BACKER PLATE Hot
dipped galvanized. To be used as a backer to all hardware items, or between
corner and side leg holder and wood for additional strength. 7/16" square
holes for carriage bolts.5-1/4" x
5-1/4"
Sku
71312-20, Model 93-122-F, $8.29 each
BACKER PLATE FOR STATIONARY DOCKS Hot
dipped galvanized. To be used as a backer to all hardware items, or between
corner and side leg holder and wood for additional strength. 7/16" square
holes for carriage bolts. For stationary docks. 5 1/4" x 5 1/4"
Sku 71314-44, Model 87-122-F, $8.29 each
Joist Corner/Washer Plates
INSIDE JOIST CORNER Joist
corner. Use to mount stringers with 99-006-F washer plates (#753-6899). Also
use as a backer plate to prevent cleats from pulling out.2.5" X
5.25"
Sku 75369-31, Model 99-002-F,
$10.49 each
WASHER PLATE Plate
designed to support the chain retainer and the corner joist holder. Can be
used with chain retainer 99-013-F (753-6824), side leg holder 99-003-F
(753-6923), or inside joist corner 99-002-F (753-6931).5.25" X
1.5" X 1/4"
Sku 75368-99, Model
99-066-F, $6.29 each
Connector Hinges
CONNECTOR HINGE Used to
easily join sections of dock together. Also accommodates joining a fixed
ramp to the dock at varying angles. Hinge pin included. 1/8" hot dipped
galvanized steel with 7/16" holes for 3/8" carriage bolts.
Sku 71310-63, Model 86-103-F,
$18.99 each
CONNECTOR HINGE Hot
dipped galvanized. Can be used to connect floating dock sections together,
and also to connect dock to sea wall. 9/16" square holes.
Sku 71312-04, Model 91-112-F, $72.99 each
Connector Pins
CONNECTOR PIN Used to
join female and male connectors.
Sku 71315-27, Model 96-111-F, $10.49 each
T Connectors
T CONNECTOR For
floating docks. 5 1/4" x 5 1/4"
Female
- Sku 71315-19, Model 99-011-F, $20.99 each
Male - Sku 71315-43, Model 99-012-F, $17.99 each
Docking Items
ANCHOR TIE DOWN CORNER Used to
help secure the dock in place in rough water conditions. 5 7/8" x 5 1/4"
Sku 71312-46, Model 91-116-F, $21.99 each
"EZE DOCKER" The EZE
Docker is a robust, one-piece, spring operated portable mooring ring which
simplifies a boaters' docking problems. If left tied to the end of your
mooring lines you will never forget where to find them and when docking, you
simply insert between the dock planks, and press down and turn 90 degrees.
Within seconds you securely moored without ever having to leave the boat.
All steel construction, zinc plated and leachate coated for additional
protection to adverse weather conditions. 10" x 7" x 2"
Sku 71313-37, Model 2701Z-F, $29.99 each
Fenders
TWIN EYE FENDER
Molded-in valve ensures air doesn't leak. Roto-molded design prevents
splitting and ensures a strong lug for tying up.
4.5" X 16"
Sku
75369-49, Model 50-161-F, $12.49 each
INFLATABLE BOAT FENDER Their
softness protects the hull coating while their toughness offers maximum
protection against impact. Use a hand pump with appropriate needle to adjust
air pressure.
5.5" x 20" - Sku 71266-18, Model 50-201-F, $20.99
each
6.5" x 23" - Sku 71266-26, Model 50-231-F, $25.99 each
FENDER HOLDER WITH ADJUSTER Tough and
durable PVC mounting strap snaps over railings, lifelines or stanchions.
Allows fender lines to be adjusted in length in a matter of seconds.
White.
Sku 75367-09, Model 91-531-F, $10.49
each
Dock Lines
TWISTED DOCK LINE Nylon.
3/8" diameter. White.
10' - Sku 74514-53, Model 14103, $8.29 each
15' - Sku 74514-61, Model 14104, $9.29 each
DOUBLE BRAIDED DOCK LINE Nylon.
3/8" diameter. White.
10' - Sku 74514-46, Model 14105, $13.49 each
15' - Sku 74514-04, Model 14106, $16.49 each
TWISTED ANCHOR LINE Nylon.
