Product Information

EAVEGUARD® Shingle Underlayment
Guards the interior of your home against leaks caused
by ice or snow buildup and wind-driven rain!
Bakor Eaveguard Shingle Underlayment is a self adhering
aphalt waterproofing underlayment. It is composed of a high tack,
rubberized asphalt, coated on a non woven glass fiber mat. Sand on the
upper surface provides a non-slip working substrate and the lower surface has a
split back release film for ease of application. Bakor Eaveguard shingle
underlayment is easily installed under shingles and over plywood, orient strand
board and dimension lumber decks. it is used at eavesthrough points,
valley flashings and on low-slope applications to provide superior, watertight
protection against the back-up of water resulting from ice dams or wind driven
rain.
Features:
Self adhering: No hot asphalt or heat required
SBS modified asphalt provides elastic and self sealing properties
Glass fibre reinforced for strength
Non Slip surface to prevent slipping on sloped surfaces
No special application equipment required
Available in 3' x 65' or 3' x 75' rolls.
LOWSLOPE™ Roofing Products

Bakor's peel-and-stick LOWSLOPE™ Roofing
is easy to install and fully backed by our warranty for up to 20 years. For roof
areas down to ˝ in 12 pitch Bakor LOWSLOPE™ is the choice for real
protection.
Roofing membranes
Shingles are not recommended for low slope roofs (3/12 pitch or lower). That
is why Bakor invented Low Slope membranes. Low Slope is a self-adhered SBS
rubberized membranes with an aesthetically pleasing granulated finish. The
membrane easy to install and is durable. Backed by the best warranties in the
business, Low Slope is available in a One ply or Two ply format.
Product Description
Bakor Low Slope one ply SBS self-adhered Granulated roofing membrane is
composed of modified bitumen with fibrous glass reinforcement and a granulated
top surface. This membrane is specially designed for application over oriented
strand board (OSB) and plywood surface. Bakor Low Slope one ply SBS self-adhered
Granulated roofing membrane is resistant to all weather conditions and remains
permanently flexible even at low temperatures.
Acceptable deck materials
One Ply: minimum 15/32" plywood, oriented strand board (OSB)
Two Ply: minimum 15/32" plywood, oriented strand board (OSB), Plank or mill
decks
Features
-Easily applied, immediately waterproof
-Can be applied on any slope above ˝” in 12”
-No hot asphalt required
-Self-sticking lower surface; end laps bonded with rubberized mastic
-Non-woven fiberglass reinforcement
-Split back release film for ease of application
-15 Year Warranty on One Ply
-20 Year Warranty on Two Ply
Packing
-3’ x 36’ 10” Roll – net coverage of 100ft2 per roll
-Available in 3 colors black, grey and weathered wood

Recommended Accessories
- Bakor Polybitume Polymer Modified Sealing Compound 300ml
(Bakor recommends 1-1/2 tubes per roll of Low Slope Roofing)
View Installation Instructions for
Two Ply Self Adhering Roofing
View technical Data sheet on
Lowslope Two Ply Self Adhering Roofing
Aquatac Primer
Bakor Aquatac primer is specially designed for self-adhesive membranes such
as Bakor modifiedPLUS SA flashing application, Bakor Blueskin SA and Bakor
Blueskin WP 200 when applied to wood, preserved wood gypsum board, Dens Glass
Gold, polystyrene, masonry, concrete and metal. Bakor Aquatac Primer is the
primer of choice for those projects requiring a fast drying for the application
of membranes on vertical surfaces.
Features
-Quick drying
-Polymer emulsion based
-Environmentally friendly – Low VOC content
-High tack film provides positive adhesion to membrane
-Non-flammable during application
-Water based, no solvent odors
-Easy to apply
-Coverage: 6-12 m2 /litre
Blueskin®
Weather Barrier
Eliminates drafts and water penetration to your house.
Look into this before installing windows or skylights!

Bakor Blueskin Weather-Barrier is a
self adhering membrane consisting of an rubberized asphalt compound, integrally
laminated to a blue cross-laminated polyethylene film. This special
membrane is specially formulated for self adhesion to prepared substrate.
This is designed for use as a concealed self-adhered barrier against moisture or
air filtration and it is commonly used to provide a weather tight seal around
windows and doors, joints in sheathing, sealing around skylights and as a
flashing in residential construction.
Features
- Can be applied in temperatures as low as -12 degrees celcius
- Superior adhesion to prepared substrates of concrete, concrete blow, primed
steel, aluminum mill finish, galvanized metal, gypsum board and plywood
- Impermeable to air, moisture vapour and water
- Self adhesive, no flame required
- Excellent compatibility with Bakor adhesives and Bakor liquid air barrier
membranes
- Membrane is self sealing when penetrated with self tapping screws or nails
Available in 9" x 50', 6" x 50',
and 4"' x 50' (all 40 mil thickness)

Foundation Waterproofing
Prevent basement leaks by waterproofing your
foundation.
Bakor Blueskin WP200 is specially formulated to be self
adhering to a prepared substrate thereby providing a high-performance
waterproofing barrier. Bakor Blueskin WP200 Self Adhering Waterproofing
Membrane is designed for use as a self adhered sheet waterproofing membrane and
its primary use is to waterproof concrete foundations, plaza decks, tunnels, and
parking decks in both vertical and horizontal orientations. Bakor Blueskin
WP200 Self-Adhering Waterproofing Membrane is also ideal for use in interior
applications such as mechanical rooms, laboratories and wet-rooms.
Features
- Highly rubberized and flexible membrane
- Fully adhered system prevents lateral water movement
- No flame or special equipment required
- Minimal odour presence during application
Recommended Accessories
- Bakor Polybitume 300ml Polymer Modified Sealing Compound
- Bakor Aquatac Primer or Bakor Blueskin Primer

Blueskin Roof RF200
Guards the interior of your home against leaks caused
by ice or snow buildup and wind-driven rain!
Bakor Blueskin Roof RF200
Self-Adhered Roof Underlayment is an SBS modified bitumen membrane reinforced
with a blue polyethylene film. This membrane is specially suited for
self-adhering on sloped surfaces. Bakor Blueskin Roof RF200 Self-Adhered
Roof Underlayment is designed to be adhered direclty to roof decks or certain
insulation panels prior to the application of finished roof coverings including
architectural metal, shingles, cedar shakes or tile. Its primary function
is to serve a secondary waterproofing layer, in both residential and commercial
building applications, protecting the building's interior from damages caused by
water infiltration as a result of ice dam formation and wind driven rain.