Debris and other particles visible to
the naked eye
10 microns
Heavy atmospheric dust, flying ash
5-10 microns
Molds and pollen, average atmospheric
dust
1-5 microns
Bacteria, light, atmospheric dust
0.3-1 micron
Tobacco smoke, bacteria, metallic
fumes
Filter Specs
Merv Rating
MERV 17
MERV 12
MERV 8
Efficiency Level
at 0.3 micron
99.97%
30%
0%
at 1 micron
100%
72%
25%
at 10 microns
100%
100%
85%
Part #
04803
04804
04852
Evaluation
Excellent
Very Good
Good
Filters
REPLACEMENT HEPA FILTER "CLEAN-AIR" PRE-FILTERS For
whole-house air exchangers. Can help
prevent potential respiratory problems. 100% efficiency in trapping airborne
particles - including allergens like mold spores and animal dander (1 micron
and bigger). Captures microscopic allergens and pollutants, including smoke,
dust and smog. Traps potentially virus-carrying bacterial particles. Reduces
household dust. Includes: 1 true Hepa filter and 2 prefilters.
For use with: Venmar: HEPA 1000, HEPA 2000, HEPA 3000, HEPA
3100, HRV 2500, HRV 2600. For use with BROAN: HR 1.0, HF 2,0, HF 3.0,
HF 3.1, HR 2.5, HR 2.6 and all other products in this category. Lasts
12-18 months. If your unit is equipped with the
wall control, you should replace your HEPA filter when the control filter
maintenance light is on and replace only the prefilter when the light is
flashing. When there is no wall control, you must replace your HEPA filter
every 12-18 months and the prefilter every 6 months* (see the maintenance
calendar inside the unit). * under normal filter usage conditions, filter
duration may vary.
MERV 17. 99.7% efficiency
level at 0.3 micron. 100% efficiency level at 1 micron. 100% efficiency at
10 microns.
Sku 11613-30, Model 04803, 50.8cm x 40.6cm (20" x 16"), $124.99
eachBuy Now!
- FREE SHIPPING!
PLEATED
REPLACEMENT FILTER "CLEAN-AIR" 72%
efficiency in trapping airborne particles (1 micron and bigger). Helps to
reduce
household dust. Contains: 1 pleated filter and 2 prefilters. For whole-house
HEPA air purification systems and air exchangers. For use with: Venmar: HEPA 1000,
HEPA 2000, HEPA 3000, HRV 2500, and Guardian Plus: HF1.0, HF2.0, HF3.0, FR
2.5. Lasts 12-18 months (depending on usage). If your unit is
equipped with the wall control option, you should replace your pleated
filter when the control filter maintenance light is on and replace only the
prefilter when the light is flashing. If you do not have the wall control
option, you must replace your pleated filter every 12-18 months and the
prefilter every 6 months* (*under normal filter usage conditions, filter
duration may vary). 4.06cm x 5.08cm (16" x 20")
MERV 12. 30% efficiency level at 0.3 micron. 72%
efficiency level at 1 micron. 100% efficiency at 10 microns.
Sku 11613-48, Model 04804, $99.99
eachBuy Now!
- FREE SHIPPING!
"CLEAN AIR" WASHABLE FOAM REPLACEMENT FILTER Capture
up to 25% of particles of 1 micron and bigger. HEPA filters
contribute to the relief of allergy symptoms as well as asthma, chronic colds
and stubborn coughs. For use with Venmar HEPA 1000, HEPA 2000, HEPA 3000,
HRV 2500, Guardian Plus HF 1.0, HF 2.0, HF 3.0, HR 2.5. MERV 8. Washable
replacement filter. Contains 1 foam filter. Should be washed every 2
months, replacement once a year (depending on usage).
MERV 8. 0% efficiency level at 0.3 micron. 25%
efficiency level at 1 micron. 85% efficiency at 10 microns.
Sku 11613-55, Model 04852, 39.4cm x 49.5cm (15-1/2" x 19-1/2") $77.99 each Buy Now!
- FREE SHIPPING!
"CLEAN AIR" PRE-FILTERS (2) FOR HEPA FILTER Capture
up to 99.97% of particles, including as small as 0.3 microns. HEPA filters
contribute to the relief of allergy symptoms as well as asthma, chronic colds
and stubborn coughs. Easy installation. Designed for
units with a HEPA or pleated filter. Designed for the following Hepa air purification
systems: Venmar: Hepa 1000, 2000, 3000, 3100, HRV 2500,
2600, HEPA 3.2, THH 1.0; Broan: HF 1.0, HF 2.0, HF 3.0, HF 3.1, HR 2.5, HR
2.6. Contains 2 pre-filters (each pre-filter lasts
approx. 6 months).
Sku 11613-63, Model 05123,
18-15/16" x 14-7/8" (48.1cm
x 37.9cm), $19.99 each Buy Now!
REPLACEMENT FILTER
Replacement filter for Venmar exchanger model EA20200, EA1500, EA20100,
Pro100 and Pro200 and Guardian Plus 44993. Dimensions: 10-3/4" x 13-1/2" x
3/4".
Sku 12832-90, Model 11197, $20.99 each Buy Now!
REPLACEMENT FOAM FILTER for Air
Exchanger with Heat Recovery
Replacement foam filter for Venmar Air Exchanger with Heat Recovery Model
ER40205. Dimensions: 8" x 11-1/2" x 3/4"
AIR EXCHANGER WALL CONTROL For Broan
air exchanger series HF3.1 and HR2.6 and Guardian Plus series HF3.0 and
HR2.5. New wall control features and LCD screen and offers the following
options: automatic mode, outside temperature read, programmable minimum and
maximum outdoor temperatures when exchanging air with outside, 40 minutes
off - 20 minutes of air exchanging mode and 40 minutes recirculation - 20
minutes air exchanging mode. Adjustable screen brightness. No battery
needed. White plastic. (See 747-0289 for finishing plate).