3/8" diameter. White. 50'
Sku 74513-47, Model 14204, $23.99 each
Cleats/Mooring Rings
ROPE CLEATS Rope
cleats. All priced individually but only sold as packs of 10.
2 1/2", Chrome (single pack) -
Sku 75442-57, Model 2197C-BC, $1.39 each
2 1/2", White (double pack) - Sku 75465-83, Model 2197W-V, $2.79/pack
2 1/2", Black (double pack) - Sku 75466-17, Model 2197FB-V, $2.79/pack
2 1/2", Brass (double pack) - Sku 75442-65, Model 2197B-V, $2.79/pack
2 1/2", Antique brass (double pack) - Sku 75465-67, Model 2197AB-V,
2.79/pack
2 1/2", Satin nickel (double pack) - Sku 75465-75, Model 2197SN-V,
$2.79/pack4 1/2", Chrome (single pack) - Sku 73201-12, Model 2198C-B, $2.29
each
GALVANIZED CLEAT
Traditional cast iron cleat. Mounting holes are recessed with a hexagonal
shape to stop the head of a carriage bolt from turning while securing the
cleat to a surface.
4" - Sku 75365-35, Model 2804-F,
$3.29 each
6" - Sku 75365-43, Model 2806-F, $5.29 each
HDPE DOCK CLEAT Injection
molded high density polyethylene with UV stabilizers. Attractive, functional
and durable. Will not chip or crack. Plastic.
6" - Sku 75364-93, Model 2306-F,
$5.29 each
8" - Sku 75364-85, Model 2308-F, $6.29 each
CLEATS - ROPE Rope
cleats without screws. No rust.
6" - Sku 71200-25, Model 223-347, $3.79 each
DOCK CLEAT These
cast aluminum cleats are sand blasted to give you a clean grey matte finish.
Each cleat is designed with an extra wide footprint for added strength. Has
an enlarged counter-sink hole for easy installation with a socket. Can be
through-bolted or lag-bolted.
6" - Sku 71311-21, Model 2406-F, $7.29 each
8" - Sku 71311-39, MOdel 2408-F, $11.49 each
MOORING RING An
economical and traditional strong mooring ring with a durable white
polyester powder coat finish. 2-1/4" ring diameter. Base dimensions: 5-1/4"
x 2-5/8".
Sku 71311-05, Model 87-108-F, $8.29 each
TIE-UP CLEAT Used
where strength and basic function is required. Easy and efficient to use.
Durable white polyester powder coat finish prevents rusting while enhancing
the look of your dock.
Sku 71311-13, Model 87-11-F, $10.49 each
PORTABLE TIE-UP DOCK CLEAT Easy to
store and easier to use. Strong, powder coated cleat with rop ring fits
neatly in between dock timbers and twists 90 degrees to lock in place. Now
you can position your lines exactly where you want, to best protect your
boat without concern for where existing dock cleats may be located.
Sku 71311-70, Model 91-107-F, $11.49 each
FLIP-UP CLEAT For
special applications where safety on the dock may be a concern. Conveniently
flips up for easy use and folds down to a low profile base when not in use.
White. 6"
Sku 71313-86, Model 2606W-F,
$30.99 each
POLISHED FLIP UP CLEAT Cast from
solid marine grade almag 35 aluminum. Distinctive and highly functional. Low
profile prevents injuries and has a unique low profile.
6" aluminum - Sku 75364-10, Model 2606P-F, $16.49
each
8" aluminum - Sku 75365-19, Model 2608P-F, $25.99 each
8" white - Sku 75365-27, Model 2608W-F, $25.99 each
CLASSIC CLEAT Cast from
solid marine grade almag 35 aluminum and brunished giving them a traditional
metallic finish. Distinctive and highly functional.