Compatible with the following Broan Air Exchanger models: HR2.5, HR2.6,
HF3.0, HF3.1
Compatible with the following Venmar Air Exchanger models: HRV 2500, HRV
2600, HEPA 3000 and HEPA 3001
Note: The 40425 Broan Wall Control is the same as the 40415 Venmar Wall
Control so it can replace the 40415.
DECORATIVE FINISHING PLATE For air
exchanger wall control. Can only be used in case of replacement of the old
wall control C34 with the new model 40425 or 40415 (see 747-0313). White
plastic. Dimensions: 10.5" x 5.2" x 1".
Sku 74702-89, Model 40426, $8.99 each
Buy Now!
WALL ELECTRONIC CONTROL CMR
model. Designed for use with Broan HV1.5, (Guardian Plus
Series HF-3.0). 3 control modes (Regular, full power and
recirculation). Easy installation. Secure low-voltage circuit. Filter
maintenance indicator, fresh air indicator, easy operation. Low voltage
cable included (40' #22AWG). 2-year warranty.
This is also the same as the C34 Venmar Wall
Control and can be used for the Venmar EA1500 Air Exchanger
For Venmar PRO225 Air Exchanger/Heat Recovery Ventilator
The 11136 control works with a dehumidistat that
allows you to control the excess of humidity. If the selector is set above
the click, the unit will stop and if it is set below the click, the unit
will exchange on high speed with the outside until the desired humidity
level has been reached.
The optional 20-minute lighted push-button bathroom
control, no 12030 can be added (sold separately - we do sell this item)
ROUND AIR DIFFUSER Supply
and exhaust air diffuser. Fits 12.7cm (5") and 15.2cm (6") diameter pipe.
Fully adjustable. Easy to install. White plastic.
Sku 31370-98, Fits 4" x 5", Model VT0110, $9.79 each
Pricing including Shipping
Sku 31371-97, Fits 5" x 6", Model VT0111, $10.49 each
Pricing including Shipping
AIR DIFFUSER Plastic
white Premium Round diffuser. Wall or ceiling mount.
Sku 31301-27, 4", Model DR-04, $9.79 each
Pricing including Shipping
Sku 31301-35, 5", Model DR-05, $10.99 each
Pricing including Shipping
Sku 31301-43, 6", Model DR-06, $11.49 each
Pricing including Shipping
Sku 31301-50 8", Model DR-08, $18.49 each
Pricing including Shipping
Guardian Plus Air Exchanger Installation Kits
BASEMENT INSTALLATION KIT
Installation kit for Guardian HR2.5. This basement kit includes; 4 clamp
collars 30", 4 clamp 24", 1 outside port + one outside screen 3,8" x 7", 2
whisper registers 6", 1IFT 5" x 20', 1 NIFT 6" x 45', 1 tandem transition, 1
small installation bag.
Sku 26500-26, Model 15273, $209.99
each - Buy Now!
ATTIC INSTALLATION KIT Attic
installation kit for Guardian Plus HV1.5. This kit includes; 1 IFT 4" x 25',
1 NIFT 6" x 30', 2 soffit adaptors 4", 2 whisper registers 6", 2 clamp
collars 15-1/2", 6 clamp collars 30", 1 installation kit (screws and chains)
Sku 26503-23, Model EA20130, $219.99 each Buy Now!
INSTALLATION KIT FOR WHOLE-HOUSE HEPA AIR PURIFICATION SYSTEMS This
installation kit can be used with the Venmar Hepa 2000 and Hepa 3000 and
4997(HF2.0) and 44998 (HF3.0) Broan Nutone Guardian Plus. Includes: 4 tie
wraps 30", 4 tie wraps 24", 2 duct connectors 8" x 12", 2 duct connectors
baffles 8" x 12", 1 outside port backplate, 1 dual outside port 8.72" x
8.87", 1 outside port screen 3.8" x 7", 1 outside port screen 3.8" x 8.3",
20' insulated flexible duct kit UL 5", 45' uninsulated flexible duct 8", 1
tandem transition, 1 small bag containing: 2 x-mas tree pins 1/4" x 0.79", 4
screws #8-3/4", 8 screws #8-3/4", 4 screws #8-1 1/2", 8 plastic anchors
1/4", 1 1/4", 2 blue dot stickers and 2 red dot stickers. Use installation
kit.
We welcome all inquiries on our products. Please use
Feedback form to
contact us.
Please note that all prices in all categories are
listed in Canadian Dollars. All items are subject to 15% Harmonized Sales
Tax (HST) when shipped to Nova Scotia, 13% Harmonized Sales Tax (HST) when
shipped to New Brunswick, Newfoundland or Ontario, 12% Harmonized Sales Tax (HST)
when shipped to British Columbia. All other
provinces/territories are subject to 5% Goods and Service Tax (GST). International and United States sales are
tax exempt (duty and brokerage fees, if applicable, are the responsibility of
the purchaser).
Unless picked up at our location, all items are subject to applicable freight charges (to be quoted).
Not all items can be shipped due to weight and size factors. Items marked
free shipping are for within Canada and the USA (with the exception of remote
locations)). We do not
ship chemical products or insecticides. All prices
subject to change without notice. Not all items may be available at all
times. We reserve the right to choose our customers and to limit
quantities if needed. Website is also subject to error. If a pricing
error is discovered it will be fixed, however we are not obliged to sell for the
error. Website pricing may differ from in-store pricing.
We accept VISA, Mastercard or American Express. You can also send a money order
or check, in which case we will wait for it to clear prior to shipping out the
goods. In some cases, Paypal will be used as a payment method.
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