4.5"
White aluminum - Sku 75364-69, Model 2504W-F, $13.49 each
Polished aluminum - Sku 75364-77, Model 2504P-F, $13.49 each
6.5"
White aluminum - Sku 75364-44, Model 2506W-F, $20.99 each
Polished aluminum - Sku 75364-51, Model 2506P-F, $20.99 each
CLASSIC CLEAT Cast from
solid marine grade Almag 35 aluminum and powder coated giving them a
traditional metallic finish. Distinctive and highly functional. 8.5"
White aluminum - Sku 75364-28, Model 2508W-F, $30.99
each
Polished aluminum - Sku 75364-36, Model 2508P-F, $30.99 each
Boat/Dock Bumpers
"PROTECT" CORNER These
heavy-duty bumpers are manufactured from PVC with UV inhibitors and
fungicides. Have excellent shock absorption qualities and will not mark or
mar the hull of your boat.15.2" X
2.6" X 4"
Sku
75364-02, Model 1059-F,
$15.49 each
"PROTECT" STRAIGHT BUMPER Heavy
duty bumper is manufactured from MPR (Melt Processible Rubber). Has
excellent shock absorption qualities and will not mark or mar the hull of
your boat.12.3" X
2.6" X 4"
Sku
75363-78, Model 1058-F, $14.49 each
DOCK CORNER BUMPER Protect
your vessel from damaging impact with dock corners. Air-filled bumper is
constructed from nylon reinforced vinyl and features a built-in air valve
for inflation or deflation if necessary. Attaches to dock with 8 screws.
White in colour. UV protectors. Stainless steel mounting scews included.9" x 9" x
3-5/8"
Sku
71312-87, Model 1057-1-F, $30.99 each
BOAT SAVER Developed
specifically for Air Cushion spot protection. Can be mounted vertically or
horizontally on docks, pilings or boat houses. Includes stainless steel
mounting screws. White. 24" long
Sku 71313-03, Model 1005-F, $23.99 each
DOCK BUMPERS "ULTRA GUARD" Offers
the ultimate in cushioning of impacts from your boat. Molded in ribs on the
interior of the UltraGuard ensure it is very soft, but durable and will not
collapse. The back has a slight radius allowing for easy mounting on pilings
as well. 35"L x 5"H x 2-1/2"D.
Sku 75367-17, Model 1008-F, $30.99 each
BUMPER TORPEDO These
large, durable bumpers add an attractive and functionally rugged cushion to
the leg pipes of your docking system. Each weighs 2.7lbs and measures 18"
tall with a diameter of 5". Place them on dock leg pipes over the mounting
brackets to prevent damaging your watercraft from protruding bolts.18" X 6" X
6"
Sku 75366-91, Model 91-110-F,
$26.99 each
BOAT SHIELD Extruded
U.V. stabilized polyethylene foam bumper is contoured at the back so it can
be mounted both horizontally on your dock or vertically on pilings. The
beveled edge helps deflect your boats' fenders so they do not catch under
the profile. The light grey colour matches up with the natural colour of
weathered wood. Stainless steel screws and washers included.48" X 5" X
2.75"
Sku 75367-25, Model 1007-F,
$26.99 each
Profiles
"SUPER SAVER" PROFILE Developed
to be installed as a conventional profile or as an AIRCUSHIONT profile
system by using corners, end plugs and connectors. Easily installed on any
horizontal or vertical surface. Large air volume provides excellent
protection. Corners, end plugs, connectors and stainless steel screws sold
separately. Package of 3. 8'
Sku
75366-83, Model 1015-F, $154.99/pack
SMALL "P" PROFILE Perfect
for small outboards or personal watercrafts. Will retain resiliency and
brilliance for years. Can be installed in minutes.
2-5/8"X1-1/2"X16'
Sku 75365-92, Model 1170-F, $57.99 each
FULL FACE PROFILE Ideal for
larger applications, this profile provides extra strength and security
against damage to boats or property. Double internal channels with cross
girder adds additional protection from impacts and provides a large contact
area.
4.5"X1.25"X16'
Sku 75366-00, Model
1160, $82.99 each
"C" GUARD PROFILE Economy
C-shaped co-extruded profile made of marine grade PVC with UV inhibitors.
Will not crack or distort, even in extreme temperatures. Can be used on flat
surfaces as well as on pilings. 10'
Sku 75366-59, Model 1131-F, $24.99 each
"DOCK GUARD" PROFILE Dock
Guard bumper. The economy Dock Guard profile can be used in light to medium
duty applications. It features a raised lid for gunwale protection on Ski
and Bass boats. Made of marine grade PVC with UV inhibitors. Will not crack
or distort with sun and temperature extremes. Each piece is 10' in length.2-7/8" x
3/4" X 10'. Item comes rolled up in bag so it is shippable.
Sku 75366-34, Model 1135-F,
$24.99 each
MOUNTING SCREWS & ROBERTSON BIT Bag of
100 stainless steel mounting screws. Stainless steel will prevent unsightly
staining caused by rusting of regular steel fasteners. Recommended for use
with all profiles. Robertson No2 bit included. 1"
Sku 75367-41, Model 1006-F, $23.99/pack
Mooring Whip
MOORING WHIP These
quality DockEdge mooring whips act as springs to maintain your boat at a
safe, convenient distance from your dock and prevent impacts from waves or
the wakes of passing watercraft. Starting with a solid rod and manufactured
in multi-stages with triple cross-wound fiberglass gives these mooring whips
the necessary strength and flex to retain the boats' position and prevent
overflexing of the whip. Solid, cast aluminum base with built-in cleat, ring
and thumb screw. Unique tip with functional roller and a tie-off cleat. The
whip lines effortlessly roll through the pulley at the tip causing the boat
to gently approach the dock for boarding. Patented cross-wound material.
Double-braided nylon whip lines, spring lines and unique line tensioner for
one-handed set-up. Stainless steel mounting hardware included. 8 ft. length
accommodates craft up to 18' or 2500lbs. 12 ft. length accommodates craft up
to 23' or 5000lbs.
8' - Sku 71313-94, Model 3200-F, $259.99 each
12' - Sku 75365-50, Model 3400-F, $14.99 each
Dock Ladders
ALUMINUM LADDER These
durable ladders are ideal for sure-footed access to and from the water or
boat and with a load capacity of 400lbs, these rugged ladders will stand the
test of time. Perfect for seawalls or dock applications with varying water
levels. Rail height: 19¾" above the dock. Distance to first step from dock
surface, 14". 12" distance between steps. Steps are 1¾" deep and 15¼" wide.
4 steps - Sku 75365-76,
Model 2014-F, $159.99 each
3 steps - Sku 75365-84, Model 2013-F, $144.99 each
Dock Floats
EMPTY DOCK FLOAT 250 Has a
flotation capacity of 260lbs. Dimensions: 24" x 48"x 8" high and a tare
weight of 21lbs. Equipped with slots and recessed flanges for easy use with
stringers.2' X 4' X
8"
Sku 75368-08,
Model 99-238-F, $92.99 each
EMPTY DOCK FLOAT 400 Flotation
capacity of 400lbs. Dimensions: 24" x 48" x 12" high and a tare weight of
23.5lbs. Equipped with slots and recessed flanges for easy use with
stringers.2' X 4' X
12"
Sku 75367-90,
Model 99-242-F, $129.99 each
EMPTY DOCK FLOAT 550 Top
mounted 1" drainage plug has a sloped trough to eliminate water accumulation
around the plug. Recessed flanges and center trough allow the use of 2' or
4' centers. Minimum wall thicknesses of 1/4" and up to 5/16" at fastening
points make the float extremely strong and resilient to splits and
punctures. 10 easy-to-get-at locations from which to attach the float to the
stringers. Dimensions: 24" x 48" x 16" high, and a tare weight of 40lbs.
Equipped with recessed flanges for easy use with stringers. 2' x 4' x
16"
Sku 75367-74, Model
99-246-F, $199.99 each
Dock Wheels
DOCK WHEEL ROLLING Tough
rigid wheels with rust-proof axles offer stress, crack and impact
resistance. They roll over any terrain and are great for roll-in docks. Has
a capacity of over 700lbs. 18". Black plastic.
Sku 75366-42, Model 90-021-F, $52.99 each
DOCK WHEEL "CORNER MOUNT"
Inflatable corner dock wheel. Smooth rolling wheels offer substantial dock
cushioning and feature molded-in valves to adjust the level of firmness.
Heavy-duty hot-dipped galvanized hardware mounts securely to dock. Guides
boats into your slip easily, regardless of wind and current conditions.
9"
Sku 75367-58, Model 95-078-F, $62.99 each
Dock Edging
UTILITY 'T' MOLDING
Maintenance-free utility molding that will maintain it's attractive
appearance for a lifetime. Coating becomes part of the metal, therefore,
will not chip, flake or peel like paint. Uses: security grids, railings,
conduits, bracing, dock edging, mobile homes, garment hangers, fencing,
trailers and many more. Anodized aluminum, satin clear finish. 3/4" x
8'
Sku 74773-00, Model
UM-A4048-SCL-8, $20.99 each
Dock Lighting
SOLAR LIGHT "DOCKLITE" The
wireless solar DockLite is easy to install, as well as durable and
weatherproof. Its low profile construction makes it an attractive and
functional addition to docks, walkways, decks and landings. Ideal for
illuminating trouble spots on pathways, or transition areas such as from
dock to shore. With extended duty solar-charged batteries, the DockLite will
last until sunrise. Automatic on-at-dusk. Easily withstands pedestrian
traffic as well as moderate vehicle traffic such as hand carts and more.
Grey
Sku 75367-66, Model 96-255-F, $30.99
each
SOLAR "POST LIGHT" Powerful
solar charging performance. Easy twist-on lid with large rubber seal. 360°
lenticular light-diffusing lens and domed reflector maximize light output.
Installs easily and without wires. Patent pending universal fitting fits
1-5/8", 1-7/8", 2-3/8", Brock Post & 3-1/4" ID posts, as well as universal
flat surfaces. Also fits new 2.00" square tube (51mm) OD with available
adaptor popular in Michigan & Ontario areas. Grey
Sku 75367-82, Model 96-258-F, $72.99 each
SOLAR LIGHT "CLEAT LITE" These
solar lights are mounted on top of a sturdy galvanized steel base, housed
inside an attractive colonial style, 12" tall and 4" wide vinyl pillar. Easy
to install. Wireless. These decorative and functional dock accessories will
add style to your dock day or night. The lamp is designed to illuminate your
boat, dock and stainless steel cleat, and not shine in your eyes. Each kit
includes pillar, stainless steel cleat, galvanized mounting base, solar
light, and rechargeable batteries.4" X 4" X
12"
Sku 75367-33, Model 96-250-F,
$92.99 each
Dock Hardware Kits
6'X12'DOCK HARDWARE KIT Floating
dock hardware kit for a 6' x 12' dock section. Comes with all hardware and
bill of construction materials needed. Easy to use, designed for use with
the Howell 550 float (99-246-F, #753-6774). Can easily be connected to other
sections, or used with another Dock 2 Go kit for a 24' section. For
connections, see the Dock 2 Go connection kit (#753-6840). Galvanized
steel
Sku 75368-81, Model 85-272-F,
$374.99/kit
CONNECTOR KIT Floating
dock hardware connector kit, for use with "Dock 2 Go". Includes all
connectors required to connect two sections of floating docks. 6' x
12'
Sku 75368-40, Model 85-205-F, $99.99/kit
Repair Materials
"PLUG TITE" HYDRAULIC CEMENT MIX Stops
leaks immediately, even when water is flowing. Use it on concrete or masonry
walls or floors. Ideal for underwater pool and dock repairs. In a
pail.
2kg - Sku 74396-98, Model
12171001,
$13.99 each
5kg - Sku 27635-89, Model
12171005,
$23.99 each
15kg - Sku 27635-97, Model
12171015,
$49.99 each
MARINE AND RV GLUE Secure
and repair windshields. Repair fiberglass. Seal rivets and cracks in
aluminum. Repair awnings and boat covers. Repair dock bumpers. Repair tank
leaks and pipes. Apply to rope ends to prevent fraying or unraveling. Attach
moldings and medallions. 110ml
Sku 27822-82, Model 170034, $9.29 each
Miscellaneous Dock Hardware Items
CHAIN RETAINER Chain
retainer. Holds chains up to 1/2" in diameter to secure the dock in
position.5.25" X 6"
X 1/4"
We welcome all inquiries on our products. Please use
Feedback form to
contact us.
Please note that all prices in all categories are
listed in Canadian Dollars. All items are subject to 15% Harmonized Sales
Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when
shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST)
when shipped to British Columbia. All other
provinces/territories are subject to 5% Goods and Service Tax (GST). International and United States sales are
tax exempt (duty and brokerage fees, if applicable, are the responsability of
the purchaser).
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).
Not all items can be shipped due to weight and size factors. We do not
ship chemical products or insecticides. All prices
subject to change without notice. Not all items may be available at all
times. We reserve the right to choose our customers and to limit
quantities if needed. Website is also subject to error. If a pricing
error is discovered it will be fixed, however we are not obliged to sell for the
error. Website pricing may differ from in-store pricing.
We accept VISA, Mastercard or American Express. You can also send a money order
or check, in which case we will wait for it to clear prior to shipping out the
goods. In some cases, Paypal will be used as a payment method.
